T429 Series MIL–PRF–55365/11 (CWR29 Style)

Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Overview
The KEMET T429 Series is approved to MIL–PRF–55365/11
(CWR29 Style) with Weibull failure rates of B level (0.1% failures
per 1,000 hours), C level (0.01% failures per 1,000 hours), D
level (0.001% failures per 1,000 hours), or T level (0.01% failures
per 1,000 hours, Option C surge current, DPA, Radiographic
inspection, 100% visual inspection, DCL and ESR measurements
within +3 standard deviations, and Group C inspection). This
CWR29 product is a precision-molded device with compliant
terminations and indelible laser marking. Tape and reeling per EIA
481 is standard.
Benefits
•
•
•
•
•
•
•
•
•
•
•
Established reliability options
Taped and reeled per EIA 481
Symmetrical, compliant terminations
Laser-marked case
100% surge current test available on all case sizes
Qualified to MIL–PRF–55365/11 (CWR29 Style)
Termination options B, C, H, K
Weibull failure options B, C, D, and T
Exponential failure rates M, P, R, S
Voltage rating of 4 – 50 VDC
Operating temperature range of -55˚C to +125˚C
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Applications
Typical applications include decoupling and filtering in military and aerospace applications requiring CWR29 devices.
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder.
SPICE
For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software.
The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over
frequency, temperature, ripple, and DC bias conditions.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
1
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
KEMET Ordering Information
T
Capacitor
Class
T=
Tantalum
429
A
225
Series
Case
Size
Capacitance
Code (pF)
A, B,
C, D,
E, F,
G, H,
X
First two digits
represent
significant
figures. Third
digit specifies
number of
zeros.
CWR29
Established
Reliability
K
004
J = ±5%
K = ±10%
M = ±20%
004 = 4
006 = 6.3
010 = 10
015 = 15
020 = 20
025 = 25
035 = 35
050 = 50
H
A
Capacitance Rated Voltage
Tolerance
(VDC)
4251
7280
Packaging
(C-Spec)
Failure Rate/Design
Termination Finish
Surge
Weibull
A = non-ER
B = (0.1%/1,000 hours)
C = (0.01%/1,000 hours)
D =(0.001%/1,000 hours)
T = (0.01%/1,000 hours)
Exponential
M = (1.0%/1,000 hours)
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
C = Hot Solder
Dipped
H = Standard
Solder Coated
(SnPb 5% Pb
minimum)
B = Gold Plated
K = Solder
Fused
Blank = No surge
4250= 25ºC after
Weibull
4251 = -55ºC and
85ºC after Weibull
4252 = -55ºC
and 85ºC before
Weibull TLVL= Weibull
Grade Level "T"
Blank = 7"
Reel
7280 = 13"
Reel
7610 = Bag
7005 =
Moisture
bags
Ordering Information – Defense MIL–PRF–55365/11
CWR29
Capacitor Style
Per MIL–PRF–
55365/11
K
H
Rated Voltage
Termination Finish
(VDC)
C=4
D=6
F = 10
H = 15
J = 20
K = 25
M = 35
N = 50
B = Gold Plated
C = Hot solder
dipped
H = Solder Plated
K = Solder fused
225
K
C
D
A
Capacitance Code
(pF)
Capacitance
Tolerance
Reliability Level
Case Code
Surge Current Option
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
J = ±5%
K = ±10%
M = ±20%
Weibull
A, B, C,
A = non-ER
D, E, F, G,
B = (0.1%/1,000 hours)
H, X
C = (0.01%/1,000 hours)
D =(0.001%/1,000 hours)
T = T Level* (0.01%/1,000
hours)
Exponential
M = (1.0%/1,000 hours)
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
A = +25°C after
Weibull
B = -55°C +85°C after
Weibull
C = -55°C +85°C
before Weibull
Z = None
* When T Level is ordered, no Surge Current Option is needed
Performance Characteristics
Item
Performance Characteristics
Operating Temperature
Rated Capacitance Range
Capacitance Tolerance
Rated Voltage Range
-55°C to 125°C
0.1 – 330 µF @ 120 Hz/25°C
J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
4 – 50 V
DF (120 Hz)
Refer to Part Number Electrical Specification Table
ESR (100 kHz)
Refer to Part Number Electrical Specification Table
Leakage Current
≤ 0.01 CV (µA) at rated voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
2
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Qualification
Test
Condition
Characteristics
Δ C/C
Endurance
Storage Life
Thermal Shock
Temperature Stability
85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
125°C @ 0 volts, 2,000 hours
MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
Δ C/C
Within ±5% of initial value
DF
Within initial limits
DCL
Within 1.25 x initial limit
ESR
Within initial limits
+25°C
-55°C
+85°C
+125°C
Δ C/C
IL*
±10%
±10%
±15%
DF
IL
IL
1.5 x IL
1.5 x IL
DCL
IL
n/a
10 x IL
12 x IL
Δ C/C
Surge Voltage
Mechanical Shock/Vibration
Additional qualification tests
per MIL–PRF–55365/11
Within ±10% of initial value
25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
MIL–STD–202, Method 213, Condition I, 100 G Peak
MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Within ±5% of initial value
DF
Within initial limits
DCL
Within initial limits
ESR
Within initial limits
Δ C/C
Within ±10% of initial value
DF
Within initial limits
DCL
Within initial limits
Please contact KEMET for more information.
*IL = Initial limit
Certification
MIL–PRF–55365/11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
3
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Electrical Characteristics
ESR vs. Frequency
Capacitance vs. Frequency
1000
100
T429C475/015
T429F336/015
T429F336/015_IMP
T429H107/015_IMP
T429C475/015_ESR
Capacitance (µF)
Impedance, ESR (Ohms)
T429H107/015
T429C475/015_IMP
100
T429F336/015_ESR
10
T429H107/015_ESR
1
10
1
0.1
0.01
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
0.1
10,000,000
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
Dimensions – Millimeters (Inches)
Metric will govern
SIDE VIEW
END VIEW
L
Termination cutout
at KEMET's option,
either end
H
P
W
H2
BOTTOM VIEW
Solderable
Surfaces
½ H2 Min.
W2
P
Case Size
Component
KEMET
L ±0.38 (0.015)
W ±0.38 (0.015)
H ±0.38 (0.015)
P +0.25 (0.010),
-0.13 (0.005)
A
2.54 (0.100)
1.27 (0.050)
1.27 (0.050)
0.76 (0.030)
B
3.81 (0.150)
1.27 (0.050)
1.27 (0.050)
0.76 (0.030)
C
5.08 (0.200)
1.27 (0.050)
1.27 (0.050)
0.76 (0.030)
D
3.81 (0.150)
2.54 (0.100)
1.27 (0.050)
0.76 (0.030)
E
5.08 (0.200)
2.54 (0.100)
1.27 (0.050)
0.76 (0.030)
F
5.59 (0.220)
3.43 (0.135)
1.78 (0.070)
0.76 (0.030)
G
6.73 (0.265)
2.79 (0.110)
2.79 (0.110)
1.27 (0.050)
H
7.24 (0.285)
3.81 (0.150)
2.79 (0.110)
1.27 (0.050)
X
6.93 (0.273)
5.41 (0.213)
2.74 (0.108)
1.19 (0.047)
W2
H2 Minimum
1.27 ±0.13
(0.050 ±0.005)
1.27 ±0.13
(0.050 ±0.005)
1.27 ±0.13
(0.050 ±0.005)
2.41 +0.13, -0.25
(0.095 +0.005, -0.010)
2.41 +0.13, -0.25
(0.095 +0.005, -0.010)
3.30 ±0.13
(0.130 ±0.005)
2.67 ±0.13
(0.105 ±0.005)
3.68 +0.013, -0.51
(0.145 +0.005, -0.020)
3.05 ±0.13
(0.120 ±0.005)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
0.76 (0.030)
1.02 (0.040)
1.52 (0.060)
1.52 (0.060)
1.22 (0.048)
Note: When option C is selected for lead material, add an additional 0.38mm (0.015 inch) to the above tolerances for "L", "W", "H", "P", "W2" and "H2"
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
4
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Table 1 – Ratings & Part Number Reference
Rated Rated Case Code/
Voltage Cap
Case Size
KEMET Part
Number
MIL–PRF–55365/11
DC
Part Number
Leakage
A/1005
A/1005
A/1005
B/1505
A/1005
C/2005
B/1505
D/1510
B/1505
E/2010
B/1505
D/1510
D/1510
E/2010
F/2214
E/2010
E/2010
G/2711
F/2214
H/2915
G/2711
H/2915
H/2915
A/1005
A/1005
B/1505
A/1005
C/2005
B/1505
D/1510
B/1505
E/2010
B/1505
D/1510
E/2010
D/1510
E/2010
F/2214
E/2010
F/2214
G/2711
F/2214
G/2711
H/2915
G/2711
G/2711
(See below for
part options)
T429A225(1)004(2)(3)(4)
T429A335(1)004(2)(3)(4)
T429A475(1)004(2)(3)(4)
T429B475(1)004(2)(3)(4)
T429A685(1)004(2)(3)(4)
T429C685(1)004(2)(3)(4)
T429B106(1)004(2)(3)(4)
T429D106(1)004(2)(3)(4)
T429B156(1)004(2)(3)(4)
T429E156(1)004(2)(3)(4)
T429B226(1)004(2)(3)(4)
T429D226(1)004(2)(3)(4)
T429D336(1)004(2)(3)(4)
T429E336(1)004(2)(3)(4)
T429F336(1)004(2)(3)(4)
T429E476(1)004(2)(3)(4)
T429E686(1)004(2)(3)(4)
T429G686(1)004(2)(3)(4)
T429F107(1)004(2)(3)(4)
T429H107(1)004(2)(3)(4)
T429G157(1)004(2)(3)(4)
T429H227(1)004(2)(3)(4)
T429H337(1)004(2)(3)(4)
T429A155(1)006(2)(3)(4)
T429A335(1)006(2)(3)(4)
T429B335(1)006(2)(3)(4)
T429A475(1)006(2)(3)(4)
T429C475(1)006(2)(3)(4)
T429B685(1)006(2)(3)(4)
T429D685(1)006(2)(3)(4)
T429B106(1)006(2)(3)(4)
T429E106(1)006(2)(3)(4)
T429B156(1)006(2)(3)(4)
T429D156(1)006(2)(3)(4)
T429E156(1)006(2)(3)(4)
T429D226(1)006(2)(3)(4)
T429E226(1)006(2)(3)(4)
T429F226(1)006(2)(3)(4)
T429E336(1)006(2)(3)(4)
T429F476(1)006(2)(3)(4)
T429G476(1)006(2)(3)(4)
T429F686(1)006(2)(3)(4)
T429G686(1)006(2)(3)(4)
T429H686(1)006(2)(3)(4)
T429G107(1)006(2)(3)(4)
T429G157(1)006(2)(3)(4)
(See below for
part options)
CWR29C(3)225(1)(2)A(5)
CWR29C(3)335(1)(2)A(5)
CWR29C(3)475(1)(2)A(5)
CWR29C(3)475(1)(2)B(5)
CWR29C(3)685(1)(2)A(5)
CWR29C(3)685(1)(2)C(5)
CWR29C(3)106(1)(2)B(5)
CWR29C(3)106(1)(2)D(5)
CWR29C(3)156(1)(2)B(5)
CWR29C(3)156(1)(2)E(5)
CWR29C(3)226(1)(2)B(5)
CWR29C(3)226(1)(2)D(5)
CWR29C(3)336(1)(2)D(5)
CWR29C(3)336(1)(2)E(5)
CWR29C(3)336(1)(2)F(5)
CWR29C(3)476(1)(2)E(5)
CWR29C(3)686(1)(2)E(5)
CWR29C(3)686(1)(2)G(5)
CWR29C(3)107(1)(2)F(5)
CWR29C(3)107(1)(2)H(5)
CWR29C(3)157(1)(2)H(5)
CWR29C(3)227(1)(2)H(5)
CWR29C(3)337(1)(2)H(5)
CWR29D(3)155(1)(2)A(5)
CWR29D(3)335(1)(2)A(5)
CWR29D(3)335(1)(2)B(5)
CWR29D(3)475(1)(2)A(5)
CWR29D(3)475(1)(2)C(5)
CWR29D(3)685(1)(2)B(5)
CWR29D(3)685(1)(2)D(5)
CWR29D(3)106(1)(2)B(5)
CWR29D(3)106(1)(2)E(5)
CWR29D(3)156(1)(2)B(5)
CWR29D(3)156(1)(2)D(5)
CWR29D(3)156(1)(2)E(5)
CWR29D(3)226(1)(2)D(5)
CWR29D(3)226(1)(2)E(5)
CWR29D(3)226(1)(2)F(5)
CWR29D(3)336(1)(2)E(5)
CWR29D(3)476(1)(2)F(5)
CWR29D(3)476(1)(2)G(5)
CWR29D(3)686(1)(2)F(5)
CWR29D(3)686(1)(2)G(5)
CWR29D(3)686(1)(2)H(5)
CWR29D(3)107(1)(2)G(5)
CWR29D(3)157(1)(2)G(5)
µF
KEMET/EIA
(See below for
part options)
(See below for
part options)
Rated
Cap
Case Code/
Case Size
KEMET Part Number
MIL-PRF-55365/11
Part Number
VDC @ 85ºC
µF
KEMET/EIA
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
2.2
3.3
4.7
4.7
6.8
6.8
10
10
15
15
22
22
33
33
33
47
68
68
100
100
150
220
330
1.5
3.3
3.3
4.7
4.7
6.8
6.8
10
10
15
15
15
22
22
22
33
47
47
68
68
68
100
150
VDC @ 85ºC
Rated
Voltage
Maximum
Operating
Temp
DF
ESR
% @ +20ºC
120 Hz Max
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
6.0
8.0
8.0
6.0
8.0
10.0
10.0
10.0
10.0
10.0
10.0
Ω @ +20ºC
100 kHz Max
4.0
6.0
6.0
3.2
6.0
2.2
3.2
1.3
3.2
1.0
3.2
1.3
1.3
0.9
0.6
0.9
0.9
0.275
0.55
0.18
0.25
0.20
0.18
4.0
6.0
3.2
6.0
2.2
3.2
1.5
3.2
1.0
3.2
1.7
0.9
1.7
1.0
0.6
1.0
1.0
0.275
0.4
0.25
0.18
0.275
0.275
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
µA @ +20ºC % @ +20ºC 120 Ω @ +20ºC
Max/5 Min
Hz Max
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Maximum
Operating Temp
MSL
µA @ +20ºC
Max/5 Min
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
3.0
3.0
4.0
4.0
6.0
8.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
3.0
4.0
4.0
4.0
6.0
10.0
DC
Leakage
DF
ESR
ºC
MSL
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
5
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated Case Code/
Voltage Cap
Case Size
KEMET Part
Number
MIL–PRF–55365/11
DC
Part Number
Leakage
H/2915
H/2915
A/1005
A/1005
B/1505
A/1005
C/2005
B/1505
C/2005
D/1510
B/1505
C/2005
D/1510
E/2010
B/1505
C/2005
D/1510
E/2010
D/1510
E/2010
F/2214
E/2010
F/2214
G/2711
F/2214
G/2711
H/2915
G/2711
G/2711
H/2915
H/2915
X/2824
H/2915
A/1005
A/1005
A/1005
B/1505
A/1005
C/2005
B/1505
D/1510
B/1505
C/2005
D/1510
E/2010
D/1510
(See below for
part options)
T429H227(1)006(2)(3)(4)
T429H337(1)006(2)(3)(4)
T429A105(1)010(2)(3)(4)
T429A225(1)010(2)(3)(4)
T429B225(1)010(2)(3)(4)
T429A335(1)010(2)(3)(4)
T429C335(1)010(2)(3)(4)
T429B475(1)010(2)(3)(4)
T429C475(1)010(2)(3)(4)
T429D475(1)010(2)(3)(4)
T429B685(1)010(2)(3)(4)
T429C685(1)010(2)(3)(4)
T429D685(1)010(2)(3)(4)
T429E685(1)010(2)(3)(4)
T429B106(1)010(2)(3)(4)
T429C106(1)010(2)(3)(4)
T429D106(1)010(2)(3)(4)
T429E106(1)010(2)(3)(4)
T429D156(1)010(2)(3)(4)
T429E156(1)010(2)(3)(4)
T429F156(1)010(2)(3)(4)
T429E226(1)010(2)(3)(4)
T429F336(1)010(2)(3)(4)
T429G336(1)010(2)(3)(4)
T429F476(1)010(2)(3)(4)
T429G476(1)010(2)(3)(4)
T429H476(1)010(2)(3)(4)
T429G686(1)010(2)(3)(4)
T429G107(1)010(2)(3)(4)
T429H107(1)010(2)(3)(4)
T429H157(1)010(2)(3)(4)
T429X157(1)010(2)(3)(4)
T429H227(1)010(2)(3)(4)
T429A684(1)015(2)(3)(4)
T429A105(1)015(2)(3)(4)
T429A155(1)015(2)(3)(4)
T429B155(1)015(2)(3)(4)
T429A225(1)015(2)(3)(4)
T429C225(1)015(2)(3)(4)
T429B335(1)015(2)(3)(4)
T429D335(1)015(2)(3)(4)
T429B475(1)015(2)(3)(4)
T429C475(1)015(2)(3)(4)
T429D475(1)015(2)(3)(4)
T429E475(1)015(2)(3)(4)
T429D685(1)015(2)(3)(4)
(See below for
part options)
CWR29D(3)227(1)(2)H(5)
CWR29D(3)337(1)(2)H(5)
CWR29F(3)105(1)(2)A(5)
CWR29F(3)225(1)(2)A(5)
CWR29F(3)225(1)(2)B(5)
CWR29F(3)335(1)(2)A(5)
CWR29F(3)335(1)(2)C(5)
CWR29F(3)475(1)(2)B(5)
CWR29F(3)475(1)(2)C(5)
CWR29F(3)475(1)(2)D(5)
CWR29F(3)685(1)(2)B(5)
CWR29F(3)685(1)(2)C(5)
CWR29F(3)685(1)(2)D(5)
CWR29F(3)685(1)(2)E(5)
CWR29F(3)106(1)(2)B(5)
CWR29F(3)106(1)(2)C(5)
CWR29F(3)106(1)(2)D(5)
CWR29F(3)106(1)(2)E(5)
CWR29F(3)156(1)(2)D(5)
CWR29F(3)156(1)(2)E(5)
CWR29F(3)156(1)(2)F(5)
CWR29F(3)226(1)(2)E(5)
CWR29F(3)336(1)(2)F(5)
CWR29F(3)336(1)(2)G(5)
CWR29F(3)476(1)(2)F(5)
CWR29F(3)476(1)(2)G(5)
CWR29F(3)476(1)(2)H(5)
CWR29F(3)686(1)(2)G(5)
CWR29F(3)107(1)(2)G(5)
CWR29F(3)107(1)(2)H(5)
CWR29F(3)157(1)(2)H(5)
CWR29F(3)157(1)(2)X(5)
CWR29F(3)227(1)(2)H(5)
CWR29H(3)684(1)(2)A(5)
CWR29H(3)105(1)(2)A(5)
CWR29H(3)155(1)(2)A(5)
CWR29H(3)155(1)(2)B(5)
CWR29H(3)225(1)(2)A(5)
CWR29H(3)225(1)(2)C(5)
CWR29H(3)335(1)(2)B(5)
CWR29H(3)335(1)(2)D(5)
CWR29H(3)475(1)(2)B(5)
CWR29H(3)475(1)(2)C(5)
CWR29H(3)475(1)(2)D(5)
CWR29H(3)475(1)(2)E(5)
CWR29H(3)685(1)(2)D(5)
µF
KEMET/EIA
(See below for
part options)
(See below for
part options)
Rated
Cap
Case Code/
Case Size
KEMET Part Number
MIL-PRF-55365/11
Part Number
VDC @ 85ºC
µF
KEMET/EIA
6
6
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
15
15
15
15
15
15
15
15
15
15
15
15
15
220
330
1
2.2
2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
6.8
6.8
10
10
10
10
15
15
15
22
33
33
47
47
47
68
100
100
150
150
220
0.68
1
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
4.7
6.8
VDC @ 85ºC
Rated
Voltage
Maximum
Operating
Temp
DF
ESR
% @ +20ºC
120 Hz Max
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
8.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω @ +20ºC
100 kHz Max
0.18
0.18
5.0
6.0
3.2
6.0
2.2
3.2
2.2
1.5
3.2
2.2
1.7
1.0
3.2
2.2
1.3
1.0
1.7
0.9
0.7
0.6
0.4
0.275
0.4
0.25
0.18
0.275
0.275
0.18
0.18
0.065
0.18
6.0
7.5
7.5
3.2
7.5
2.2
3.6
1.7
2.0
2.2
2.0
1.2
2.0
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
µA @ +20ºC % @ +20ºC 120 Ω @ +20ºC
Max/5 Min
Hz Max
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Maximum
Operating Temp
MSL
µA @ +20ºC
Max/5 Min
10.0
20.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
3.0
3.0
3.0
4.0
4.0
5.0
6.0
10.0
10.0
15.0
15.0
20.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
DC
Leakage
DF
ESR
ºC
MSL
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
6
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated Case Code/
Voltage Cap
Case Size
KEMET Part
Number
MIL–PRF–55365/11
DC
Part Number
Leakage
E/2010
D/1510
E/2010
F/2214
E/2010
F/2214
F/2214
G/2711
F/2214
G/2711
H/2915
G/2711
H/2915
G/2711
H/2915
H/2915
A/1005
A/1005
B/1505
A/1005
B/1505
B/1505
C/2005
B/1505
D/1510
D/1510
E/2010
E/2010
E/2010
F/2214
E/2010
F/2214
F/2214
G/2711
G/2711
H/2915
H/2915
H/2915
X/2824
A/1005
A/1005
B/1505
B/1505
C/2005
D/1510
D/1510
(See below for
part options)
T429E685(1)015(2)(3)(4)
T429D106(1)015(2)(3)(4)
T429E106(1)015(2)(3)(4)
T429F106(1)015(2)(3)(4)
T429E156(1)015(2)(3)(4)
T429F156(1)015(2)(3)(4)
T429F226(1)015(2)(3)(4)
T429G226(1)015(2)(3)(4)
T429F336(1)015(2)(3)(4)
T429G336(1)015(2)(3)(4)
T429H336(1)015(2)(3)(4)
T429G476(1)015(2)(3)(4)
T429H476(1)015(2)(3)(4)
T429G686(1)015(2)(3)(4)
T429H686(1)015(2)(3)(4)
T429H107(1)015(2)(3)(4)
T429A474(1)020(2)(3)(4)
T429A684(1)020(2)(3)(4)
T429B684(1)020(2)(3)(4)
T429A105(1)020(2)(3)(4)
T429B105(1)020(2)(3)(4)
T429B155(1)020(2)(3)(4)
T429C155(1)020(2)(3)(4)
T429B225(1)020(2)(3)(4)
T429D225(1)020(2)(3)(4)
T429D335(1)020(2)(3)(4)
T429E335(1)020(2)(3)(4)
T429E475(1)020(2)(3)(4)
T429E685(1)020(2)(3)(4)
T429F685(1)020(2)(3)(4)
T429E106(1)020(2)(3)(4)
T429F106(1)020(2)(3)(4)
T429F156(1)020(2)(3)(4)
T429G156(1)020(2)(3)(4)
T429G226(1)020(2)(3)(4)
T429H226(1)020(2)(3)(4)
T429H336(1)020(2)(3)(4)
T429H476(1)020(2)(3)(4)
T429X476(1)020(2)(3)(4)
T429A334(1)025(2)(3)(4)
T429A474(1)025(2)(3)(4)
T429B684(1)025(2)(3)(4)
T429B105(1)025(2)(3)(4)
T429C105(1)025(2)(3)(4)
T429D155(1)025(2)(3)(4)
T429D225(1)025(2)(3)(4)
(See below for
part options)
CWR29H(3)685(1)(2)E(5)
CWR29H(3)106(1)(2)D(5)
CWR29H(3)106(1)(2)E(5)
CWR29H(3)106(1)(2)F(5)
CWR29H(3)156(1)(2)E(5)
CWR29H(3)156(1)(2)F(5)
CWR29H(3)226(1)(2)F(5)
CWR29H(3)226(1)(2)G(5)
CWR29H(3)336(1)(2)F(5)
CWR29H(3)336(1)(2)G(5)
CWR29H(3)336(1)(2)H(5)
CWR29H(3)476(1)(2)G(5)
CWR29H(3)476(1)(2)H(5)
CWR29H(3)686(1)(2)G(5)
CWR29H(3)686(1)(2)H(5)
CWR29H(3)107(1)(2)H(5)
CWR29J(3)474(1)(2)A(5)
CWR29J(3)684(1)(2)A(5)
CWR29J(3)684(1)(2)B(5)
CWR29J(3)105(1)(2)A(5)
CWR29J(3)105(1)(2)B(5)
CWR29J(3)155(1)(2)B(5)
CWR29J(3)155(1)(2)C(5)
CWR29J(3)225(1)(2)B(5)
CWR29J(3)225(1)(2)D(5)
CWR29J(3)335(1)(2)D(5)
CWR29J(3)335(1)(2)E(5)
CWR29J(3)475(1)(2)E(5)
CWR29J(3)685(1)(2)E(5)
CWR29J(3)685(1)(2)F(5)
CWR29J(3)106(1)(2)E(5)
CWR29J(3)106(1)(2)F(5)
CWR29J(3)156(1)(2)F(5)
CWR29J(3)156(1)(2)G(5)
CWR29J(3)226(1)(2)G(5)
CWR29J(3)226(1)(2)H(5)
CWR29J(3)336(1)(2)H(5)
CWR29J(3)476(1)(2)H(5)
CWR29J(3)476(1)(2)X(5)
CWR29K(3)334(1)(2)A(5)
CWR29K(3)474(1)(2)A(5)
CWR29K(3)684(1)(2)B(5)
CWR29K(3)105(1)(2)B(5)
CWR29K(3)105(1)(2)C(5)
CWR29K(3)155(1)(2)D(5)
CWR29K(3)225(1)(2)D(5)
µF
KEMET/EIA
(See below for
part options)
(See below for
part options)
Rated
Cap
Case Code/
Case Size
KEMET Part Number
MIL-PRF-55365/11
Part Number
VDC @ 85ºC
µF
KEMET/EIA
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
25
25
25
25
25
25
25
6.8
10
10
10
15
15
22
22
33
33
33
47
47
68
68
100
0.47
0.68
0.68
1
1
1.5
1.5
2.2
2.2
3.3
3.3
4.7
6.8
6.8
10
10
15
15
22
22
33
47
47
0.33
0.47
0.68
1
1
1.5
2.2
VDC @ 85ºC
Rated
Voltage
Maximum
Operating
Temp
DF
ESR
% @ +20ºC
120 Hz Max
8.0
6.0
6.0
6.0
6.0
8.0
8.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
10.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω @ +20ºC
100 kHz Max
0.9
2.0
1.2
0.667
1.2
0.8
0.8
0.3
0.8
0.3
0.2
0.3
0.2
0.3
0.2
0.2
7.5
7.5
5.6
7.5
4.8
3.6
2.4
3.6
1.7
2.0
1.2
1.7
1.5
0.7
1.5
0.8
0.8
0.275
0.625
0.18
0.18
0.18
0.11
7.5
7.5
4.0
4.0
2.6
1.7
2.0
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
µA @ +20ºC % @ +20ºC 120 Ω @ +20ºC
Max/5 Min
Hz Max
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Maximum
Operating Temp
MSL
µA @ +20ºC
Max/5 Min
1.0
2.0
2.0
2.0
2.0
2.0
3.0
4.0
5.0
6.0
5.0
10.0
10.0
10.0
10.0
15.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
2.0
2.0
3.0
3.0
4.0
4.0
6.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
DC
Leakage
DF
ESR
ºC
MSL
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
7
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Table 1 – Ratings & Part Number Reference cont'd
Rated Rated Case Code/
Voltage Cap
Case Size
KEMET Part
Number
MIL–PRF–55365/11
DC
Part Number
Leakage
E/2010
E/2010
F/2214
F/2214
G/2711
G/2711
G/2711
H/2915
G/2711
H/2915
X/2824
H/2915
X/2824
A/1005
A/1005
B/1505
C/2005
D/1510
E/2010
F/2214
G/2711
G/2711
H/2915
H/2915
X/2824
A/1005
A/1005
B/1505
B/1505
C/2005
D/1510
E/2010
F/2214
F/2214
G/2711
H/2915
(See below for
part options)
T429E225(1)025(2)(3)(4)
T429E335(1)025(2)(3)(4)
T429F475(1)025(2)(3)(4)
T429F685(1)025(2)(3)(4)
T429G685(1)025(2)(3)(4)
T429G106(1)025(2)(3)(4)
T429G156(1)025(2)(3)(4)
T429H156(1)025(2)(3)(4)
T429G226(1)025(2)(3)(4)
T429H226(1)025(2)(3)(4)
T429X226(1)025(2)(3)(4)
T429H336(1)025(2)(3)(4)
T429X336(1)025(2)(3)(4)
T429A224(1)035(2)(3)(4)
T429A334(1)035(2)(3)(4)
T429B474(1)035(2)(3)(4)
T429C684(1)035(2)(3)(4)
T429D105(1)035(2)(3)(4)
T429E155(1)035(2)(3)(4)
T429F335(1)035(2)(3)(4)
T429G475(1)035(2)(3)(4)
T429G685(1)035(2)(3)(4)
T429H685(1)035(2)(3)(4)
T429H106(1)035(2)(3)(4)
T429X156(1)035(2)(3)(4)
T429A104(1)050(2)(3)(4)
T429A154(1)050(2)(3)(4)
T429B224(1)050(2)(3)(4)
T429B334(1)050(2)(3)(4)
T429C474(1)050(2)(3)(4)
T429D684(1)050(2)(3)(4)
T429E105(1)050(2)(3)(4)
T429F155(1)050(2)(3)(4)
T429F225(1)050(2)(3)(4)
T429G335(1)050(2)(3)(4)
T429H475(1)050(2)(3)(4)
(See below for
part options)
CWR29K(3)225(1)(2)E(5)
CWR29K(3)335(1)(2)E(5)
CWR29K(3)475(1)(2)F(5)
CWR29K(3)685(1)(2)F(5)
CWR29K(3)685(1)(2)G(5)
CWR29K(3)106(1)(2)G(5)
CWR29K(3)156(1)(2)G(5)
CWR29K(3)156(1)(2)H(5)
CWR29K(3)226(1)(2)G(5)
CWR29K(3)226(1)(2)H(5)
CWR29K(3)226(1)(2)X(5)
CWR29K(3)336(1)(2)H(5)
CWR29K(3)336(1)(2)X(5)
CWR29M(3)224(1)(2)A(5)
CWR29M(3)334(1)(2)A(5)
CWR29M(3)474(1)(2)B(5)
CWR29M(3)684(1)(2)C(5)
CWR29M(3)105(1)(2)D(5)
CWR29M(3)155(1)(2)E(5)
CWR29M(3)335(1)(2)F(5)
CWR29M(3)475(1)(2)G(5)
CWR29M(3)685(1)(2)G(5)
CWR29M(3)685(1)(2)H(5)
CWR29M(3)106(1)(2)H(5)
CWR29M(3)156(1)(2)X(5)
CWR29N(3)104(1)(2)A(5)
CWR29N(3)154(1)(2)A(5)
CWR29N(3)224(1)(2)B(5)
CWR29N(3)334(1)(2)B(5)
CWR29N(3)474(1)(2)C(5)
CWR29N(3)684(1)(2)D(5)
CWR29N(3)105(1)(2)E(5)
CWR29N(3)155(1)(2)F(5)
CWR29N(3)225(1)(2)F(5)
CWR29N(3)335(1)(2)G(5)
CWR29N(3)475(1)(2)H(5)
µF
KEMET/EIA
(See below for
part options)
(See below for
part options)
Rated
Cap
Case Code/
Case Size
KEMET Part Number
MIL-PRF-55365/11
Part Number
VDC @ 85ºC
µF
KEMET/EIA
25
25
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
35
35
35
35
35
35
50
50
50
50
50
50
50
50
50
50
50
2.2
3.3
4.7
6.8
6.8
10
15
15
22
22
22
33
33
0.22
0.33
0.47
0.68
1
1.5
3.3
4.7
6.8
6.8
10
15
0.1
0.15
0.22
0.33
0.47
0.68
1
1.5
2.2
3.3
4.7
VDC @ 85ºC
Rated
Voltage
Maximum
Operating
Temp
DF
ESR
% @ +20ºC
120 Hz Max
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
8.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
Ω @ +20ºC
100 kHz Max
1.0
1.2
0.7
0.8
0.3
0.35
0.35
0.2
0.35
0.18
0.16
0.18
0.13
12.0
12.0
6.8
4.0
2.2
1.3
0.7
0.375
0.375
0.5
0.5
0.19
12.0
12.0
6.8
4.8
3.2
2.3
1.7
1.1
0.7
0.5
0.5
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
Reflow Temp
≤ 260ºC
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
µA @ +20ºC % @ +20ºC 120 Ω @ +20ºC
Max/5 Min
Hz Max
100 kHz Max
ºC
Reflow Temp
≤ 260ºC
Maximum
Operating Temp
MSL
µA @ +20ºC
Max/5 Min
1.0
1.0
2.0
2.0
2.0
3.0
4.0
4.0
6.0
6.0
6.0
10.0
10.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
3.0
3.0
4.0
6.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
3.0
DC
Leakage
DF
ESR
ºC
MSL
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert failure rate letter per the Ordering Information found on page 2. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
8
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Recommended Voltage Derating Guidelines
85°C to 125°C
120%
VR
67% of VR
100%
50% of VR
33% of VR
% Working Voltage
% Change in Working DC
Voltage with Temperature
Recommended Maximum
Application Voltage
-55°C to 85°C
80%
60%
40%
20%
0%
% Change in Working DC Voltage
with Temperature
67%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
-55
25
33%
85
Temperature (ºC)
125
Ripple Current/Ripple Voltage
Permissible AC ripple voltage and current are related to equivalent
series resistance (ESR) and the power dissipation capabilities of
the device. Permissible AC ripple voltage which may be applied is
limited by two criteria:
1. The positive peak AC voltage plus the DC bias voltage, if any,
must not exceed the DC voltage rating of the capacitor.
2. The negative peak AC voltage in combination with bias
voltage, if any, must not exceed the allowable limits specified for
reverse voltage. See the Reverse Voltage section for allowable
limits.
The maximum power dissipation by case size can be determined
using the table at right. The maximum power dissipation rating
stated in the table must be reduced with increasing environmental
operating temperatures. Refer to the table below for temperature
compensation requirements.
KEMET
Case Code
EIA
Case Code
A
B
C
D
E
F
G
H
1005
1505
2005
1510
2010
2214
2711
2915
Maximum Power
Dissipation (P max)
mWatts @ 25°C
w/+20°C Rise
50
70
75
80
90
100
125
150
The maximum power dissipation rating must be reduced with increasing
environmental operating temperatures. Refer to the Temperature Compensation
Multiplier table for details.
Temperature Compensation Multipliers
for Maximum Ripple Current
T ≤ 25°C
1.00
T ≤ 85°C
0.90
T ≤ 125°C
0.40
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms ripple
current or voltage may be determined.
I(max) = √P max/R
E(max) = Z √P max/R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P max = maximum power dissipation (watts)
R = ESR at specified frequency (ohms)
Z = Impedance at specified frequency (ohms)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
9
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature
Permissible Transient Reverse Voltage
25°C
85°C
125°C
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET
Metric
Size
Code
Case
A¹
B
C
D
E
F
G
H
X
EIA
1005
1505
2005
1510
2010
2214
2711
2915
2824
Density Level A:
Maximum (Most) Land
Protrusion (mm)
L
2.19
2.30
2.30
2.30
2.30
2.30
2.81
2.81
2.73
W
1.44
1.44
1.44
2.58
2.58
3.47
2.84
3.84
3.22
S
0.15
1.20
2.47
1.20
2.47
2.98
3.10
3.61
3.46
V1
5.54
6.80
8.08
6.80
8.08
8.58
9.72
10.24
9.92
Density Level B:
Median (Nominal) Land
Protrusion (mm)
V2
2.66
2.66
2.66
3.92
3.92
4.82
4.18
5.20
6.80
L
1.89
1.90
1.90
1.90
1.90
1.90
2.41
2.41
2.33
W
1.32
1.32
1.32
2.46
2.46
3.35
2.72
3.72
3.10
S
0.15
1.40
2.67
1.40
2.67
3.18
3.30
3.81
3.66
V1
4.44
5.70
6.98
5.70
6.98
7.48
8.62
9.14
8.82
Density Level C:
Minimum (Least) Land
Protrusion (mm)
V2
2.16
2.16
2.16
3.42
3.42
4.32
3.68
4.70
6.30
L
1.52
1.52
1.52
1.52
1.52
1.52
2.03
2.03
1.95
W
1.22
1.22
1.22
2.36
2.36
3.25
2.62
3.62
3.00
S
0.29
1.56
2.83
1.56
2.83
3.34
3.46
3.97
3.82
V1
3.58
4.84
6.12
4.84
6.12
6.62
7.76
8.28
7.96
V2
1.90
1.90
1.90
3.16
3.16
4.06
3.42
4.44
6.04
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes.
Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification
testing based on the conditions outlined in IPC standard 7351 (IPC–7351).
¹ Land pattern geometry is too small for silkscreen outline.
V1
L
L
W
W
V2
S
Grid Placement Courtyard
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
10
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Soldering Process
Please note that although the X/7343–43 case size can withstand
wave soldering, the tall profile (4.3 mm maximum) dictates care in
wave process development.
Hand soldering should be performed with care due to the difficulty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reflow occurs. Once reflow occurs, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reflow operations, a slight darkening of the goldcolored epoxy may be observed. This slight darkening is normal
and not harmful to the product. Marking permanency is not
affected by this change.
Profile Feature
SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)
100°C
150°C
Temperature Maximum (TSmax)
150°C
200°C
Time (ts) from Tsmin to Tsmax)
60 – 120 seconds
60 – 120 seconds
3°C/seconds maximum
Ramp-up Rate (TL to TP)
3°C/seconds maximum
Liquidous Temperature (TL)
183°C
217°C
Time Above Liquidous (tL)
60 – 150 seconds
220°C*
235°C**
60 – 150 seconds
250°C*
260°C**
Peak Temperature (TP)
Time within 5°C of Maximum
Peak Temperature (tP)
Ramp-down Rate (TP to TL)
20 seconds maximum
30 seconds maximum
6°C/seconds maximum
6°C/seconds maximum
Time 25°C to Peak Temperature
6 minutes maximum
8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reflow.
*Case Size D, E, P, Y, and X
**Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z
TP
TL
Temperature
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR, or vapor phase reflow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET's recommended profile
conditions for convection and IR reflow reflect the profile conditions
of the IPC/J–STD–020D standard for moisture sensitivity testing.
The devices can safely withstand a maximum of three reflow
passes at these conditions.
tP
Maximum Ramp Up Rate = 3ºC/seconds
Maximum Ramp Down Rate = 6ºC/seconds
tL
Tsmax
Tsmin
25
tS
25ºC to Peak
Time
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature– reels may soften or warp and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60%
relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
11
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Construction
Molded Epoxy
Case
Detailed Cross Section
Polarity Stripe (+)
Silver Paint
(Fourth Layer)
Tantalum Wire
Leadframe
(- Cathode)
Washer
Tantalum Wire
Weld
(to attach wire)
Carbon
(Third Layer)
Silver Adhesive
Leadframe
(+ Anode)
Molded Epoxy
Case
MnO2
(Second Layer)
Washer
Ta2O5 Dielectric
(First Layer)
Tantalum
Capacitor Marking
KEMET
CWR 29
Style
Polarity
Indicator (+)
Date Code *
1 digit = Last number of Year
9 = 2009
0 = 2010
1 = 2011
2 = 2012
3 = 2013
4 = 2014
2nd and 3rd digit = Week of the Year
01 = 1st week of the Year to
52 = 52nd week of the Year
st
Picofarad
Code
KEMET
ID
Rated
Voltage
Date
Code*
* 230 = 30th week of 2012
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
12
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Tape & Reel Packaging Information
KEMET’smoldedtantalumandaluminumchipcapacitorfamiliesarepackagedin8and12mmplastictapeon7"and13"reelsin
accordance with EIA Standard 481:EmbossedCarrierTapingofSurfaceMountComponentsforAutomaticHandling.Thispackaging
systemiscompatiblewithalltape-fedautomaticpick-and-placesystems.
8 mm (0.315")
or
12 mm (0.472")
Top Tape Thickness
0.10 mm (0.004")
Maximum Thickness
180 mm (7.0")
or
330 mm (13.0")
Table 3 – Packaging Quantity
KEMET Case
Codes
A
B
C
D
E
F
G
H
X
1005
1505
2005
1510
2010
2214
2711
2915
2824
Tape
Width
(mm)
8
12
12
12
12
12
12
12
12
Tape and Reel Dimensions
180 mm
330 mm
(7" diameter) (13" diameter)
2500
2500
2500
2500
2500
500
500
500
500
9500
9500
9500
9500
9500
3500
2500
2500
2500
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
13
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
P2
T
T2
ØDo
Po
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
E1
Ao
F
Ko
B1
S1
W
E2
Bo
P1
T1
Center Lines of Cavity
B 1 is for tape feeder reference only,
including draft concentric about B o.
Embossment
For cavity size,
see Note 1 Table 4
ØD 1
Cover Tape
User Direction of Unreeling
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
D0
8 mm
12 mm
1.5+0.10/-0.0
(0.059+0.004/-0.0)
16 mm
D1 Minimum
Note 1
1.0
(0.039)
1.5
(0.059)
B1 Maximum
Note 4
4.35
(0.171)
E1
P0
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
P2
2.0 ±0.05
(0.079 ±0.002)
2.0 ±0.1
(0.079 ±0.059)
RReference
Note 2
25.0
(0.984)
30
(1.181)
S1 Minimum
T Maximum T1 Maximum
Note 3
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
E2 Minimum
F
8 mm
Single (4 mm)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
12 mm
Single (4 mm) &
Double(8mm)
8.2
(0.323)
10.25
(0.404)
16 mm
Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
P1
2.0 ±0.05 or 4.0 ±0.10
(0.079 ±0.002 or 0.157 ±0.004)
2.0 ±0.05 (0.079 ±0.002) or 4.0
5.5 ±0.05
±0.10 (0.157 ±0.004) or 8.0 ±0.10
(0.217 ±0.002)
(0.315 ±0.004)
7.5±0.10
4.0 ±0.10 (0.157 ±0.004) to 12.0
(0.295 ±0.004)
±0.10 (0.472 ±0.004)
T2 Maximum
WMaximum A0, B0 & K0
2.5
(0.098)
8.3
(0.327)
4.6
(0.181)
12.3
(0.484)
8.0 (0.315)
16.3
(0.642)
Note 5
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape, with or without components, shall pass around R without damage (see Figure 4).
3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3).
(e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
14
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: Thetotalpeelstrengthofthecovertapefromthecarriertapeshallbe:
Tape Width
Peel Strength
8 mm
0.1to1.0Newton(10to100gf)
12 and 16 mm
0.1to1.3Newton(10to130gf)
Thedirectionofthepullshallbeoppositethedirectionofthecarriertapetravel.Thepullangleofthecarriertapeshallbe165°to180°
fromtheplaneofthecarriertape.Duringpeeling,thecarrierand/orcovertapeshallbepulledatavelocityof300±10mm/minute.
3. Labeling:Barcodelabeling(standardorcustom)shallbeonthesideofthereeloppositethesprocketholes.Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
°
T
Maximum Component Rotation
Top View
Maximum Component Rotation
Side View
Typical Pocket Centerline
Tape
Width (mm)
8,12
16 – 200
Bo
Maximum
Rotation (
20
10
°
T)
Typical Component Centerline
Ao
Figure 3 – Maximum Lateral Movement
8 mm & 12 mm Tape
0.5 mm maximum
0.5 mm maximum
16 mm Tape
°
s
Tape
Maximum
Width (mm) Rotation (
8,12
20
16 – 56
10
72 – 200
5
°
S)
Figure 4 – Bending Radius
Embossed
Carrier
Punched
Carrier
1.0 mm maximum
1.0 mm maximum
R
Bending
Radius
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
R
T2003_T429 • 6/17/2015
15
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Figure 5 – Reel Dimensions
Full Radius,
See Note
W3 (Includes
Access Hole at
Slot Location
(Ø 40 mm minimum)
flange distortion
at outer edge)
W2 (Measured at hub)
D
A
(See Note)
N
C
(Arbor hole
diameter)
B
(see Note)
W1 (Measured at hub)
If present,
tape slot in core
for tape start:
2.5 mm minimum width x
10.0 mm minimum depth
Note: Drive spokes optional; if used, dimensions B and D shall apply.
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size
A
B Minimum
C
DMinimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0+0.5/-0.2
(0.521+0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size
N Minimum
W1
W2Maximum
W3
50
(1.969)
8.4+1.5/-0.0
(0.331+0.059/-0.0)
12.4+2.0/-0.0
(0.488+0.078/-0.0)
16.4+2.0/-0.0
(0.646+0.078/-0.0)
14.4
(0.567)
18.4
(0.724)
22.4
(0.882)
Shall accommodate tape width
withoutinterference
8 mm
12 mm
16 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
16
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Figure 6 – Tape Leader & Trailer Dimensions
Embossed Carrier
Carrier Tape
Punched Carrier
8 mm & 12 mm only
END
Round Sprocket Holes
START
Top Cover Tape
Elongated Sprocket Holes
(32 mm tape and wider)
Trailer
160 mm Minimum
Components
100 mm
Minimum Leader
400 mm Minimum
Top Cover Tape
Figure 7 – Maximum Camber
Elongated sprocket holes
(32 mm & wider tapes)
Carrier Tape
Round Sprocket Holes
1 mm Maximum, either direction
Straight Edge
250 mm
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
17
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax:864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
FortLauderdale,FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston,UnitedKingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo,Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835KEMETWay
Simpsonville, SC 29681
Southeast
LakeMary,FL
Tel: 407-855-8886
Northeast
Wilmington,MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
18
Tantalum Surface Mount Capacitors – MIL–PRF (CWR Style)
T429 Series MIL–PRF–55365/11 (CWR29 Style)
Disclaimer
Allproductspecifications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsibleforcheckingand
verifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.
AllInformationgivenhereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuchapplications,butare
notintendedtoconstitute–andKEMETspecificallydisclaims–anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse.TheInformationisintendedforuseonly
bycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.AnytechnicaladviceinferredfromthisInformationorotherwise
providedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumesnoobligationorliabilityfortheadvicegivenorresultsobtained.
AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponentfailuresmaystill
occur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards(suchasinstallationofprotective
circuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjuryorpropertydamage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatothermeasuresmaynot
berequired.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
T2003_T429 • 6/17/2015
19