RENESAS HAT2184WP

HAT2184WP
Silicon N Channel Power MOS FET
Power Switching
REJ03G0536-0500
Rev.5.00
Nov 27, 2006
Features
• Low on-resistance
• Low drive current
• High density mounting
Outline
RENESAS Package code: PWSN0008DA-A
(Package name: WPAK)
5 6 7 8
D D D D
5 6 7 8
4 3 2 1
1, 2, 3
Source
4
Gate
5, 6, 7, 8 Drain
4
G
S S S
1 2 3
Absolute Maximum Ratings
(Ta = 25°C)
Item
Drain to source voltage
Gate to source voltage
Drain current
Drain peak current
Body-drain diode reverse drain current
Body-drain diode reverse drain peak current
Avalanche current
Avalanche energy
Channel dissipation
Channel to case thermal impedance
Channel temperature
Storage temperature
Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1%
2. Value at Tc = 25°C
3. STch = 25°C, Tch ≤ 150°C
Rev.5.00 Nov 27 2006 page 1 of 6
Symbol
VDSS
VGSS
ID
ID (pulse)Note1
IDR
Ratings
150
±30
14
28
14
Unit
V
V
A
A
A
IDR (pulse)Note1
IAPNote3
EARNote3
Pch Note2
θch-c
Tch
Tstg
28
14
14.7
25
5
150
–55 to +150
A
A
mJ
W
°C/W
°C
°C
HAT2184WP
Electrical Characteristics
(Ta = 25°C)
Item
Drain to source breakdown voltage
Zero gate voltage drain current
Gate to source leak current
Gate to source cutoff voltage
Forward transfer admittance
Static drain to source on state
resistance
Input capacitance
Output capacitance
Reverse transfer capacitance
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Total gate charge
Gate to source charge
Gate to drain charge
Body-drain diode forward voltage
Body-drain diode reverse recovery time
Notes: 4. Pulse test
Rev.5.00 Nov 27 2006 page 2 of 6
Symbol
V(BR)DSS
IDSS
IGSS
VGS(off)
|yfs|
RDS(on)
Min
150
—
—
3.0
6
—
Typ
—
—
—
—
10
0.097
Max
—
1
±0.1
4.5
—
0.11
Unit
V
µA
µA
V
S
Ω
Ciss
Coss
Crss
td(on)
tr
td(off)
tf
Qg
Qgs
Qgd
—
—
—
—
—
—
—
—
—
—
710
160
13
26
31
53
7
15
4.3
5.6
—
—
—
—
—
—
—
—
—
—
pF
pF
pF
ns
ns
ns
ns
nC
nC
nC
VDF
trr
—
—
0.85
95
1.4
—
V
ns
Test conditions
ID = 10 mA, VGS = 0
VDS = 150 V, VGS = 0
VGS = ±30 V, VDS = 0
VDS = 10 V, ID = 1 mA
ID = 7 A, VDS = 10 V Note4
ID = 7 A, VGS = 10 VNote4
VDS = 25 V
VGS = 0
f = 1 MHz
ID = 7 A
VGS = 10 V
RL = 10.7 Ω
Rg = 10 Ω
VDD = 120 V
VGS = 10 V
ID = 14 A
IF = 14 A, VGS = 0 Note4
IF = 14 A, VGS = 0
diF/dt = 100 A/µs
HAT2184WP
Main Characteristics
Maximum Safe Operation Area
Power vs. Temperature Derating
100
Drain Current ID (A)
30
30
20
10
s
DC
(Tc Op
= 2 era
5 ° tion
C)
3
1
0.3
10
0 µ µs
s
PW = 10 ms
(1shot)
0.1
0.03 Operation in this
is limited by
0.01 area
R
DS(on)
0
20
Drain Current ID (A)
10
1m
10
0.003
16
50
100
150
Ta = 25°C
0.001
1
200
3
100
30
10
300
1000
Case Temperature Tc (°C)
Drain to Source Voltage VDS (V)
Typical Output Characteristics
Typical Transfer Characteristics
20
10 V
7V
VDS = 10 V
Pulse Test
Pulse Test
8V
6.5 V
12
5.9 V
8
VGS = 5.4 V
4
Drain Current ID (A)
Channel Dissipation Pch (W)
40
16
12
Tc = 75°C
8
25°C
4
−25°C
2
4
6
8
0
10
2
4
6
8
10
Drain to Source Voltage VDS (V)
Gate to Source Voltage VGS (V)
Drain to Source Saturation Voltage vs.
Gate to Source Voltage
Static Drain to Source on State Resistance
vs. Drain Current
8
Pulse Test
6
4
ID = 28 A
2
0
14 A
4
8
12
16
7A
20
Gate to Source Voltage VGS (V)
Rev.5.00 Nov 27 2006 page 3 of 6
Drain to Source on State Resistance
RDS(on) (Ω)
Drain to Source Saturation Voltage
VDS(on) (V)
0
1
VGS = 10 V
0.5
0.2
0.1
0.05
0.02
Pulse Test
0.01
1
3
10
30
100
300
Drain Current ID (A)
1000
Pulse Test
0.4
ID = 28 A
0.3
14 A
0.2
7A
0.1
0
−25
0
25
50
75
100 125 150
30
Tc = −25°C
10
25°C
75°C
3
1
0.3
0.1
0.1
VDS = 10 V
Pulse Test
0.3
1
3
10
30
Case Temperature Tc (°C)
Drain Current ID (A)
Typical Capacitance vs.
Drain to Source Voltage
Dynamic Input Characteristics
VGS = 0
f = 1 MHz
3000
1000
Ciss
300
100
Coss
30
10
Crss
3
1
0
50
100
100
240
16
ID = 14 A
VGS
VDD = 30 V
60 V
120 V
180
12
VDS
120
8
60
4
VDD = 120 V
60 V
30 V
0
150
4
8
12
0
20
16
Drain to Source Voltage VDS (V)
Gate Charge Qg (nC)
Switching Characteristics
Reverse Drain Current vs.
Source to Drain Voltage
20
tf
VGS = 10 V, VDD = 75 V
PW = 5 µs, duty ≤ 1 %
RG = 10 Ω
100
Reverse Drain Current IDR (A)
1000
Switching Time t (ns)
100
tr
td(off)
td(on)
tf
10
tr
1
0.1
0.3
1
3
Drain Current
Rev.5.00 Nov 27 2006 page 4 of 6
10
30
ID (A)
100
16
12
8
4
10 V
5V
VGS = 0, −5 V
Pulse Test
0
0.4
0.8
1.2
1.6
2.0
Source to Drain Voltage VSD (V)
Gate to Source Voltage VGS (V)
VGS = 10 V
Forward Transfer Admittance |yfs| (S)
0.5
10000
Capacitance C (pF)
Forward Transfer Admittance vs.
Drain Current
Static Drain to Source on State Resistance
vs. Temperature
Drain to Source Voltage VDS (V)
Static Drain to Source on State Resistance
RDS(on) (Ω)
HAT2184WP
HAT2184WP
Gate to Source Cutoff Voltage
vs. Case Temperature
5
Gate to Source Cutoff Voltage
VGS(off) (V)
VDS = 10 V
ID = 10 mA
4
1 mA
3
0.1 mA
2
1
0
-25
0
25
50
75
100 125 150
Case Temperature Tc (°C)
Normalized Transient Thermal Impedance γs (t)
Normalized Transient Thermal Impedance vs. Pulse Width
3
Tc = 25°C
1
D=1
0.5
0.3
0.2
0.1
θ ch - c(t) = γs (t) • θ ch - c
θ ch - c = 5°C/ W, Tc = 25°C
0.1
0.05
0.03
PDM
0.02
1
0.0
D=
e
uls
PW
p
ot
T
h
0.01
10 µ
1s
PW
T
100 µ
1m
10 m
100 m
1
10
Pulse Width PW (s)
Switching Time Test Circuit
Waveform
90%
Vout
Monitor
Vin Monitor
D.U.T.
Vin
10%
RL
Vout
10 Ω
Vin
10 V
VDD
= 75V
10%
90%
td(on)
Rev.5.00 Nov 27 2006 page 5 of 6
10%
tr
90%
td(off)
tf
HAT2184WP
Package Dimensions
JEITA Package Code
−
RENESAS Code
PWSN0008DA-A
Previous Code
WPAKV
MASS[Typ.]
0.075g
0.8Max
5.1 ± 0.2
Unit: mm
0.5 ± 0.15
Package Name
WPAK
4.21Typ
1.27Typ
+0.1
-0.2
5.9
3.8 ± 0.2
+0.1
-0.3
6.1
3.9 ± 0.2
0.05Max
0Min
Stand-off
1.27Typ
0.2Typ
0.5 ± 0.15
0.635Max
0.7Typ
0.04Min
0.4 ± 0.06
4.9 ± 0.1
(Ni/Pd/Au plating)
Notice:The reverse pattern of die-pad
support lead described above exists.
Ordering Information
Part Name
HAT2184WP-EL-E
Quantity
2500 pcs
Shipping Container
Taping
Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of
production before ordering the product.
Rev.5.00 Nov 27 2006 page 6 of 6
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes:
1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes
warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property
rights or any other rights of Renesas or any third party with respect to the information in this document.
2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,
but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.
3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass
destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws
and regulations, and procedures required by such laws and regulations.
4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this
document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,
please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be
disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )
5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a
result of errors or omissions in the information included in this document.
6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability
of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular
application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.
7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications
or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality
and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or
undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall
have no liability for damages arising out of the uses set forth above.
8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:
(1) artificial life support devices or systems
(2) surgical implantations
(3) healthcare intervention (e.g., excision, administration of medication, etc.)
(4) any other purposes that pose a direct threat to human life
Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing
applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all
damages arising out of such applications.
9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,
movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages
arising out of the use of Renesas products beyond such specified ranges.
10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain
rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage
caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and
malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software
alone is very difficult, please evaluate the safety of the final products or system manufactured by you.
11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as
swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.
Renesas shall have no liability for damages arising out of such detachment.
12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.
13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have
any other inquiries.
http://www.renesas.com
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0