FLLE2 … PV DC EMI Filters for PV Inverters Overview This filter series is intended to be used in Photo Voltaic applications between the solar panel and the inverter system. The filters are optimized in geometry and for power loss. They are also adapted to attenuate high frequency noise that may be degrading life time of the solar panels and as will as well reduce the radiation of EMI noise that may emerge from the panels. Filters without Y-capacitors to protected earth are available on request. As a capacitor manufacturer, KEMET is only using high quality capacitors in its filter series. 1200 VDC 25 – 1600 A 55°C -40°C to +100°C 40/100/21 P -> P 3000 VDC P -> E 3600 VDC + + _ _ PE PE PV ARRAY Rated voltage Rated current Rated temperature Temperature range Climate category Voltage test INVERTER Technical specifications The FLLE2…PV-series is designed according to IEC/EN 60939 and UL 1283. Rated current @ 55°C (A) 25 50 75 100 150 250 400 600 800 1000 1600 Part Number FLLE2025APVR1 FLLE2050APVR1 FLLE2075APVR1 FLLE2100APVR1 FLLE2150APVR1 FLLE2250APVI1 FLLE2400APVI1 FLLE2600APVI1 FLLE2800APVI1 FLLE21K0APVI1 FLLE21K6APVI1 Power loss @ 25°C/DC (W) 8 12 16 20 30 10 15 25 30 45 70 Weight (kg) 1 2 2 3 4 5 7 7 10 10 16 NOTE: For filters without Y-capacitors substitube PV with PX in the part number. Typical insertion loss 25 to 75 A Sym 100 and 150 A Sym Asym 250 to 1600 A Asym Sym dB 100 dB 100 80 80 80 60 60 60 40 40 40 20 20 20 dB 100 0 0.01 0.1 1 10 Asym without Y-cap. May 2014 100 MHz 0 0.01 0.1 1 10 Asym without Y-cap. 100 MHz 0 0.01 0.1 Asym 1 10 100 MHz Asym without Y-cap. KEMET EMC Filters 1 FLLE2 … PV DC EMI Filters for PV Inverters Mechanical dimensions FLLE2 … PVI1 Busbar connections Z L FLLE2 … PVR1 Terminal blocks Z W Z L Z W M U H H Y X R3 (x4) W1 W2 L1 L2 ØN W1 Ø12 (x6) L1 Terminal blocks – wire dimensions 25A 16/10mm² (solid/flexible) 50A 35/25 75A 35/25 100A 50/50 150A 95/95 ØN K I J I 250 to 1000A 1600 A Part Number FLLE2025APVR1 FLLE2050APVR1 FLLE2075APVR1 FLLE2100APVR1 FLLE2150APVR1 FLLE2250APVI1 FLLE2400APVI1 FLLE2600APVI1 FLLE2800APVI1 FLLE21K0APVI1 FLLE21K6APVI1 L 140 170 170 190 220 300 300 300 300 300 300 W2 W 80 95 95 125 140 130 140 140 150 150 150 H 65 80 80 95 115 110 110 110 140 140 150 L1 170 200 200 220 250 130 130 130 130 130 130 L2 110 110 110 110 110 110 W1 45 60 60 80 100 155 165 165 175 175 175 Dimensions in mm W2 U X Y 60 75 75 100 120 180 70 5 20 190 70 6 25 190 70 8 25 200 70 8 40 200 70 8 40 200 70 10 60 Z 25 39 39 45 50 58 58 58 65 65 110 I 15 15 15 20 20 17 J 43 K N 26 9 10.5 10.5 14 14 14 M M5 M6 M6 M8 M10 M10 M10 M10 M12 M12 M12 Legal disclaimer notice All product specifications, statements, information and data (collectively, the “information”) are subject to change without notice. products is given gratis, and we assume no obligation or liability for the advice given or results obtained. All information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that failure of an electrical component does not result in a risk of personal injury or property damage. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their applications. Any technical advice inferred from this information or otherwise provided by us with reference to the use of our May 2014 Althrough all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not required KEMET EMC Filters 2