NHD‐5.7‐320240WFB‐ETXI#‐1 TFT (Thin‐Film‐Transistor) Color Liquid Crystal Display Module NHD‐ 5.7‐ 320240‐ WFB‐ E‐ T‐ X‐ I‐ #‐1 Newhaven Display 5.7” Diagonal 320xRGBx240 pixels Model Built‐in driver + Controller (16‐bit) White LED backlight TFT 6:00 view, Wide Temp RoHS Compliant Newhaven Display International, Inc. 2511 Technology Drive, Suite 101 Elgin IL, 60124 Ph: 847‐844‐8795 Fax: 847‐844‐8796 www.newhavendisplay.com [email protected] [email protected] [1] Document Revision History Revision 0 1 2 3 4 5 Date 7/8/2009 7/29/2009 11/4/2009 3/19/2010 5/24/2011 1/6/2012 Description Initial Release MECHANICAL DRAWING UPDATE Quality Information Update Pin description updated Electrical characteristics updated Pixel data format updated Functions and Features • • • • 320xRGBx240 resolution LED backlight 16‐bit parallel interface SSD1963 Controller [2] Changed by CL CL BE BE AK AK Mechanical Drawing 149.0±0.5 152.0±0.2 4.0 138.7±0.5 118.28±0.2(VA)(Frame) 7.3 15.3 115.20±0.2(AA) 4- PTH (320*3)*240 Dots 94.4 86.40±0.2(AA) 6.2 101.0±0.2 88.6±0.2(VA)(Frame) 200.0±10.0 3 9.43 1 1.0 11.5Max 7.0±0.5 109.0±0.5 4.0 13.76 6.3 7.4 7.0 Newhaven Display NHD-5.7-320240WFB-ETXI #-1 Mechanical Drawing NHD‐5.7‐320240WFB‐ETXI#‐‐1 [4] Pin Description Pin No. Symbol 1 2 3 4 5 6 7‐22 23 24 25 26 27 28 29‐32 GND VCC NC D/C# WR# RD# [DB0‐DB15] NC NC CS# RES# R/L U/D NC External Connection Power Supply Power Supply ‐ MPU MPU MPU MPU ‐ ‐ MPU MPU ‐ ‐ ‐ Function Description Ground Power supply for LCD and logic (3.3V) No Connect Register Select signal – : 1=Data , 0=Command Active LOW Write signal, 8080 MPU interface Active LOW Read signal, 8080 MPU interface Bi‐directional data bus lines No Connect No Connect Active LOW Chip Select signal Active LOW Reset signal Scan direction 1: Right (Tied internally) Scan direction 0: Down (Tied internally) No Connect Recommended LCD connector: 0.5mm pitch 32‐Conductor FFC. Hirose p/n FH12A‐32S‐0.5SH(55) Backlight connector: JST p/n: XHP‐3 Mates with: JST p/n: S3B‐XH‐SM3‐TB [5] Controller Information Built‐in SSD1963 controller. Please download specification at http://www.newhavendisplay.com/app_notes/SSD1963.pdf 8080 Mode Interface: The 8080 mode MPU interface consists of CS#, D/C, RD#, WR#, and DB[15:0]. This interface uses WR# to define a write cycle and RD# to define a read cycle. If the WR# goes LOW when the CS# signal is LOW, the data or command will be latched into the system at the rising edge of WR#. Similarly, the read cycle will start when RD# goes LOW and end at the rising edge of RD#. See the SSD1963 datasheet for detailed timing diagrams. Command Instructions: See the SSD1963 datasheet for the Instruction Table and Command Descriptions. Pixel Data Format: (2‐options for 16‐bit transfer) [6] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage Supply Current Backlight Supply Current Backlight Supply Voltage Backlight Lifetime Symbol Top Tst VCC ICC IB VBL Condition Absolute Max Absolute Max Min. ‐20 ‐30 3.0 VCC=3.3 9.0 10,000 Typ. ‐ ‐ 3.3 121 140 9.4 Max. +70 +80 3.6 210 9.8 Unit ⁰C ⁰C V mA mA V Hr Max. Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms Backlight is 7 Parallel groups of 3‐Serial LEDs each. Optical Characteristics Item Viewing Angle – Top Viewing Angle – Bottom Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise) Response Time (fall) Symbol Cr YL Tr Tr Condition Cr ≥ 10 Cr ≥ 10 Cr ≥ 10 Cr ≥ 10 ‐ ‐ [7] Min. 40 45 50 50 300 200 ‐ ‐ Typ. 50 55 60 60 400 250 10 15 Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 ‐30⁰C , 240hrs 1,2 +70⁰C 240hrs 2 ‐20⁰C , 240hrs 1,2 +60⁰C , 90% RH , 240hrs 1,2 ‐20⁰C,30min ‐> 25⁰C,5min ‐> 70⁰C,30min = 1 cycle 10 cycles 10‐55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [8] Note +80⁰C , 240hrs 3