Ferrite Inductors Conformally Coated SBCP Coils Overview Applications Ferrite power inductors are useful in various fields and suitable for DC/DC converters and noise filters. Typical applications include LED lighting, xDSL modems, copying machines, flat TVs, smart meters and power supplies. Benefits • • • • • • Drum core construction Nickel-Zinc (NiZn) ferrite core Magnetic non-shield type Operating temperature range of up to +105°C Available in tape and reel RoHS Compliant Ordering Information SBCP– 47HY 150 H B Series Core Size Inductance Code (µH) External Tube Packaging Type SBCP Outer size x height 47HY = φ 4.5 × 7.0 87HY = φ 8.0 × 7.5 80HY = φ 8.0 × 10.0 11HY = φ 11.0 × 11.0 14HY = φ 11.0 × 14.0 First two digits represent significant figures. Third digit specifies number of zeros. Blank = None H = Presence (only for core sizes 87HY, 80HY and 11HY) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com B = Bulk Blank = Tape and reel One world. One KEMET L9008_SBCP • 9/4/2015 1 10 RoHS Compliant] [RoHS Compliant] 0 0 0.5 1 Idc (A) 1.5 2 2.5 Leaded Inductors – Conformally Coated SBCP Coils BCP-87HY P Type Series（SBCP-87HY□□□H） Inductance RatedSeries current SBCP-47HY Dimensions – MillimetersDC resistance at 10 kHz, 1mA （Ａ） （Ω） Model Current (Reference value) （Ａ） ΔT=40℃ DimensionsΔT=20℃ of indented square hole plastic tape L change rate–10% max. Ｌ（μH） Tape10.20 W W0 W1 H W2 7.00 6.10 P4.80 P0 P1 ± 1.0 4.30± 0.3 ± 0.7 12.7 3.4012.7 5.1 2.40 2.20 1.80 1.50 1.20 1.00 0.94 0.87 0.70 0.57 0.47 H0.39 D0 1 0.32 Maximum ±0.2 0.27 3.5±0.5 1.0 max. 7.5 max. H1 6.30Hole Plastic 0.02 SBCP-87HY1R0H 1.0 30% SBCP–47HY Series Dimensions4.50 of Indented Square hape and Dimensions 5.80 0.02 SBCP-87HY1R5H 1.5 30% △h P 4.20 ø5.0 max. 5.60 4.00 0.03 SBCP-87HY2R2H 2.2 30% 4.40 3.20 0.03 SBCP-87HY3R3H 3.3 30% 4.40 3.20 0.03 SBCP-87HY4R7H 4.7 20% P1 F 2.80 3.90 0.04 SBCP-87HY6R8H 6.8 20% d 2.30 3.20 0.05 SBCP-87HY100H 10 20% 2.90 2.10 SBCP-87HY150H 15 20% 0.06 2.60 1.90 SBCP-87HY220H 22 20% 0.08 2.10 1.50 SBCP-87HY330H 33 20% 0.12 D0 1.80 1.30 SBCP-87HY470H 47 20% 0.15 1.60 1.16 SBCP-87HY680H 68 10% 0.19 P0 1.50 1.10 SBCP-87HY820H 82 10% 0.23 SBCP-87HY101H 100 10% *Lead: hard copper wire 0.30 0.90 1.20 (ø0.5) 1.10 0.79 0.39 SBCP-87HY151H 150 10% 0.91 0.65 0.57 SBCP-87HY221H2.5±0.5 220 10% 0.70 0.50 0.92[mm] SBCP-87HY331H 330 10% 10% P 0.58 SBCP-87HY471H P P470 F 1.30 W W0.42 W1 W H 0 1 0 2 0.46 0.33 1.66 SBCP-87HY681H 680 10% ±1 ±0.3 ±0.52.82 +1, −0.5 Minimum +0.2, −0 0.35 0.25 +0.75, −0.5 Maximum SBCP-87HY102H 1000 10% ±0.7 mbering System DIP Type 12.7 12.7 age: Soft lead・bulk 4,000pcs/box 5.1 2.5 18 12.5 9 3 18 29.5 ø4 F W W0 W1 W2 H ± 0.5 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, 2.5 18 12.5 9.0 3.0 18 d Δh ø 0.5 ±2 0 lead・bulk 500pcs/AMMO pack，2,000pcs/box ① Series P -Pin47HY 150 B � � � ② Core size : Outer size x height （φ4.5×7） SBCP-87HY Series ③ Inductance :15×10 =15（μH） ape and Dimensions 0 Packaging type :（B）indicates bulkSquare type. ④Dimensions ●SBCP-87HY Series （SBCP-87HY□□□H） SBCP–87HY Series of Indented Holetape Plastic Dimensions of indented square hole plastic No indication for tape type. max. P wire) SBCP-47HY680B 70 50 40 30 D0 5.0 0.5 60 * For bulk type SBCP-47HY470B * Lead pitch is value at the root end. P 0 P - 87HY - 101 0 H B 0.5 �±1.0 � � � 12.7 P0 ±0.3 12.7 1 P1 1.5 Idc (A)±0.7 3.85 H SBCP-87H m 28 [mm] SBCP-47HY220B SBCP-47HY100B 20 10 P0 SBCP-47HY330B bering System F W W0 W1 W2 H D0 ± 1.0 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 ± 0.2 5.0 18 12.5 9.0 3.0 18 ø4.0 W (PB 80 d W0 ø0.6 P1 ± 0.7 3.85 W1 Inductance (H) 90 SBCP-47HY101B *3.5 –+1.0 0.5 100 P0 ± 0.3 12.7 W2 F P1 at 25˚C 1 0 1Measurement conditions: 10kHz, 1mA 110 P ± 1.0 12.7 H1 8.5 max. 1 0 1 C-Superposed Characteristics Tape h H ø9.5 F W W W W H H 0 1 2 1 ① Series 2 2.5 ② Core size x height) ±1 size (Outer +1, −0.5 Minimum +0.75, −0.5 Maximum +0.2, −0 Maximum Model numbers and Core sizes 5 18 12.5 9 3 18 28.5 The model number (5 digits) consists of core size and inductance as shown below. Model d Δh ±0.2 ø4 ø 0.6 ±2 0 Core size [mm] SBCP-87HY Ｈ D0 ø8.0 7.5 ③ Inductance: 10×101=100（μH） ④ Presence of external tube: H shows presence. ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. CP-47HY Series *The presence of an external tube may not be indicated on the surface of sample products. ensions of indented square hole plastic tape △h P P0 ± 0.3 12.7 P1 ± 0.7 5.1 F W W0 W1 W2 H H1 ± 0.5 +1.0, –0.5 min. +0.75, –0.5 max. +2.0, –0 max. 2.5 18 12.5 9.0 3.0 18 29.5 D0 ± 0.2 ø4.0 d h ± 2.0 ø0.5 0 W W2 W0 W1 H F d H1 Inductors VOL.11 P1 [mm] P ± 1.0 12.7 D0 P0 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 2 SBCP-80HY101H 100± 10% SBCP-80HY151H 150± 10% SBCP-80HY221H 220± 10% SBCP-80HY331H 330± 10% SBCP-80HY471H 470± 10% SBCP-80HY681H 680± 10% Leaded Inductors – Conformally Coated 10% SBCP Coils SBCP-80HY102H 1000± [RoHS [RoHS Compliant] Compliant] DIP Type Package: Bulk・4,000pcs/box ●SBCP-11HY Series（SBCP-11HY□□□H） Tape & reel・500pcs/AMMO pack 2,000pcs/box Dimensions – Millimeters cont’d Inductance L (μH) Model Shape and Dimensions at 10 kHz, 1mA DC resistance (Ω) max. 1.60 1.20 1.00 0.85 0.71 0.58 0.48 1.50 1.40 1.20 0.98 0.91 0.70 0.56 1.10 1.00 0.90 0.70 0.65 0.50 0.40 0.35 0.41 0.52 0.75 0.95 1.40 1.89 Rated current (A) ΔT=20˚C Current (Reference value) (A) ΔT=40˚C L change rate–10% SBCP-80HY Series SBCP - 80HY - 101 0H B Package: Bulk・2,000pcs/box W2 W W0 *3.5 +1.0 –0.5 W1 H 11 H1 max. 7.20 5.00 0.02 SBCP-11HY1R5H 1.5± 30% ●SBCP-80HY Series（SBCP-80HY□□□H） SBCP–80HY Series Dimensions of Indented Square Holetape Plastic Dimensions of indented square hole plastic 6.70 4.70 0.02 SBCP-11HY2R2H 2.2± 30% ø9.5 max. 3.3± 20% h 6.30 SBCP-11HY3R3H 0.02 P4.40 5.80 4.10 SBCP-11HY4R7H 4.7± 20% 0.03 5.10 3.60 SBCP-11HY6R8H 6.8± 20% 0.03 1 0 1 4.50 3.10 SBCP-11HY100H 10± 20% 0.04 4.10 2.80 SBCP-11HY150H 15± 20% 0.05 1 0 1 P1 F 3.60 2.50 SBCP-11HY220H 22± 20% 0.06 d 2.30 3.30 SBCP-11HY330H 33± 20% 0.07 1 0 1 2.90 2.00 SBCP-11HY470H 47± 20% 0.10 10% 2.60 1.80 SBCP-11HY680H 68± 0.12 * For bulk type ø0.6 1.90 1.30 SBCP-11HY101H 100± 10% * Lead pitch is value 0.19at the (PB wire) D0 root end. 1.60 1.10 SBCP-11HY151H 150± 10% 0.26 1.30 0.95 SBCP-11HY221H 220± 10% 0.40 5.0±0.5 1.00 0.74 SBCP-11HY331H 330± 10% 0.60 [mm] P0 0.93 0.66 SBCP-11HY471H 470± 10% 0.76 0.77 0.55 SBCP-11HY681H 680± 10% 1.00 Numbering System SBCP-11HY102H 1000± P P P 10% F W1.70 W W 0.42 W H0.60 H 1 0 1 2 1 ① Series � � � � � ② Core size (Outer size x height) ±1 ±0.3 ±0.7 ±1 +1, −0.5 Minimum +0.75, −0.5 Maximum +2, −0 Maximum ･ Tape & reel・400pcs/AMMO pack 1,600pcs/box ･ Operating temperature range: －20 to +105℃ (incl. coil heat) Model numbers and Core sizes 12.7 12.7 3.85 5 18 model +number 12.5 (5 bulk 9 3 18 31 ･ Storage conditions: －5 to +40℃, 40to60% RH (in tape status), 85℃ (in status) The－20to digits) consists of core size and inductance as shown below. ･ Do NOT expose to direct sunlight Model Core size [mm] DIP Type SBCP-80HY Ｈ Shape and Dimensions ④ Presence of external tube: H shows presence. ●SBCP-11HY Series（SBCP-11HY□□□H） Dimensions ofofindented square hole Hole plasticPlastic tape SBCP–11HY Series Dimensions Indented Square ø12.5 0 ±0.2 ø4 P0 ± 0.3 12.7 P1 ± 0.7 3.85 F W W0 ± 1.0 +1.0, –0.5 min 5.0 18 12. d Δh ø 0.6 ±2 0 1 ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. max. 18.50 14.60 12.10 9.60 P 7.90± 1.0 12.7 6.40 5.40 4.40 3.60 3.00 2.40 2.00 1.60 1.40 1.10 D 0.96 ø8.0 10.0 Series ③ Inductance: 10×10SBCP-11HY =100（μH） 25.30 Tape 21.40 Tape h P *The presence of an external tube may not be indicated on the surface of sample products. 5.0±0.5 Numbering System P P SBCP - 11HY - 1010 H B � ±1� 12.7 � � � ±0.3 12.7 F W ± 1.0 +1.0, –0.5 m 5.0 18 1 D0 [mm] P1 F ±0.7 3.85 ±1 5 W W * For bulk type * Lead pitch is value at the root end. W0 ø0.6 (PB wire) P1 ± 0.7 3.85 W2 d P0 ± 0.3 12.7 W1 *3.5+1.0 –0.5 94 H1 P1 F Power Inductors VOL.11 1 0 1 P ± 1.0 12.7 H 1 max. 0 12 1 P0 W W W H H D ① Series 0 1 2 1 0 ② Core size (Outer size x height) +1, Model −0.5 numbers Minimum +0.75, −0.5 Maximum +2, −0 Maximum ±0.2 and Core sizes 18 12.5 (5 digits) 9consists of core 3 size and inductance 18 32 below. ø 4 The model number as shown Model Δh ø 0.6 ±2 0 Core size [mm] SBCP-11HY Ｈ d ø11.0 11.0 ③ Inductance: 10×101=100（μH） ④ Presence of external tube: H shows presence. ⑤ Packaging type: No indication for tape type. ;B; indicates bulk type. *The presence of an external tube may not be indicated on the surface of sample products. Power Inductors VOL.11 96 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 3 P Type Leaded Inductors – Conformally Coated SBCP Coils Dimensions – Millimeters cont’d Shape and Dimensions SBCP–14HY Series 1.0 3.5+ - 0.5 15.0 max. ø12 max. *Lead: hard copper wire (ø0.6) 5.0±0.5 [mm] Table 1A – Ratings & Part Number Reference mbering System 100 B � ① Series ② Core Inductance L size : Outer size x height（φ11×14） DC Resistance Rated Current (µH) at 10 ③kHz, Inductance：10×10 =10（μH） (Ω) Maximum (A) 1 mA ④ Packaging type：[B] indicates bulk type. � � Part Number SBCP-47HY2R2B 2.2 ±20% SBCP-47HY3R3B SBCP-47HY6R8B DC-Superposed Characteristics SBCP-47HY100B SBCP-47HY102B Inductance (μH) 40 30 4 6 8 10 12 Idc (A) 3.20 3.3 ±20% 37 m 2.30 2.28 3.21 2.70 6.8 ±20% 52 m 1.90 1.92 2.71 1.93 10 ±20% 67 m 1.60 1.69 2.38 1.60 0.29 0.39 0.27 0.15 0.21 0.16 330 ±10% 1.80 1000 ±10% 6.00 SBCP-14HY3R3B SBCP-14HY1R2B 2 L –10% (85ºC) 3.66 SBCP-14HY100B 0 ΔT = 40˚C 2.59 20 0 ΔT = 20˚C 2.60 SBCP-14HY330B 10 0 29 m Measuring instrument : HP4284A(10kHz、1mA) SBCP-47HY331B 50 Current (Reference Value) (A) 14 16 18 20 0.27 550 500 Measuring instrument : HP4284A(10kHz、1mA) 0.15 450 Inductance (μH) CP - 14HY SBCP-14HY471B 400 350 SBCP-14HY391B 300 SBCP-14HY331B 250 200 SBCP-14HY151B 150 100 50 22 0 SBCP-14HY101B 0 0.5 1 1.5 2 Idc (A) 2.5 3 3.5 4 Measuring instrument : HP4284A(10kHz、1mA) 12000 Inductance (μH) 10000 SBCP-14HY103B 8000 SBCP-14HY682B 6000 SBCP-14HY472B 4000 SBCP-14HY332B SBCP-14HY222B 2000 SBCP-14HY102B 0 0 0.20 0.40 0.60 Idc (A) 0.80 1.00 1.20 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 4 Leaded Inductors – Conformally Coated SBCP Coils Table 1B – Ratings & Part Number Reference Current (Reference Value) (A) Part Number Inductance L (µH) at 10 kHz, 1 mA DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C ΔT = 40˚C L Change Rate -10% SBCP-87HY4R7H SBCP-87HY6R8H SBCP-87HY101H SBCP-87HY681H SBCP-80HY100H SBCP-80HY470H SBCP-80HY680H SBCP-80HY820H SBCP-80HY101H SBCP-80HY331H SBCP-80HY102H SBCP-11HY470H SBCP-11HY101H SBCP-11HY681H SBCP-14HY221B SBCP-14HY331B SBCP-14HY102B SBCP-14HY222B SBCP-14HY332B 4.7 ±20% 6.8 ±20% 100 ±10% 680 ±10% 10 ±20% 47 ±10% 68 ±10% 82 ±10% 100 ±10% 330 ±10% 1000 ±10% 47 ±20% 100 ±10% 680 ±10% 220 ±10% 330 ±10% 1000 ±10% 2200 ±10% 3300 ±10% 0.03 0.04 0.30 1.66 0.05 0.13 0.16 0.24 0.35 0.75 1.89 0.10 0.19 1.00 0.31 0.38 1.16 2.36 2.42 3.20 2.80 0.90 0.33 2.90 1.90 1.70 1.30 1.10 0.70 0.40 2.00 1.30 0.55 1.05 0.95 0.59 0.38 0.33 4.40 3.90 1.20 0.46 4.00 2.60 2.30 1.80 1.50 0.98 0.56 2.90 1.90 0.77 1.51 1.35 0.82 0.54 0.46 4.30 3.40 0.87 0.32 5.30 2.20 1.80 1.70 1.60 0.85 0.48 4.40 3.00 1.10 2.20 1.84 1.01 0.69 0.57 Part Number Inductance L (µH) at 10 kHz, 1 mA DC Resistance (Ω) Maximum Rated Current (A) ΔT = 20˚C Current (Reference Value) (A) ΔT = 40˚C L Change Rate -10% Packaging Series SBCP-47HY SBCP-87HY SBCP-80HY SBCP-11HY SBCP-14HY Packaging Type Pieces per Box Bulk Tape & Reel Bulk Tape & Reel Bulk Tape & Reel Bulk Tape & Reel Bulk 6,000 4,0001 4,000 2,0002 4,000 2,0002 2,000 1,6003 1,500 The box contains 4 reels of 1,000 pieces each The box contains 4 reels of 500 pieces each 3 The box contains 4 reels of 400 pieces each 1 2 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 5 Leaded Inductors – Conformally Coated SBCP Coils KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 6 Leaded Inductors – Conformally Coated SBCP Coils Disclaimer This product has been made available through a Private Label Agreement and a Development and Cross-Licensing Agreement between KEMET and NEC TOKIN to expand market and product offerings for both companies and their respective customers. For more information, please visit http://www.kemet.com/nectokin. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com L9008_SBCP • 9/4/2015 7