T225 Series Axial High Temperature Solder (CSR09 Style)

Tantalum Through-Hole Capacitors – Hermetically Sealed
T225 Series Axial High Temperature Solder (CSR09 Style)
Overview
The KEMET T225 High Temperature Solder Series of solid
tantalum capacitors is especially designed for miniaturization
and employs a unique glass-to-metal compression end seal that
has no protruding eyelet. This flush end seal construction ideally
suits the T225 Series for all miniature high density packaging
applications. The capacitors consist of a dry porous tantalum
pellet, hermetically sealed in a solder coated metal case with
solder coated alloy 52 and solder coated nickel.
The internal design of these devices, as well as the hermetic
seal, includes high temperature solder (minimum melting point of
221°C). The content of tin in the solder does not exceed 97%. This
assembly is especially suited for temperature conditions where
solder may fail due to undesirable solder reflow.
Benefits
Applications
• Internal construction solder to resist up to 221ºC
• Qualified to MIL–PRF–39003 (CSR09 Style)
• Failure rate options: Graded - B, C, D, and G, and
Exponential - M, P, R, and S
• Surge current options D, E, and F
• Operating temperature range of -55˚C to +125˚C
• Capacitance values of 0.047 μF to 18 μF
• Tolerances of ±5%, and ±10%
• Voltage rating of 6 – 75 VDC
• Case sizes: A and B
• Taped and reeled per EIA Specification RS–296
• Marking per MIL–STD–1285
KEMET's T225 High Temperature Solder Series of solid tantalum
capacitors is especially designed for miniaturization.
The T225 series is approved to all ratings and failure rates of MIL–
PRF–39003/2.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
1
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Ordering Information
T
Capacitor
Class
T=
Tantalum
225
A
225
B
S
7200
Series
Case
Size
Capacitance Code
(pF)
Capacitance Rated Voltage
Tolerance
(VDC)
Failure Rate/Military
Product Only
Termination
Finish
Specification
A, B
First two digits
represent significant
figures. Third digit
specifies number of
zeros to follow.
J = ±5%
K = ±10%
Graded:
B = 0.1%/k hours
C = 0.01%/k hours
D = 0.001%/k hours
G = 1.0%/k hours
Exponential:
M = 1%/k hours
P = 0.1%/k hours
R = 0.01%/k hours
S = 0.001%/k hours
S = Standard
Hermetically
Sealed
Axial High
Temperature
Solder
K
010
006 = 6
010 = 10
015 = 15
020 = 20
035 = 35
050 = 50
075 = 75
All capacitors are sleeved
unless specified.
0100 = Without sleeve 7200
= Tape & Reel
7293 & 7443 = Ammo
4250 = 10 cycles, 25°C
after Weibull
4251 = 10 cycles, -55 &
85°C after Weibull
4252 = 10 cycles, -55 &
85°C before Weibull
Ordering Information – (CSR09 Style)
M39003
/02
3036
A
Capacitor Class
Slash
Dash Number
Surge Option
Military
Specification
Number
Specification
Sheet Number
Failure Rate
Level
A = C-4250
B = C-4251
C = C-4252
Blank - No surge
Orders should be entered by the military specification number, including the dash number and surge option letter (A, B or C).
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
DF (120 Hz at 25°C)
ESR and Impedance (100 kHz at 25°C)
-55°C to 125°C
0.047 – 18 μF at 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%)
6 – 75 V
Refer to Part Number Electrical Specification Table
Refer to Part Number Electrical Specification Table (for reference only)
Leakage Current
Refer to Part Number Electrical Specification Table (at rated voltage up to +85°C and 2/3 of rated
voltage applied at 125°C)
Failure Rate (MIL–PRF–39003, CSR09
capacitors only)
Approved failure rate: Graded G (1.0%/k hours), B (0.1%/k hours), C (0.01%/k hours), D (0.001%/k
hours) and Exponential M (1.0%/k hours), P (0.1%/k hours), R (0.01%/k hours), S (0.001%/k hours)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
2
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Dimensions – Inches (Millimeters)
Uninsulated
Insulated
Case
Size
D ±0.005 ±(0.13)
L
D
A
0.085
(2.16)
0.245 +0.015 (6.22 +0.38)
-0.010 (-0.25)
0.090 ±0.009
(2.29 ±0.23)
B
0.127
(3.23)
0.375 ±0.015 (9.53 ±0.38)
0.138 ±0.010
(3.51 ±0.25)
L
B
Wire Diameter
0.250 +0.031 (6.35 +0.79) 0.016 +0.005 (0.41 +0.13)
-0.015 (-0.38)
-0.001 (-0.03)
0.390 ±0.015
(9.91 ±0.38)
0.016 +0.005 (0.41 +0.13)
-0.001 (-0.03)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
3
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Table 1 – Ratings & Part Number Reference
MIL–PRF–39003 (CSR09) Capacitors
Rated
Rated
Voltage Capacitance
Dash Number Reference
Case
Size
Code
KEMET
Military Part
Number
DC
Leakage
DF % at
25°C
(See below for
part options)
T225A275J006(1)S
T225A275K006(1)S
T225B186J006(1)S
T225B186K006(1)S
T225A185J010(1)S
T225A185K010(1)S
T225A225J010(1)S
T225A225K010(1)S
T225B106J010(1)S
T225B106K010(1)S
T225B126J010(1)S
T225B126K010(1)S
T225B156J010(1)S
T225B156K010(1)S
T225A105J015(1)S
T225A105K015(1)S
T225A125J015(1)S
T225A125K015(1)S
T225A155J015(1)S
T225A155K015(1)S
T225B825J015(1)S
T225B825K075(1)S
T225A564J020(1)S
T225A564K020(1)S
T225A684J020(1)S
T225A684K020(1)S
T225A824J020(1)S
T225A824K020(1)S
T225A105J020(1)S
T225A105K020(1)S
T225B335J020(1)S
T225B335K020(1)S
T225B395J020(1)S
T225B395K020(1)S
T225B475J020(1)S
T225B475K020(1)S
T225B565J020(1)S
T225B565K020(1)S
T225B685J020(1)S
T225B685K020(1)S
T225A334J035(1)S
T225A334K035(1)S
T225A394J035(1)S
T225A394K035(1)S
T225A474J035(1)S
T225A474K035(1)S
T225B225J035(1)S
T225B225K035(1)S
T225B275J035(1)S
T225B275K035(1)S
µA at 25°C
Max/5 Minutes
0.6
0.6
1.4
1.4
0.6
0.6
0.6
0.6
2.0
2.0
2.0
2.0
2.0
2.0
0.6
0.6
0.6
0.6
0.6
0.6
1.8
1.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.6
0.6
0.6
0.6
0.6
0.6
1.4
1.4
1.4
1.4
120 Hz
Maximum
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
M
(1.0)
10010001100200021007000710080008100900091010001010110011101200121013001310140014101500151016001610170017101800181019001910200020102100211022002210230023102400241025002510260026102700271028002810290029-
P
(0.1)
10610061106200621067006710680068106900691070007010710071107200721073007310740074107500751076007610770077107800781079007910800080108100811082008210830083108400841085008510860086108700871088008810890089-
R
(0.01)
11210121112201221127012711280128112901291130013011310131113201321133013311340134113501351136013611370137113801381139013911400140114101411142014211430143114401441145014511460146114701471148014811490149-
S
(0.001)
11810181118201821187018711880188118901891190019011910191119201921193019311940194119501951196019611970197119801981199019912000200120102011202020212030203120402041205020512060206120702071208020812090209-
G
(1)
50015002500350045005500650075008500950105011501250135014501550165017501850195020502150225023502450255026502750285029503050315032503350345035503650375038503950405041504250435044504550465047504850495050-
B
(0.1)
20012002200320042005200620072008200920102011201220132014201520162017201820192020202120222023202420252026202720282029203020312032203320342035203620372038203920402041204220432044204520462047204820492050-
C
(0.01)
30013002300330043005300630073008300930103011301230133014301530163017301830193020302130223023302430253026302730283029303030313032303330343035303630373038303930403041304230433044304530463047304830493050-
D
(0.001)
40014002400340044005400640074008400940104011401240134014401540164017401840194020402140224023402440254026402740284029403040314032403340344035403640374038403940404041404240434044404540464047404840494050-
(see below for
part options)
µA at 25°C
Max/5 Minutes
120 Hz
Maximum
M
(1.0)
P
(0.1)
R
(0.01)
S
(0.001)
G
(1)
B
(0.1)
C
(0.01)
D
(0.001)
KEMET Part
Number
DC
Leakage
DF % at
25°C
Failure Rate Level (%/1,000 hours)
MIL–PRF–39003/2J
MIL–PRF–39003/2J
Exponential
VDC
µF
6
6
6
6
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
35
35
35
35
35
35
35
35
35
35
2.7
2.7
18.0
18.0
1.8
1.8
2.2
2.2
10.0
10.0
12.0
12.0
15.0
15.0
1.0
1.0
1.2
1.2
1.5
1.5
8.2
8.2
0.56
0.56
0.68
0.68
0.82
0.82
1.0
1.0
3.3
3.3
3.9
3.9
4.7
4.7
5.6
5.6
6.8
6.8
0.33
0.33
0.39
0.39
0.47
0.47
2.2
2.2
2.7
2.7
A
A
B
B
A
A
A
A
B
B
B
B
B
B
A
A
A
A
A
A
B
B
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
A
A
A
A
A
A
B
B
B
B
VDC
µF
Rated
Voltage
Rated
Capacitance
Case
Size
Code
Graded
MIL–PRF–39003 (CSR09) Capacitors
(1) To complete KEMET Part Number (T225), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the
exponential rate letter. Designates Reliability Level.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
4
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Table 1 – Ratings & Part Number Reference cont'd
MIL–PRF–39003 (CSR09) Capacitors
Rated
Rated
Voltage Capacitance
Dash Number Reference
Case
Size
Code
KEMET
Military Part
Number
DC
Leakage
DF % at
25°C
(See below for
part options)
T225A224J050(1)S
T225A224K050(1)S
T225A274J050(1)S
T225A274K050(1)S
T225B155J050(1)S
T225B155K050(1)S
T225B185J050(1)S
T225B185K050(1)S
T225A473J075(1)S
T225A473K075(1)S
T225A563J075(1)S
T225A563K075(1)S
T225A683J075(1)S
T225A683K075(1)S
T225A823J075(1)S
T225A823K075(1)S
T225A104J075(1)S
T225A104K075(1)S
T225A124J075(1)S
T225A124K075(1)S
T225A154J075(1)S
T225A154K075(1)S
T225A184J075(1)S
T225A184K075(1)S
T225B224J075(1)S
T225B224K075(1)S
T225B274J075(1)S
T225B274K075(1)S
T225B334J075(1)S
T225B334K075(1)S
T225B394J075(1)S
T225B394K075(1)S
T225B474J075(1)S
T225B474K075(1)S
T225B564J075(1)S
T225B564K075(1)S
T225B684J075(1)S
T225B684K075(1)S
T225B824J075(1)S
T225B824K075(1)S
T225B105J075(1)S
T225B105K075(1)S
T225B125J075(1)S
T225B125K075(1)S
µA at 25°C
Max/5 Minutes
0.6
0.6
0.6
0.6
1.4
1.4
1.4
1.4
0.6
0.6
0.6
0.6
0.6
0.6
1.8
1.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
1.0
1.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
0.6
0.6
0.6
0.6
0.6
0.6
1.4
1.4
1.4
1.4
120 Hz
Maximum
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
M
(1.0)
10300030103100311032003210330033103400341035003510360036103700371038003810390039104000401041004110420042104300431044004410450045104600461047004710480048104900491050005010510051-
P
(0.1)
10900090109100911092009210930093109400941095009510960096109700971098009810990099110001001101010111020102110301031104010411050105110601061107010711080108110901091110011011110111-
R
(0.01)
11500150115101511152015211530153115401541155015511560156115701571158015811590159116001601161016111620162116301631164016411650165116601661167016711680168116901691170017011710171-
S
(0.001)
12100210121102111212021212130213121402141215021512160216121702171218021812190219122002201221022112220222122302231224022412250225122602261227022712280228122902291230023012310231-
G
(1)
50515052505350545055505650575058505950605061506250635064506550665067506850695070507150725073507450755076507750785079508050815082508350845085508650875088508950905091509250935094-
B
(0.1)
20512052205320542055205620572058205920602061206220632064206520662067206820692070207120722073207420752076207720782079208020812082208320842085208620872088208920902091209220932094-
C
(0.01)
30513052305330543055305630573058305930603061306230633064306530663067306830693070307130723073307430753076307730783079308030813082308330843085308630873088308930903091309230933094-
D
(0.001)
40514052405340544055405640574058405940604061406240634064406540664067406840697070407140724073407440754076407740784079408040814082408340844085408640874088408940904091409240934094-
(see below for
part options)
µA at 25°C
Max/5 Minutes
120 Hz
Maximum
M
(1.0)
P
(0.1)
R
(0.01)
S
(0.001)
G
(1)
B
(0.1)
C
(0.01)
D
(0.001)
KEMET Part
Number
DC
Leakage
DF % at
25°C
Failure Rate Level (%/1,000 hours)
MIL–PRF–39003/2J
MIL–PRF–39003/2J
Exponential
VDC
µF
50
50
50
50
50
50
50
50
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
0.22
0.22
0.27
0.27
1.5
1.5
1.8
1.8
0.047
0.047
0.056
0.056
0.068
0.068
0.082
0.082
0.10
0.10
0.12
0.12
0.15
0.15
0.18
0.18
0.22
0.22
0.27
0.27
0.33
0.33
0.39
0.39
0.47
0.47
0.56
0.56
0.68
0.68
0.82
0.82
1.0
1.0
1.2
1.2
A
A
A
A
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
VDC
µF
Rated
Voltage
Rated
Capacitance
Case
Size
Code
Graded
MIL–PRF–39003 (CSR09) Capacitors
(1) To complete KEMET Part Number (T225), insert Graded failure rate: G for 1%/k hours, B for .1%/k hours, C for .01%/k hours, D for .001%/k hours or the
exponential rate letter. Designates Reliability Level.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
5
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Ripple Current/Ripple Voltage
Permissible AC ripple voltage is related to the ESR of the capacitor and the power dissipation capabilities of a particular case size.
Thermal capacities for the various case sizes have been determined empirically and are listed below.
Temperature Compensation Multipliers
for Maximum Power Dissipation
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T= Environmental Temperature
Permissible AC ripple current can be determined by the following:
I(max) = Z √P max/R
Case Size
Maximum Power
Dissipation (P max)
T2XX
A
0.09
0.070
B
0.100
0.090
C
0.125
–
D
0.180
–
Maximum Power Dissipation: 25°C Ambient
P max = maximum watts
R = ESR at specified frequency (ohms)
I = rms ripple current (amperes)
Z = capacitor impedance in ohms at the specified frequency
Optimum Solder Wave Profile
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
6
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Mounting
All encased capacitors will pass the Resistance to Soldering Heat Test of MIL–STD–202, Method 210, Condition C. This test simulates
wave solder of topside board mount product. This demonstration of resistance to solder heat is in accordance with what is believed to
be the industry standard. More severe treatment must be considered reflective of an improper soldering process. The above figure is a
recommended solder wave profile for both axial and radial leaded solid tantalum capacitors.
Capacitor Marking
Case B
Case A
Military Specification
Number
39003
02 - K
6003H J
316 +
AAAA
Specification Sheet
Number & K = KEMET
Military Dash Number
& J = January
Date Code &
Polarity
Lot Symbol
M39003
02
6003H J
31433
316 AAAA +
Military Specification
Number
Specification Sheet
Number
Military Dash Number
& J = January
Source Code
Date Code ,
Polarity & Lot
Symbol
Date Code
1st digit = Last number of Year
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
11 = 2nd week of March
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
7
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Storage
Tantalum hermetically sealed capacitors should be stored in normal working environments. While the capacitors themselves are quite
robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres,
and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel
force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not
exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres
should be free of chlorine and sulphur bearing compounds. For optimized solderability capacitors stock should be used promptly,
preferably within three years of receipt.
Tape & Reel Packaging Information
KEMET offers standard reeling of Solid Tantalum Capacitors for automatic insertion or lead forming machines per EIA Specification
RS-296E.
Table 2 – Packaging Quantity
Case Size
Standard Bulk Quantity
A/B
50/Tray
A
300/Box
B
150/Box
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
8
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Figure 2
Figure 3
12"
(30.48cm)
*
0.059" to 0.315"
Greater Than
Component
Length
White (+)
(Anode)
Blue ( –)
(Cathode)
0.047" Maximum
(1.20)
Hub
0.655" ±0.010
Hole
(15.9 ±0.25)
*
3 1 /4 "
(82.6)
1/ "
8
(3.18)
See Table 3
"B"
See Table 3
"A"
0.250" Nominal
(6.35)
Table 3 – Tape Dimensions
Component Body Diameter
Component
Pitch "A"
Inside Tape Spacing "B" ±1.5 mm (0.059")
0.020" or (±0.5 mm)
I
II
III
0" (0 mm) to 0.197" (5 mm)
0.200" or (5 mm)
2.062"
2.500"
2.874"
0.197" (5.01 mm) to 0.394" (10 mm)
0.400 or (10 mm)
(52.4 mm)
(63.5 mm)
(73 mm)
CapacitorsarereeledsothatpositiveleadsareorientedasshowninFigure3.Kraftpaper(50lb.testminimum)isinsertedbetween
thelayersofcapacitorswoundonreelsforcomponentpitch≤0.200"sizesandcorrugatedpaper(70lb.testminimum),singlefacedis
insertedforcomponentpitch≥0.400"sizes.Capacitorleadlengthmayextendonlyamaximumof.031"(0.8mm)beyondthetape’s
edges.Capacitorsarecenteredinarowbetweenthetwotapesandwilldeviateonly±0.031"(0.79mm)fromtherowcenter.Figures
1and2showtheKEMETstandardchipboardtapereel.Aminimumof36"(91.5cm)leadertapeisprovidedateachendofthereeled
capacitors. Universal splicing clips are used to connect the tape.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
9
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
SassoMarconi,Italy
Tel:39-051-939111
Northeast Asia
Hong Kong
Tel:852-2305-1168
MailingAddress:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel:389-2-55-14-623
Shenzhen, China
Tel:86-755-2518-1306
www.kemet.com
Tel:864-963-6300
Fax:864-963-6521
Central Europe
Landsberg,Germany
Tel:49-8191-3350800
Corporate Offices
FortLauderdale,FL
Tel:954-766-2800
Kamen,Germany
Tel:49-2307-438110
North America
Northern Europe
Harlow, United Kingdom
Tel:44-1279-460122
Taipei, Taiwan
Tel:886-2-27528585
Espoo,Finland
Tel:358-9-5406-5000
Southeast Asia
Singapore
Tel:65-6701-8033
2835KEMETWay
Simpsonville, SC 29681
Southeast
LakeMary,FL
Tel:407-855-8886
Northeast
Wilmington,MA
Tel:978-658-1663
Central
Novi,MI
Tel:248-306-9353
Beijing, China
Tel:86-10-5877-1075
Shanghai, China
Tel:86-21-6447-0707
Seoul, South Korea
Tel:82-2-6294-0550
Penang,Malaysia
Tel:60-4-6430200
Bangalore, India
Tel:91-806-53-76817
West
Milpitas,CA
Tel:408-433-9950
Mexico
Guadalajara, Jalisco
Tel:52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
10
Tantalum Hermetically Sealed/Axial Through-Hole Capacitors
T225 Series High Temperature Solder
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill
occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective
circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot
berequired.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2065_T225 • 3/6/2015
11