Product Data Sheets C.87/8 Series C.87/0 Series 39 C.87/8 TYPICAL APPLICATIONS: the capacitor is used in series to the start-winding of the single-phase electric motor, allowing its starting and increasing the torque during work. Main application fields: low power electric motors compressors. The choice of capacitor depends on expected life length and the mechanical connection of the user. PRODUCT MARKING : TYPE A (STANDARD) EXAMPLE C.87.8AF1 MKP 6 µF ± 5 % ARCOTRONICS 420V~ 30000h/CLASS A 470V~ 10000h/CLASS B -25/85/21 P2 6 50000 40000 F=50Hz Expected Life (hours) 60000 30000 20000 10000 0 400 410 420 430 440 450 460 470 A .C . V o lta g e GENERAL DATA SIZES TABLES FAST-ON BIPOLAR CABLE DRAWINGS 41 42 46 48 57 40 C.87/8 General technical data Reference standards IEC 252: 1993 EN 60252: 1994 CEI EN 60252: 1994 Approval EN 60 252 VDE Testing and Certification Institute Approved up 500 Vac (diameter ≥ 30 mm) UL810 Recognised Component Mark Standard Marking: 450 Vac 60 Hz. –25/+70 °C. Please contact us for other kind of marking CSA CAN/CSA – C22.2 n.14-95 600V – Diameters 50 – 55 – 60 mm CSA Std. C22.2 No 190 - M1985 240V – Diameters 30 – 35 – 40 – 45 mm Type of working: Continuous Operating class: CLASS B – 10.000 hours, 470 Volt a.c. CLASS A – 30.000 hours, 420 Volt a.c. Operating Min. / Max. Temperature: - 25 / 85 °C Rated Voltage Vn (a.c.): 500 Volt a.c. Rated Frequency (Hz) 50 - 60 Hz Voltage rise/fall time (max): 20 Volt / µs Maximum Permissible Voltage: 1.10 x Rated Voltage Maximum Permissible Current: 1.30 x Rated Current Dissipation factor, Tgδ: 20 x 10 -4 at 20°C, 50 Hz Safety class: P2 Maximum altitude: 2000 m Capacitance Tolerance (standard): ± 5 % Mounting: Any position Case: Aluminium Disk: Thermoplastic Polymer V0 (UL94) Filling Resin: Polyurethane Dielectric: Polypropylene Plates: Self-healing metal layer Voltage Test terminal to terminal: 2 Vn for 2 s Voltage Test terminal to case 2.000 Volt for 2 s Leakage – Clearance in air between parts under voltage: ≥ 5mm Leakage – Clearance in air between parts under voltage and accessible metal parts: ≥ 6mm Vibration test: IEC 68-2-6 Max Tightening torque: 5 Nm (M8) – 10 Nm (M12) 41 C.87/8 Diameter Height Rated Cap. Rated Current Max dv/dt µF A V / µS mm mm 1.0 0.15 20 30 1.5 0.22 20 2.0 0.29 2.5 Pack. FAST-ON Diameter Height Pack. BIPOLAR CABLE Element weight FAST-ON pcs mm mm pcs g 48 115 30 70 36 36 30 48 115 30 70 36 36 20 30 48 115 30 70 36 36 0.37 20 30 48 115 30 70 36 36 3.0 0.44 20 30 48 115 30 70 36 36 3.15 0.47 20 30 48 115 30 70 36 36 3.5 0.52 20 35 48 86 35 70 36 49 4.0 0.59 20 35 48 86 35 70 36 49 4.5 0.66 20 35 48 86 35 70 36 49 5.0 0.74 20 35 48 86 35 70 36 49 6.0 0.88 20 30 78 115 30 100 36 58 7.0 1.03 20 30 78 115 30 100 36 58 8.0 1.18 20 30 78 115 30 100 36 58 10.0 1.47 20 35 78 86 35 100 36 79 12.0 1.77 20 35 78 86 35 100 36 79 12.5 1.84 20 35 78 86 35 100 36 79 14.0 2.07 20 40 78 62 40 100 25 103 16.0 2.36 20 40 78 62 40 100 25 103 18.0 2.66 20 45 78 50 45 100 25 130 20.0 2.95 20 45 78 50 45 100 25 130 22.0 3.25 20 45 78 50 45 100 25 130 25.0 3.69 20 45 98 50 45 120 25 165 30.0 4.43 20 45 98 50 45 120 25 165 31.5 4.65 20 45 133 50 45 120 25 165 35.0 5.16 20 45 133 50 45 155 25 222 40.0 5.90 20 45 133 50 45 155 25 222 45.0 6.64 20 50 133 40 50 155 16 274 50.0 ⊗ 7.38 20 50 133 40 50 155 16 274 55.0 ⊗ 8.12 20 50 133 40 50 155 16 274 60.0 ⊗ 8.85 20 50 133 40 50 155 16 274 ⊗ Capacitor produced according EN60252 standard with Arcotronics self-certification 42 C.87/0 TYPICAL APPLICATION: the capacitor is used in series to the start-winding of the single-phase electric motor, allowing its starting and increasing the torque during work. Main application fields: low power electric motors, compressors. The choice of the capacitor depends on expected life length and the mechanical connection of the user. PRODUCT MARKING: TYPE C - EXAMPLE C.87.0CF1 MKP 5 µF ± 5 % ARCOTRONICS 420V~ 10000h/CLASS B 470V~ 3000h/CLASS C -25/85/21 P2 5 18000 Expected life hours F = 50 Hz 16000 14000 12000 10000 8000 6000 4000 2000 0 400 410 420 430 440 450 460 470 A.C. V oltage GENERAL DATA SIZES TABLES FAST-ON BIPOLAR CABLE DRAWINGS 44 45 46 48 57 43 C.87/0 General technical data: Reference standards IEC 252: 1993 EN 60252: 1994 EN60252 approval VDE Testing and Certification Institute Approved up 500 Vac (diameter ≥ 30 mm) UL810 Recognised Component Mark Standard Marking: 250 Vac 60 Hz. –25/+70 °C. Please contact us for other kind of marking Great Wall Approval (China) Approved CSA CAN/CSA – C22.2 n.14-95 Vac max 600V – Diameters 50 – 55 - 60 mm CSA Std. C22.2 No 190 - M1985 Vac max 240V – Diameters 30 – 35 – 40 – 45 mm CLASS B - 10.000 H , 420 Volt a.c. Operating class: CLASS C - 3.000 H , 470 Volt a.c. Type of working: Continuous Operating Min. / Max Temperature: - 25 / 85 °C Storage: - 40 / 90 °C Rated Voltage Vn (a.c.): 500 Volt a.c. Rated Frequency (Hz) 50 - 60 Hz Voltage rise/fall time (max): 15 Volt / µs Maximum Permissible Voltage: 1.10 x Rated Voltage Maximum Permissible Current: 1.30 x Rated Current Dissipation factor Tgδ: 20 x 10 -4 at 20°C, 50 Hz Safety class: P2 Maximum altitude: 2000 m Capacitance tolerance (standard): ± 5 % Mounting: Any position Case: Aluminium Disk: Thermoplastic polymer V2 (UL94) Filling resin: Polyurethane Dielectric: Polypropylene Plates: Self-healing metal layer Voltage Test Terminal to terminal: 2 Vn for 2 s Voltage Test Terminal to case: 2000 Volt for 2 s Leakage – Clearance in air between parts under voltage: ≥ 5mm Leakage – Clearance in air between parts under voltage and accessible metal parts: ≥ 6mm Max Tightening torque: 5 Nm (M8) – 10 Nm (M12) 44 C.87/0 Diameter Height Pack. Diameter Height Pack. Rated Cap. Rated Current Max dv/dt µF A V/µs mm mm pcs mm mm pcs g 1.0 0.15 15 30 48 115 30 70 36 36 1.5 0.22 15 30 48 115 30 70 36 36 2.0 0.29 15 30 48 115 30 70 36 36 2.5 0.37 15 30 48 115 30 70 36 36 3.0 0.44 15 30 48 115 30 70 36 36 3,15 0.47 15 30 48 115 30 70 36 36 3.5 0.52 15 30 48 115 30 70 36 36 4.0 0.59 15 30 48 115 30 70 36 36 4.5 0.66 15 30 48 115 30 70 36 36 5.0 0.74 15 35 48 86 35 70 36 49 6.0 0.88 15 35 48 86 35 70 36 49 7.0 1.03 15 35 48 86 35 70 36 49 8.0 1.18 15 30 78 115 30 100 36 58 10.0 1.47 15 30 78 115 30 100 36 58 12.0 1.77 15 35 78 86 35 100 36 79 12.5 1.84 15 35 78 86 35 100 36 79 14.0 2.07 15 35 78 86 35 100 36 79 16.0 2.36 15 35 78 86 35 100 36 79 18.0 2.66 15 40 78 62 40 100 25 103 20.0 2.95 15 40 78 62 40 100 25 103 22.0 3.25 15 40 78 62 40 100 25 103 25.0 3.69 15 45 78 50 45 100 25 130 30.0 4.43 15 45 78 50 45 100 25 130 31.5 4.65 15 45 98 50 45 100 25 165 35.0 5.16 15 45 98 50 45 120 25 165 40.0 5.90 15 45 98 50 45 120 25 165 45.0 6.64 15 45 133 50 45 155 25 222 50.0 7.38 15 50 133 40 50 155 16 274 55.0 8.12 15 50 133 40 50 155 16 274 60.0 8.85 15 50 133 40 50 155 16 274 65.0 9.60 15 55 133 32 55 155 16 332 70.0 10.30 15 55 133 32 55 155 16 332 75.0 11.00 15 60 133 28 60 155 16 395 80.0 11.80 15 60 133 28 60 155 16 395 FAST-ON BIPOLAR CABLE 45 Weight C.87 Mechanical Solutions C.87. SERIES Fast-on 2.8mm with Hole TYPE OF T ERMINAL Execution: Protection degree Wire material Length Thickness Diameter hole Standard Bolt M8 Bolt M12 FAST-ON 2.8 WITH HOLE Standard IP00 Steel tinned by electrolysis 2.8 mm 0.8 mm 1.3 DIN46244 To diameter (φ) 45mm included Over diameter (φ) 45mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm C C 8 8 7 7 - - F G 1 1 - - - - A A A A - - Basic execution C 8 7 - - E 1 - - - - A A - - C.87. SERIES Fast-on 2.8 mm with Slot TYPE OF T ERMINAL Execution: Protection degree Wire material Length Thickness Slot a x b Standard Bolt M8 Bolt M12 FAST ON 2.8 WITH SLOT (SOLDERING TERMINAL) On request IP00 Steel tinned by electrolysis 2.8 mm 0.8 mm 2.8 x 1.7 DIN46244 To diameter (φ) 45mm included Over diameter (φ) 45mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm C C 8 8 7 7 - - F G 4 4 - - - - A A A A - - Basic execution C 8 7 - - E 4 - - - - A A - - 46 C.87 Mechanical Solutions C.87. SERIES Single Fast-on 6.3 mm TYPE OF T ERMINAL Execution: Protection degree Wire material Terminal Length Thickness Standard Bolt M8 Bolt M12 FAST-ON 6.3 (SINGLE) Standard IP00 Steel tinned by electricity Fast-on 6.3 mm 0.8 mm DIN46244 To diameter (φ) 45mm included Over diameter (φ) 45mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm C C 8 8 7 7 - - F G 2 2 - - - - A A A A - - Basic execution C 8 7 - - E 2 - - - - A A - - C.87. SERIES Double Fast-on 6.3 mm TYPE OF T ERMINAL Execution: Protection degree Wire material Terminal Length Thickness Standard Bolt M8 Bolt M12 FAST ON 6.3 (DOUBLE) Standard IP00 Steel tinned by electricity Fast on 6.3 mm 0.8 mm DIN46244 To diameter (φ) 45mm included Over diameter (φ) 45mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm C C 8 8 7 7 - - F G 3 3 - - - - A A A A - - Basic execution C 8 7 - - E 3 - - - - A A - - 47 C.87 Mechanical Solutions C.87. SERIES Bipolar Cable Standard TYPE Execution: Protection degree Cable Designation Standard Operating temperature Conductor Insulating Sleeve Conductor colour Cable unsheathing Cable stripping Finishing Bolt M8 (F) Bolt M12 (G) FLEXIBLE BIPOLAR CABLE FOR HIGH T EMPERATURE Standard IP55 PVC (Polyvinyl chloride) H05V2V2-F CEI 20 – 20 90 °C Flexible soft copper wire Polyvinyl chloride TI3 Polyvinyl chloride TM3 Blue / Brown 40 mm 8 mm Tinning To diameter (φ) 45mm included Over diameter (φ) 45mm Metal bolt execution Total length L = 150 mm L = 150 mm L = 250 mm L = 300 mm L = 350 mm L = 400 mm C No metal bolt execution Total length L = 150 mm L = 150 mm L = 250 mm L = 300 mm L = 350 mm L = 400 mm C 8 7 - - F/G F/G F/G F/G F/G F/G F/G 8 7 - - - - - F F F F F F E E E E E E E 48 - L L L L L L F F F F F F - - - - - D E F G H I L L L L L L - D E F G H I C.87 Mechanical Solutions Special Executions. For applications requiring a specific termination, KEMET can supply a full range of capacitors with a bipolar cable provided with terminals. The material used (Brass – Cu Zn) provided with tinning (Gal Sn) defines connection quality and reliability also in case of high temperatures (155°C). C.87. SERIES Bipolar Cable Pin Terminals TYPE Execution: Point material Material thickness Terminal length Standard version S = 300mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm Basic execution BIPOLAR CABLE WITH PIN TERMINAL Special Cu Zn gal Sn 0.25 mm 7 mm C C C 8 8 8 7 7 7 - - F G E J J J - - - - - - - - C.87. SERIES Bipolar Cable Straight Fast-on 6.3 mm TYPE Execution: Fast – on material Material thickness Terminal length Standard version S = 300mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm Basic execution BIPOLAR CABLE WITH STRAIGHT FAST-ON 6.3 Special Cu Zn gal Sn 0.42 mm 19.3 mm C C C 8 8 8 7 7 7 49 - - F G E H H H - - - - - - - - C.87 Mechanical Solutions C.87. SERIES Bipolar Cable Straight Female Fast-on 4.8 mm TYPE Execution: Fast-on material Material thickness Terminal length Standard version S = 300mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm Basic execution BIPOLAR CABLE WITH STRAIGHT FEMALE FAST-ON 4.8 Special Cu Zn gal Sn 0.35 mm 15.6 mm C C C 8 8 8 7 7 7 - - F G E G G G - - - - - - - - - - - - - C.87. SERIES Bipolar Cable Flag Female Fast-on 4.8 mm TYPE Execution: Fast-on material Material thickness Terminal length Standard version S = 300mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm Basic execution BIPOLAR CABLE WITH FEMALE FLAG FAST-ON 4.8 Special Cu Zn gal Sn 0.35 mm 12.5 mm C C C 8 8 8 7 7 7 50 - - F G E L L L - - - C.87 Mechanical Solutions C.87. SERIES Bipolar Cable Ring Terminal M4 TYPE Execution: Terminal material Material thickness Ring diameter Standard version S = 300mm Metal bolt execution (φ) ≤ 45mm Metal bolt execution (φ) > 45mm Basic execution BIPOLAR CABLE WITH RING TERMINAL M 4 Special Cu Zn gal Sn 0.40 mm 4 mm C C C 8 8 8 7 7 7 51 - - F G E I I I - - - - A A A A A A - - C.87 Mechanical Solutions C.87 SERIES – OPTIONS Rated Cap. C.87/8 Standard dimensions C.87/0 Options Standard dimensions Options µF DxH mm Package pcs DxH mm Package pcs DxH mm Package pcs DxH mm Package pcs 1.0 1.5 2.0 2.5 3.0 3.15 3.5 4.0 4.5 5.0 6.0 7.0 8.0 10.0 12.0 12.5 14.0 16.0 18.0 20.0 22.0 25.0 30.0 31.5 35.0 36.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 80.0 30x48 30x48 30x48 30x48 30x48 30x48 35x48 35x48 35x48 35x48 30x78 30x78 30x78 35x78 35x78 35x78 40x78 40x78 45x78 45x78 45x78 45x98 45x98 45x133 45x133 45x133 45x133 50x133 50x133 50x133 50x133 115 115 115 115 115 115 86 86 86 86 115 115 115 86 86 86 62 62 50 50 50 50 50 50 50 50 50 40 40 40 40 25x48 25x48 25x48 25x48 25x48 162 162 162 162 162 162 162 162 162 162 115 115 115 115 86 86 86 25x60 25x60 25x78 25x78 25x78 30x78 35x60 35x60 162 162 162 162 162 115 86 86 35x98 35x98 40x98 40x98 40x98 86 86 62 62 62 115 115 115 115 115 115 115 115 115 86 86 86 115 115 86 86 86 86 62 62 62 50 50 50 50 50 50 50 40 40 40 32 32 28 28 25x48 25x48 25x48 25x48 25x60 30x60 30x60 30x60 30x60 35x60 35x60 35x60 30x48 30x48 30x48 30x48 30x48 30x48 30x48 30x48 30x48 35x48 35x48 35x48 30x78 30x78 35x78 35x78 35x78 35x78 40x78 40x78 40x78 45x78 45x78 45x98 45x98 45x98 45x98 45x133 50x133 50x133 50x133 55x133 55x133 60x133 60x133 40x98 40x98 62 62 55x98 60x98 60x98 60x98 32 28 28 28 50x98 50x98 55x98 60x98 60x98 60x98 40 40 40 32 28 28 28 52