NHD‐5.7‐320240WFB‐ATXI#‐1 TFT (Thin‐Film‐Transistor) Color Liquid Crystal Display Module NHD‐ 5.7‐ 320240‐ WFB‐ A‐ T‐ X‐ I‐ #‐1 Newhaven Display 5.7” Diagonal 320xRGBx240 pixels Model Built‐in driver, No Controller White LED backlight TFT 6:00 view, Wide Temp RoHS Compliant Newhaven Display International, Inc. 2511 Technology Drive, Suite 101 Elgin IL, 60124 Ph: 847‐844‐8795 Fax: 847‐844‐8796 www.newhavendisplay.com [email protected] [email protected] Document Revision History Revision 0 1 Date 5/23/2012 5/29/2012 Description Initial Release Optical characteristics updated Functions and Features • • • • • 320xRGBx240 resolution LED backlight 24‐bit Parallel RGB interface Built‐in Source Driver: HX8218‐A Built‐in Gate Driver: HX8615 [2] Changed by AK AK Mechanical Drawing 149.0±0.5 152.0±0.2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 4.0 13.76 15.3 115.20±0.2(AA) 4-O3.5 PTH 94.4 109.0±0.5 101.0±0.2 88.6±0.2(VA) 86.40±0.2(AA) 4.0 6.2 7.3 6.3 138.7±0.5 118.28±0.2(VA) 7.4 7.0 17 18 19 20 200.0±10.0 IF1 IF2 POL RESET SPENA SPCL SPDA B0 B1 B2 B3 B4 B5 B6 B7 G0 G1 G2 G3 G4 21 G5 22 G6 23 G7 24 R0 25 R1 R2 26 27 R3 R4 28 R5 29 30 R6 31 R7 Hsync 32 Vsync 33 34 Data CLK 35 AVDD(analog) 36 AVDD(analog) 37 VDD(Digital) 38 VDD(Digital) 39 NPC VGL 40 41 42 43 44 45 46 47 48 49 50 VGL UD VGH LRC GND VCOM VCOM ENB GND GND CON1 3 9.43 1 5.0 3.5 121.4±0.5 1 2 3 Stiffener CON1 0.3 0.36 1 0.12 DOT SIZE SCALE 40/1 1.0 9.9Max 7.0±0.5 50 1 24.5 25.5 SCALE 2:1 A NC K 50 Conductor Side The non-specified tolerance of dimension is 0.2mm. NHD-5.7-320240WFB-ATXI#-1 Pin Description Recommended LCD connector: 50‐pin, 0.5mm pitch FFC connector. Molex 54132‐5097 [4] Backlight: Pin No. Symbol Connection Description 1 VDD Power Supply Red, LED Anode (140mA @ 9.9V) 2 NC ‐ No Connect 3 VSS Power Supply White, LED Cathode Backlight connector: JST p/n: XHP‐3 Mates with: JST p/n: B 3B‐XH‐A Note 1: Input data format IF2, IF1 Input data format L,L (default) Serial RGB L,H Parallel RGB H,L CCIR601 H,H CCIR656 Note 2: Pins 5 and 6 typically pulled high Note 3: Polarity of VCOM (pins 46,47) should be generated from POL (pin 3) Note 4: For digital RGB input data format, both SYNC mode and DE+SYNC mode are supported. If ENB signal is fixed low, SYNC mode is used. Otherwise, DE+SYNC mode is used. Note 5: The phase of POL (pin 3): Driver Information Built‐in Source Driver HX8218‐A: http://www.newhavendisplay.com/app_notes/HX8218.pdf Built‐in Gate Driver HX8615: http://www.newhavendisplay.com/app_notes/HX8615.pdf [5] Electrical Characteristics Item Operating Temperature Range Storage Temperature Range Supply Voltage for Logic Supply Voltage for Analog “H” Level input “L” Level input TFT Gate ON operating voltage TFT Gate OFF operating voltage VCOM driving voltage (Note 6) Supply Current for Digital Supply Current for Analog Supply Current for Gate ON Supply Current for Gate OFF Backlight Supply Voltage Backlight Supply Current Backlight Lifetime Symbol Top Tst VDD AVDD Vih Vil VGH VGL VCOM IDD IAVDD IGH IGL VLED ILED Condition Absolute Max Absolute Max Duty=1/240 Duty=1/240 Duty=1/240 VDD=3.3V, AVDD=5V, VGH=15V, VGL=‐10V VLED=9.9V Min. ‐20 ‐30 3.0 4.5 0.7*VDD 0 ‐ ‐ ‐2.0 ‐ ‐ ‐ ‐ Typ. ‐ ‐ 3.3 5 ‐ ‐ 15 ‐10 ‐ 2.2 4.7 0.05 0.05 9.0 ‐ ‐ 9.9 140 50K Max. +70 +80 3.5 5.5 VDD 0.3*VDD ‐ ‐ 5.5 3.5 7 0.1 0.1 10.5 210 Unit ⁰C ⁰C V V V V V V V mA mA mA mA V mA Hr Max. ‐ ‐ Unit ⁰ ⁰ ⁰ ⁰ cd/m2 ms ms Note 6: VCOM must be adjusted to optimize display quality, contrast ratio, etc. Optical Characteristics Item Viewing Angle – Top (Note 7) Viewing Angle – Bottom (Note 7) Viewing Angle – Left Viewing Angle – Right Contrast Ratio Luminance Response Time (rise) Response Time (fall) Symbol Cr YL Tr Tf Condition Cr ≥ 5 Cr ≥ 5 Cr ≥ 5 Cr ≥ 5 ‐ ‐ Min. 40 60 60 60 ‐ 300 ‐ ‐ Note 7: Viewing direction – 12:00; Gray Scale inversion direction – 6:00. [6] Typ. 60 70 70 70 250 ‐ 15 35 Timing Characteristics CCIR601/656 Interface Input Signal Characteristics Hardware Reset Timing Output Signal Characteristics [7] 24‐bit Parallel RGB Interface AC Timing Characteristics [8] AC Timing Diagrams [9] Waveforms Clock and Data waveform Digital/Analog RGB timing waveform Hsync and Vsync Timing [10] Hsync and Horizontal Control Timing Waveform Hsync and Vertical Shift Clock Timing Waveform [11] CCIR601 Timing Waveform (VS_POL = “H”, HS_POL = “L” in register R2) [12] [13] Clock and Start Pulse Timing Waveform OEH and Data Output timing Waveform Analog Video Signal Characteristics [14] SPI Timing Characteristics [15] Gate Driver Timing Chart [16] [17] Quality Information Test Item Content of Test High Temperature storage Endurance test applying the high storage temperature for a long time. Endurance test applying the low storage temperature for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the low thermal stress for a long time. Endurance test applying the electric stress (voltage & current) and the high thermal with high humidity stress for a long time. Endurance test applying the electric stress (voltage & current) during a cycle of low and high thermal stress. Endurance test applying vibration to simulate transportation and use. Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature / Humidity Operation Thermal Shock resistance Vibration test Static electricity test Test Condition Endurance test applying electric static discharge. 2 ‐30⁰C , 240hrs 1,2 +70⁰C 240hrs 2 ‐20⁰C , 240hrs 1,2 +60⁰C , 90% RH , 240hrs 1,2 ‐20⁰C,30min ‐> 25⁰C,5min ‐> 70⁰C,30min = 1 cycle 10 cycles 10‐55Hz , 15mm amplitude. 60 sec in each of 3 directions X,Y,Z For 15 minutes VS=800V, RS=1.5kΩ, CS=100pF One time Note 1: No condensation to be observed. Note 2: Conducted after 4 hours of storage at 25⁰C, 0%RH. Note 3: Test performed on product itself, not inside a container. Precautions for using LCDs/LCMs See Precautions at www.newhavendisplay.com/specs/precautions.pdf Warranty Information and Terms & Conditions http://www.newhavendisplay.com/index.php?main_page=terms [18] Note +80⁰C , 240hrs 3