LQH43CN3R3M33# # indicates a package specification code. < List of part numbers with package codes > LQH43CN3R3M33L Shape Notes When applied Rated current to the Products, Inductance will be within ±20% of initial Inductance value. When applied Rated current to the Products, temperature rise caused by self-generated heat shall be limited to 40℃ max. References Packaging code Specifications Minimum quantity φ180mm Embossed taping L size 4.5 ±0.3mm W size 3.2 ±0.2mm T size 2.6 ±0.2mm Size code in inch (mm) 1812 (4532) 500 Mass (Typ.) 1 piece 0.13g Specifications Inductance 3.3µH ±20% Inductance test frequency 1MHz Rated current (Itemp) (Based on Temperature rise) 1650mA Max. of DC resistance 0.099Ω Avg. of DC resistance 0.076Ω±30% Self resonance frequency (min.) 47MHz Operating temperature range (Self-temperature rise is not included) -40∼85℃ Class of magnetic shield No magnetic shield 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, it s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2015/09/30 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Inductance-Current characteristics (Typ.) Impedance-Frequency characteristics (Typ.) 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2015/09/30