Features • • • • • • • Hermetically Sealed, Metal Enclosure Types (H−suffix) U/L Approved for Class 1, Div 2 Hazardous Locations (H−suffix) Push−to−Test Button Types (B−suffix) Indicator Lamp Types (N−suffix) 8−Pin and 11 −Pin Octal Plug−In Types SPDT, DPDT and 3PDT Types Clear Plastic Dust Cover R02 Series General Purpose, 10 Amp Multicontact AC and DC Relays. AC OPERATED NTE TYPE No. R02−5A10−12 R02−5A10−24 R02−5A10−120 R02−5A10−240 R02−11A10−6 R02−11A10−12 R02−11A10−24 R02−11A10−24B R02−11A10−24H R02−11A10−24N R02−11A10−120 R02−11A10−120B R02−11A10−120H R02−11A10−120N R02−11A10−240 R02−14A10−6 R02−14A10−6M R02−14A10−12 R02−14A10−24 R02−14A10−24B R02−14A10−120 R02−14A10−120B R02−14A10−120H R02−14A10−120N R02−14A10−240 Nom. Voltage 12VAC 24VAC 120VAC 240VAC 6VAC 12VAC 24VAC 24VAC 24VAC 24VAC 120VAC 120VAC 120VAC 120VAC 240VAC 6VAC 6VAC 12VAC 24VAC 24VAC 120VAC 120VAC 120VAC 120VAC 240VAC Contact Arr. SPDT SPDT SPDT SPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT DPDT 3PDT 3PDT 3PDT 3PDT 3PDT 3PDT 3PDT 3PDT 3PDT 3PDT Coil Res. Ohms (Typ) − − − − − − − − − − − − − − − − − − − − − − − − − Nom. Power 3.9VA 3.9VA 3.9VA 3.9VA 2.0VA 2.0VA 2.0VA 2.0VA 3.0VA 2.0VA 2.0VA 2.0VA 3.0VA 2.0VA 2.0VA 3.9VA 3.9VA 2.75VA 2.75VA 2.75VA 2.75VA 2.75VA 3.0VA 2.75VA 2.75VA Max. Contact Cur. @ 28VDC or 120VAC 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A Diag No. D1C D1C D1C D1C D1A D1A D1A D1A D2A D1A D1A D1A D2A D1A D1A D1B D1B D1B D1B D1B D1B D1B D2B D1B D1B DC OPERATED Electrical Specifications Contact R02−5D10−6 6VDC SPDT 30 1.2W 10A D1C R02−5D10−12 12VDC SPDT 120 1.2W 10A D1C R02−5D10−110 110VDC SPDT 10K 1.2W 10A D1C Poles 120VAC 240VAC R02−11D10−6 6VDC DPDT 30 1.2W 10A D1A SPDT 10A (1/10 HP) 10A (1/6 HP) 6A R02−11D10−12 12VDC DPDT 120 1.0W 10A D1A DPDT 10A (1/3 HP) 10A (1/3 HP) 10A R02−11D10−12B 12VDC DPDT 120 1.0W 10A D1A 3PDT 10A (1/3 HP) 6A (1/2 HP) 6A R02−11D10−12H 12VDC DPDT 100 1.5W 10A D2A R02−11D10−12N 12VDC DPDT 120 1.0W 10A D1A R02−11D10−24 24VDC DPDT 470 1.0W 10A D1A R02−11D10−24B 24VDC DPDT 470 1.0W 10A D1A R02−11D10−24H 24VDC DPDT 472 1.2W 10A D2A R02−11D10−24N 24VDC DPDT 470 1.0W 10A D1A R02−11D10−48 48VDC DPDT 1630 1.5W 10A D1A R02−11D10−110 110VDC DPDT 10K 1.2W 10A D1A R02−11D10−110H 110VDC DPDT 8K 1.5W 10A D2A R02−14D10−6 6VDC 3PDT 30 1.2W 10A D1B R02−14D10−12 12VDC 3PDT 120 1.0W 10A D1B R02−14D10−12B 12VDC 3PDT 120 1.0W 10A D1B R02−14D10−24 24VDC 3PDT 470 1.0W 10A D1B R02−14D10−24B 24VDC 3PDT 470 1.0W 10A D1B R02−14D10−48 48VDC 3PDT 1630 1.5W 10A D1B R02−14D10−110 110VDC 3PDT 10K 1.2W 10A D1B Note 1. R02 Series hermetically sealed relays (H−suffix) are UL recognized for Class1, Division 2 (Hazardous locations). ACCESSORIES MOUNTING STYLES SURFACE MOUNT DIN RAIL MOUNT PANEL MOUNT NTE Electronics, Inc. DESCRIPTION 8−PIN OCTAL 11−PIN OCTAL 8−PIN OCTAL 11−PIN OCTAL 8−PIN OCTAL 11−PIN OCTAL NTE TYPE NO. R95−101 R95−104 R95−113, R95−181 R95−114, R95−182 R95−118 R95−119 Voice (973) 748−5089 Contact Rating 28VDC Max Contact Material: 3/16” Silver cadmium oxide Contact Resistance: 0.050 ohms max initial Coil Coil Voltages: See Chart Pick−up Voltage: 80% of nominal or less, DC 80% of nominal or less, AC Resistance: See chart Min Sensitivity: (125mW per pole) Duty Cycle: Continuous Operational Characteristics Timing Values . . . . . Operate Time: 25 mS or less Release Time: 20 mS or less Insulation Characteristics at nominal coil voltage Dielectric Strength Contact To Coil: 1500 VRMS Across Open Contacts: 1000 VRMS Pole to Pole: 1500 VRMS Contacts To Frame: 1500 VRMS Insulation Material: Molded polyester Insulation Resistance: 1 x 103 megohms min Environmental Characteristics Operating: −10°C to +50°C (AC), −10°C to +60°C (DC) Non−operating (storage): −30°C to +105°C Weight Std: 31/2 ozs (99.2 grams)—typical Hermetic sealed: 5 ozs (141.7 grams)—typical FAX (973) 748−6224 http://www.nteinc.com 17 D1 D2 1.53 (38.89) 2.32 (58.93) Max 2.03 (51.59) 2.825 (71.75) Max 1.34 (34.04) Max 1.40 (35.56) Max 1.69 (42.86) Note: Models with “N” suffix will have indicator lamp connected across coil. A (DPDT), 2 Form “C” 4 5 6 2 7 4 8 3 Note: R02−14A10−120H has Pin5 and Pin6 Reversed. NTE Electronics, Inc. Voice (973) 748−5089 7 1 11 Viewed from Pin end of Plug 6 2 10 1 5 3 9 2 8 C (SPDT), 1 Form “C” 7 4 Viewed from Pin end of Plug 18 6 5 3 1 B (3PDT), 3 Form “C” 8 Viewed from Pin end of Plug FAX (973) 748−6224 http://www.nteinc.com