2MH-XD Series 5.2 KV ISOLATED 2W REGULATED SINGLE OUTPUT DIP24 Converters SELECTION GUIDE INPUT VOLTAGE (VDC) Nominal INPUT CURRENT NO LOAD INPUT CURRENT FULL LOAD OUTPUT VOLTAGE (VDC) OUTPUT CURRENT (max. mA) EFFICIENCY FULL LOAD (% TYP.) 2MH0505XD 5 50 615 5 400 65 2MH0509XD 5 47 545 9 200 66 2MH1205XD 12 40 252 5 400 66 2MH1209XD 12 38 220 9 200 68 2MH1212XD 12 35 245 12 167 68 2MH2405XD 24 16 128 5 400 65 Order code FEATURES ◆ ◆ Technical Data Input Parameter INPUT 5, 12 and 24 VDC PI TYPE INPUT FILTER ◆ OUTPUT 5, 9,12VDC ◆ HIGH EFFICIENCY UP TO 78% ◆ STANDARD 24 PIN DIP PACKAGE ◆ Other specifications please inquire Data 5VDC 12VDC 24VDC 4.5~5.5V 10.8~13.2V 21.6~26.4V DC Input Voltage fsw Switching Frequency 20KHZ typ η Efficiency 50% Input Filter Π-Filter LOW OUTPUT RIPPLE & NOISE ◆ Conditions Uin Electrical Specifications Typical at + 25° C, nominal input voltage, rated output current unless otherwise specified Input Specifications MODEL SELECTION ① ② ③ ④ ⑤ 2MH 05 05 X④D⑤ ①Product Series ③Output Voltage ⑤DIP24 Package Style Voltage range ±10 % Filter Pi Network Isolation Specifications ②Input Voltage ④Fixed Input s Rated voltage 5200 VDC Leakage current 1 mA Resistance 109Ohm Capacitance 60 pF typ. Output Specifications APPLICATIONS Voltage accuracy ±2%, max. The 2MH-XD series offer 2 watts of output power from a package in an IC compatible 24 pin DIP configuration without derating to 71℃ ambient temperature. MH-XD features 5200VDC of isolation voltage. Ripple and noise (at 20 MHz BW) 75 mV p-p, max. Short circuit protection Continuous , restart automatic Line voltage regulation ±0.5% max. Load voltage regulation ±0.5% max. Temperature coefficient ±0.02 % /℃ General Specifications Efficiency Switching frequency 65% to 85% 125 KHz, typ. Environmental Specifications Operating temperature (ambient) -40℃ to +85℃ Storage temperature - 55℃ to + 125℃ Derating See graph Humidity Up to 90 %, non condensing Cooling Free air convection Physical Characteristics Dimensions MICRODC R ESERVES THE COPYRIGHT Weight Case material http://www.microdc.cn 31.8 x 20.3x 10.2 mm 1.25 x 0.80 x 0.40 inches 12.2 g Non conductive black plastic Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 2MH-XD Series MECHANICAL DIMENSIONS RECOMMENDED FOOTPRINT Temperature derating curve TUBE OUTLINE DIMENSIONS Note: Unit :mm[inch] General tolerances: ±0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 19pcs L=220mm[8.661inch] Tube Quantity: 7pcs FOOTPRINT DETAILS Pin http://www.microdc.cn Connection Single 1、2 +V Input 3、10、11 Omitted 12 -V Output 13 +V Output 14、15、22 Omitted 23、24 -V Input Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2