LQH2HPN4R7MG0#

LQH2HPN4R7MG0#
# indicates a package specification code.
< List of part numbers with package codes >
LQH2HPN4R7MG0L
Shape
Notes
When applied Rated current to the Products, Inductance will be within −30% of
minimum rated Inductance value.
When applied Rated current to the Products , self temperature rise shall be limited
to 40℃ max.
Keep the temperature(ambient temperature plus self-generation of heat)
under 125℃
References
Packaging
code
Specifications
Minimum quantity
φ180mm Embossed taping
L size
3000
2.5 ±0.2mm
Mass (Typ.)
W size
2.0 ±0.2mm
1 piece
T size
0.9 ±0.1mm
Size code in inch (mm)
1008 (2520)
0.019g
Specifications
Inductance
4.7µH ±20%
Inductance test frequency
1MHz
Rated current (Isat) (Based on Inductance change)
1000mA
Rated current (Itemp) (Based on Temperature rise)
700mA
Max. of DC resistance
0.432Ω
Avg. of DC resistance
0.36Ω±20%
Self resonance frequency (min.)
60MHz
Operating temperature range (Self-temperature rise
is not included)
-40∼85℃
Class of magnetic shield
Magnetic shield of magnetic
powder in resin
1 of 2
1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued
without advance notice. Please check with our sales representatives or product engineers before ordering.
2.This datasheet has only typical specifications because there is no space for detailed specifications.
Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
URL : http://www.murata.com/
Last updated: 2015/09/30
Chart of characteristic data (The charts below may show another part number which shares its characteristics.)
Inductance-Frequency characteristics (Typ.)
Inductance-Current characteristics (Typ.)
Temperature rise characteristics (Typ.)
2 of 2
This PDF data has only typical specifications because there is no space
for detailed specifications.
Therefore, please reviewour product specifications or consult the
approval sheet for product specifications before ordering.
Last updated: 2015/09/30