KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Overview The KEMET Tantalum Stack Polymer (TSP) Electrolytic is designed to provide the highest capacitance/voltage ratings in a surface mount configuration. KEMET’s T540 COTS Polymer Electrolytic for High Reliabilty Applications capacitors are utilized in stacks of 2, 3, 4 and 6 components to achieve a broad range of capacitance and voltage ratings. The T540 COTS offers component level surge current testing options and standard and low ESR options. As with other KEMET KO-CAPs, this series may be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of greater or equal to 10 volts and up to 80% of rated voltage for part types greater than 10 volts. Stacking configurations allow for custom capacitance/ voltage solutions and very low ESR options. The TSP series is the first polymer electrolytic capacitor available with failure rate options as defined by KEMET's Polymer Electrolytic Reliability Assessment method (PERA). The PERA method utilizes accelerated conditions (voltage & temperature) applied to board mounted samples to assess long term device reliability.The failure rates available are B (0.1%/Khrs.), C (0.01%/ Khrs.) and D (0.001%/Khrs). The PERA method was developed based on over ten (10) years of research and is described in numerous papers available on www.kemet.com.Custom stacking solutions are also available with other KEMET Polymer Electrolytic Surface Mount products. Please contact your KEMET Application Engineer for availability. Benefits • • • • • • • • • • • • • • Polymer cathode technology High capacitance Surface mountable Capacitance values of 66 µF to 4080 µF Capacitance can be custom specified Voltage ratings of 3 VDC to 16 VDC High volumetric efficiency Ultra low ESR Surge capability Operating temperature range of -55˚C to +125˚C Laser-marked case Use up to 90% of rated voltage for part types ≤ 10 volts Use up to 80% of rated voltage for part types > 10 volts KEMET's PERA method testing Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include decoupling and filtering in a variety of market segments. The T540 Polymer COTS stack devices can be utilized in military and aerospace applications. Other KEMET series can be utilized in filtering and decoupling applications to service various market segments. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 1 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. Ordering Information T SP 2D 207 Capacitor Class Series Case Size Capacitance Code (pF) T= Tantalum Stacks Polymer Cathode M 010 A H Capacitance Rated Voltage Failure Rate/ Termination Tolerance (VDC) Design Finish 2B, 3B, First two digits M = ±20% 4B, 6B, represent significant 2D, 3D, figures. Third digit 4D, 6D specifies number of zeros. 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 A = N/A H = Standard Solder Coated (SnPb 5% Pb minimum) 65 20 D540 Surge ESR C-Spec 2 65 = No Surge 66 = 10 cycles at 25°C 67 = 10 cycles at -55°C and 85°C 10 = ESR Standard 20 = ESRLow Designates discrete component series. D540 = T540 Note: These TSP Stacks are specific to T540 COTS. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55°C to 125°C 66 – 4080 μF @ 120 Hz/25° C M Tolerance (20%) 3 – 16 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.1 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 2 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Qualification Test Condition Characteristics Δ C/C Endurance Thermal Shock Surge Voltage Surge Voltage Mechanical Vibration 105°C @ rated voltage, 2,000 hours 125°C @ 2/3 rated voltage, 2,000 hours KEMET specified test, mounted, -55C° to 125° C, 5 cycles 85° C, 1.15 x rated voltage 1,000 cycles 125°C, 0.77 x rated voltage 1,000 cycles MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within -20/+10% of initial value DF ≤ initial limit DCL 1.25 x IL @125° C ESR 2 x initial limit Δ C/C Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10 of initial value DF Within initial limits DCL Within initial limits © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 3 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC TSM2 TSP2 TSM2 TSP2 Dimensions – Millimeters (Inches) Metric will govern TSP2 2B 2D L W H W2 H2 P 4.1 ±0.38 (0.162 ±0.015) 8.0 ±0.38 (0.315 ±0.015) 3.1 ±0.2 (0.122 ±0.008) 4.4 ±0.2 (0.174 ±0.008) 4.3 ±0.38 (0.170 ±0.015) 6.2 ±0.38 (0.245 ±0.015) 2.3 ±0.2 (0.090 ±0.008) 3.0 ±0.2 (0.120 ±0.008) 3.1 ±0.38 (0.124 ±0.015) 4.8 ±0.38 (0.192 ±0.015) 0.76 ±0.38 (0.030 ±0.015) 1.9 ±0.38 (0.075 ±0.015) 3D TSM2 TSP2 TSM2 TSP2 TSP4 L W H W2 H2 P 4.1 ± 0.38 (.162 ± .015) 8.0 ± 0.38 (.315 ± .015) 3.1 ± 0.2 (.122 ± .008) 4.4 ± 0.2 (.174 ± .008) 6.3 ± 0.38 (.248 ± .015) 9.2 ± 0.38 (365 ± .015) 2.3 ± 0.2 (.090 ± .008) 3.0 ± 0.2 (.120 ± .008) 5.3 ± 0.38 (.210 ± .015) 7.7 ± 0.38 (.304 ± .015) 0.76 ± 0.38 (.030 ± .015) 1.9 ± 0.38 (.075 ± .015) SIDE VIEW L W SIDE VIEW ANODE (+) END VIEW L Case Code 4B P 4D P TSM3 TSP3 TSM3 TSP6 TSP3 4.1 ± 0.38 (.162 ± .015) 8.0 ± 0.38 (.315 ± .015) 6.1 ± 0.2 (.242 ± .008) 8.9 ± 0.2 (.350 ± .008) 6B 6D P 4.3 ± 0.38 (.170 W ±2 .015) 6.2 ± 0.38 (245 ± .015) H2 ANODE (+) END VIEW L W W2 H2 5.3 ± 0.2 (.210 ± .008) 7.4 ± 0.2 (.292 ± .008) W2 SIDE VIEW L Case Code H H ANODE (+) END VIEW W H2 W2 P W2 H2 SIDE VIEW ANODE (+) END VIEW L W SIDE VIEW ANODE (+) END VIEW L W H H2 H P H2 W2 SIDE VIEW P ANODE (+) END VIEW W2 L SIDE VIEW W W SIDE VIEW H W ANODE (+) END VIEW W L KEMET H4 Component Stack Dimensions L SIDE VIEW TSM4 TSP4 TSM4 TSP4 ANODE (+) END VIEW W P TSM3 TSP3 TSM3 TSP3 KEMET 3 Component Stack Dimensions 3B L H TSP3 Case Code ANODE (+) END VIEW L KEMET 2 Component Stack Dimensions Case Code SIDE VIEW H H2 P 3.1 ± 0.38 (.124 ± .015) 4.8 ± 0.38 (.192 ± .015) 0.76 ± 0.38 (.030 ± .015) 1.9 ± 0.38 (.075 ± .015) H2 H P W2 P W2 TSM6 TSP6 TSM6 TSP6 SIDE VIEW ANODE (+) END VIEW L W ANODE (+) END VIEW SIDE VIEW ANODE (+) END VIEW W L W KEMET 6 Component Stack Dimensions L W H 4.1 ± 0.38 (.162 ± .015) 8.0 ± 0.38 (.315 ± .015) 6.1 ±H 0.2 (.242 ± .008) 8.9 ± 0.2 (.350 ± H .008) 6.3 ± 0.38 (.248 ± .015) 9.2 ± 0.38 (365 ± .015) W2 H2 P 5.3 ± 0.2 5.3 ± 0.38 (.210 ± .015) 7.7 ± 0.38 (.304 ± .015) 0.76 ± 0.38 (.030 ± .015) 1.9 ± 0.38 (.075 ± .015) H2(.210 ± .008) 7.4 ± 0.2 (.292 ± .008) H W2 P W P © KEMETPElectronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com 2 H2 H H2 H2 H2 W2 T2029_TSPW• 9/3/2015 2 4 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Capacitance and Rated Voltage Chart Capacitance µF Code 66 666 94 946 Rated Voltage 3 4 6.3 10 16 2B 2D 99 996 3B 132 137 4B 136 137 141 147 3D 188 197 4D 198 207 200 207 204 207 3B 272 277 4B 2B 6B 2B 2D 282 287 300 307 3B 2D 400 407 4B 4D 408 407 440 447 450 457 3B 600 607 4B 660 667 2D 880 887 900 907 940 947 990 997 3D 1320 138 4D 1360 148 1410 148 3D 1880 198 4D 1980 208 2040 208 3D 4D 2720 278 2820 288 4080 418 6D 6B 2D 2D 6B 2D 4D 3D 4D 6B 6D 2D 6D 2D 6D 6D 6D © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 5 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Table 1A – TSP2 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105ºC µF KEMET/EIA 4 6.3 10 3 3 4 4 6.3 10 10 10 16 200 130 66 660 1400 440 940 660 200 300 440 94 2B 2B 2B 2D 2D 2D 2D 2D 2D 2D 2D 2D KEMET Part Number DC Leakage DF Standard ESR Low ESR (See below for part options) TSP2B207M004AH(1)(2)D540 TSP2B137M006AH(1)(2)D540 TSP2B666M010AH(1)(2)D540 TSP2D667M003AH(1)(2)D540 TSP2D148M003AH(1)(2)D540 TSP2D447M004AH(1)(2)D540 TSP2D947M004AH(1)(2)D540 TSP2D667M006AH(1)(2)D540 TSP2D207M010AH(1)(2)D540 TSP2D307M010AH(1)(2)D540 TSP2D447M010AH(1)(2)D540 TSP2D946M016AH(1)(2)D540 µA @ +25ºC Max/5 Min 80 86 66 198 408 176 376 416 200 300 440 152 % @ +25ºC 120 Hz Max 8 8 8 10 10 10 10 10 10 10 10 10 mΩ @ +25ºC 100 kHz Max 40 40 40 13 13 13 20 20 28 28 13 33 mΩ @ +25ºC 100 kHz Max N/A N/A N/A N/A N/A N/A 13 13 13 13 N/A 18 KEMET Part Number DC Leakage DF Standard ESR Low ESR (See below for part options) TSP3B457M003AH(1)(2)D540 TSP3B307M004AH(1)(2)D540 TSP3B207M006AH(1)(2)D540 TSP3B996M010AH(1)(2)D540 TSP3D208M003AH(1)(2)D540 TSP3D148M004AH(1)(2)D540 TSP3D997M006AH(1)(2)D540 TSP3D667M010AH(1)(2)D540 TSP3D147M016AH(1)(2)D540 µA @ +25ºC Max/5 Min 135 120 129 99 612 564 624 660 226 % @ +25ºC 120 Hz Max 8 8 8 8 10 10 10 10 10 mΩ @ +25ºC 100 kHz Max 27 27 27 27 9 14 14 9 22 mΩ @ +25ºC 100 kHz Max N/A N/A N/A N/A N/A 9 9 N/A 12 Maximum Operating Temp ºC 125 125 125 125 125 125 125 125 125 125 125 125 Table 1B – TSP3 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105ºC µF KEMET/EIA 3 4 6.3 10 3 4 6.3 10 16 450 300 200 99 2000 1400 990 660 140 3B 3B 3B 3B 3D 3D 3D 3D 3D Maximum Operating Temp ºC 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 6 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Table 1C – TSP4 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105ºC µF KEMET/EIA 3 4 6.3 10 3 4 4 6.3 10 10 16 600 400 270 130 2700 880 1900 1300 400 880 190 4B 4B 4B 4B 4D 4D 4D 4D 4D 4D 4D KEMET Part Number DC Leakage DF Standard ESR Low ESR (See below for part options) TSP4B607M003AH(1)(2)D540 TSP4B407M004AH(1)(2)D540 TSP4B277M006AH(1)(2)D540 TSP4B137M010AH(1)(2)D540 TSP4D278M003AH(1)(2)D540 TSP4D887M004AH(1)(2)D540 TSP4D198M004AH(1)(2)D540 TSP4D138M006AH(1)(2)D540 TSP4D407M010AH(1)(2)D540 TSP4D887M010AH(1)(2)D540 TSP4D197M016AH(1)(2)D540 µA @ +25ºC Max/5 Min 180 160 172 132 816 352 752 832 400 880 301 % @ +25ºC 120 Hz Max 8 8 8 8 10 10 10 10 10 10 10 mΩ @ +25ºC 100 kHz Max 20 20 20 20 7 7 10 10 14 7 17 mΩ @ +25ºC 100 kHz Max N/A N/A N/A N/A N/A N/A 7 7 7 N/A 9 KEMET Part Number DC Leakage DF Standard ESR Low ESR (See below for part options) TSP6B907M003AH(1)(2)D540 TSP6B607M004AH(1)(2)D540 TSP6B407M006AH(1)(2)D540 TSP6B207M010AH(1)(2)D540 TSP6D418M003AH(1)(2)D540 TSP6D288M004AH(1)(2)D540 TSP6D208M006AH(1)(2)D540 TSP6D907M010AH(1)(2)D540 TSP6D138M010AH(1)(2)D540 TSP6D287M016AH(1)(2)D540 µA @ +25ºC Max/5 Min 270 240 258 198 1224 1128 1248 900 1320 452 % @ +25ºC 120 Hz Max 8 8 8 8 10 10 10 10 10 10 mΩ @ +25ºC 100 kHz Max 14 14 14 14 5 7 7 10 5 11 mΩ @ +25ºC 100 kHz Max N/A N/A N/A N/A N/A 5 5 5 N/A 6 Maximum Operating Temp ºC 125 125 125 125 125 125 125 125 125 125 125 Table 1D – TSP6 Ratings & Part Number Reference Rated Voltage Rated Case Code/ Capacitance Case Size VDC @ 105ºC µF KEMET/EIA 3 4 6.3 10 3 4 6.3 10 10 16 900 600 400 200 4100 2800 2000 900 1300 280 6B 6B 6B 6B 6D 6D 6D 6D 6D 6D Maximum Operating Temp ºC 125 125 125 125 125 125 125 125 125 125 (1) To complete KEMET part number, insert 65 = None, 66 = 10 cycles +25°C, 67 = 10 cycles -55°C +85°C. Designates surge current option. (2) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 7 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Voltage Rating Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) -55°C to 105°C 10 V ≤ VR 90% of VR VR VR > 10 80% of VR VR VR = Rated Voltage % Rated Voltage Derating Guidelines 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% -55 Maximum Transient Voltage Recommended Application Voltage Vr ≤ 10V Recommended Application Voltage V r > 10V 67% 60% 53% 25 45 85 Temperature (°C) 105 125 Reverse Voltage Solid electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 85°C 125°C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 8 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Table 2 – Land Dimensions/Courtyard KEMET Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case L W S V1 V2 L W S V1 V2 L W S V1 V2 TSP2B 2.34 2.54 1.41 7.10 4.30 1.94 2.42 1.61 6.00 3.80 1.56 2.32 1.77 5.14 3.54 TSP2D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP3B 2.34 2.54 1.41 7.10 4.30 1.94 2.42 1.61 6.00 3.80 1.56 2.32 1.77 5.14 3.54 TSP3D 3.48 3.24 3.03 11.00 5.60 3.08 3.12 3.23 9.90 5.10 2.70 3.02 3.39 9.04 4.84 TSP4B 2.34 5.54 1.41 7.10 7.30 1.94 5.42 1.61 6.00 6.80 1.56 5.32 1.77 5.14 6.54 TSP4D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 TSP6B 2.34 5.54 1.41 7.10 7.30 1.94 5.42 1.61 6.00 6.80 1.56 5.32 1.77 5.14 6.54 TSP6D 3.48 7.64 3.03 11.00 10.10 3.08 7.52 3.23 9.90 9.60 2.70 7.42 3.39 9.04 9.34 Density Level A: For low-density Product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). ¹ Height of these chips may create problems in wave soldering. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 9 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Soldering Process KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds 3°C/seconds maximum Ramp-up Rate (TL to TP) 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** Peak Temperature (TP) Time within 5°C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 20 seconds maximum 30 seconds maximum 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. Profile Feature tP Maximum Ramp Up Rate = 3ºC/seconds Maximum Ramp Down Rate = 6ºC/seconds tL Tsmax Tsmin 25 tS 25ºC to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 10 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Construction Detailed Cross Section Silver Paint (Fourth Layer) Wire Polarity Stripe (+) Molded Epoxy Case Leadframe (- Cathode) BeCu Alloy 190 Polarity Bevel (+) Lead Termination (- Cathode) Polymer Carbon (Third Layer) (Second Layer) Weld (to attach wire) High Temperature Solder Wire Ta2O5 Dielectric (First Layer) High Temperature Solder Silver Adhesive Molded Epoxy Case Tantalum Leadframe (+ Anode) BeCu Alloy 190 Lead Termination (+ Anode) Solder Coated Alloy 752 Capacitor Marking Date Code * KEMET High Temperature Polymer Polarity Indicator (+) 1st digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Picofarad Code KEMET ID Rated Voltage Date Code* * 230 = 30th week of 2012 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 11 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 12 KEMET Organic Capacitor (KO-CAP®) – Industrial Tantalum Stack Polymer (TSP) Electrolytic Stack, 3 – 16 VDC Disclaimer Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2029_TSP • 9/3/2015 13