Features #10−32 Combination Screw with .250” (6.35mm) QC Terminals Silver Cadmium Oxide Contacts UL 508 File No. E227250 Class NLDX2, NLDX8 RLY530 Series Contactors, Definite Purpose, 30 FLA, 1 Pole, 2 Pole and 3 Pole D86 D87 AC OPERATED Coils D88 Contacts Input Voltage Nom. Sealed Contact Arr. Max. Contact Cur. @ 600VAC Diag No. RLY530−1−24 24 VAC 5.0 VA SPST−NO 30A D86 RLY530−1−120 120 VAC 5.0 VA SPST−NO 30A D86 RLY530−1−240 240 VAC 5.0 VA SPST−NO 30A D86 RLY530−2−24 24 VAC 6.5 VA DPST−NO 30A D87 RLY530−2−120 120 VAC 6.5 VA DPST−NO 30A D87 RLY530−2−240 240 VAC 6.5 VA DPST−NO 30A D87 RLY530−3−24 24 VAC 6.0 VA 3PST−NO 30A D88 RLY530−3−120 120 VAC 6.0 VA 3PST−NO 30A D88 RLY530−3−240 240 VAC 6.0 VA 3PST−NO 30A D88 RLY530−3−480 480 VAC 6.0 VA 3PST−NO 30A D88 NTE Type No. Motor Rating in Amps Resistive Locked Rotor Number of Poles Full Load @ 600VAC @ 240VAC @ 480VAC @ 600VAC 1&2 30A 40A 150A 125A 100A 3 30A 40A 180A 150A 120A Initial Dielectric Strength Between Contact and Coil: 2200 VAC Between Poles: 2200 VAC (includes shunt) Between Open Contacts: 2200 VAC (no shunt) Insulation System: 130 C Class B Power Pole Terminations: #10−32 screw Wire Size: 16−8 (must use ring terminal) Recommended Tightening Torque: 22 in. lbs. Quick Connects Coil Terminals: Dual: .250” QC Power Terminals: 1 Pole: Quad .250” QC Power Terminals: 2 Pole: Quad .250” QC Power Terminals: 3 Pole: Dual .250” QC Coil Motor Horsepower Ratings Motor Type @ 120VAC @ 240VAC @ 240/277VAC @ 480VAC 1 1P 1 HP 2 HP − − 1 2P 2 HP 3 HP − − 1 3P 2 HP − 5 HP − 3 3P − − 10 HP 15 HP Operating: −40 C to +65 C NTE TYPE NO. DESCRIPTION Auxiliary Switch, 1 SPDT Snap Action Switch w/.250” QC Terminals RLY9190 Auxiliary Switch, 2 SPDT Snap Action Switches w/.250” QC Terminals RLY9191 Auxiliary Switch, 1 SPST−NO & 1 SPST−NC Switch w/.250” QC Terminals RLY9192 Auxiliary Switch, 1 SPST−NO & 1 SPST−NC Switch w/6−32 Screw Terminals RLY9193 Note 1. The above accessories are for use with 3−Pole contactors ONLY. Voice (973) 748−5089 Nom Coil Restsance 1 Pole: 18 (24V); 420 (120V); 1800 (240V) 2 Pole: 11 (24V); 237 (120V); 1000 (240V) 3 Pole: 7 (24V); 180 (120V); 720 (240V) Max. Pick−up Voltage: 75% of nominal or less, DC Min Drop−out Voltage: 6−15V (24V); 20−70V (120V); 40−140V (240V) Nom Inrush (60Hz): 28 VA (1 Pole); 30 VA (2 Pole); 60 VA (3 Pole) Max Coil Voltage: 30V (24V); 132V (120V); 264V (240V) Environmental Characteristics ACCESSORIES NTE Electronics, Inc. Electrical Specifications Weight 1 Pole: 8.0 ozs (226.8 grams)—typical 2 Pole: 9.6 ozs (272.2 grams)—typical 3 Pole: 1 lb. (453.6 grams)—typical Note It is not recommended to mount or operate contactors upside−down. FAX (973) 748−6224 http://www.nteinc.com 95 D86 (1 Pole) 1.626 (41.3) 2.315 (58.8) .217 (5.5) Dia (4 Places) 3.260 (82.9) 1.626 (41.3) 2.000 (50.8) 2.370 (60.1) 2.070 (52.5) NOTE: May contain removable dust cover. D87 (2 Pole) 1.626 (41.3) 2.315 (58.8) .217 (5.5) Dia (4 Places) 1.626 (41.3) 3.260 (82.9) 2.000 (50.8) 2.430 (61.7) 2.070 (52.7) NOTE: May contain removable dust cover. D88 (3 Pole) 2.370 (60.3) .455 (11.55) Dia 2.000 (50.8) 3.622 (92.0) 3.250 (82.6) .455 (11.55) .205 (5.2) NTE Electronics, Inc. .205 (5.2) Voice (973) 748−5089 2.980 (75.7) NOTE: May contain removable dust cover. FAX (973) 748−6224 http://www.nteinc.com 97