LGU-150C

Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
FEATURES:
Constant current output
Universal AC input: 90-305VAC
Active power factor correction
Short circuit, over voltage, over temperature protections
Designed to worldwide safety standards for lighting
Cooling by free air convection
5 year warranty
Model
Nominal
Input voltage
(Vac)
Output voltage
(Vdc)
Output current
(mA)
Min.
Output power
(W)
Max.
350
257
429
150
LGU150-C350
450
200
333
150
LGU150-C450
700
129
214
150
LGU150-C700
1050
86
143
150
LGU150-C1050
1400
64
107
150
LGU150-C1400
100-277
2100
43
71
150
LGU150-C2100
2800
32
54
151
LGU150-C2800
3150
29
48
151
LGU150-C3150
3500
26
43
150
LGU150-C3500
4200
22
36
151
LGU150-C4200
Note: 1. Add suffix for dimming option, “D” (0~10V), “P” (PWM), “T” (Timer);
2. Add suffix for package option, blank(default as "W" pacakge), “W” or “L”. See mechanical specifications.
ELECTRICAL
Input
Parameters
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
Input voltage
Vin
--
90
--
305
Vac
Input frequency
Fline
--
47
--
63
Hz
Input current
Iin
Full load, Vin = 230Vac
--
0.75
--
A
Inrush current
Iinrush
Cold start, Vin = 230Vac
--
65
--
A
Power factor
PF
70%~100% load, Vin = 230Vac
--
0.96
--
PF
η
Full voltage, full load
--
90
--
%
Efficiency
www.pairuigroup.com
Page: 1 / 6
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
ELECTRICAL
Output
Parameters
Output current accuracy
No load out voltage
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
--
--
--
5
--
%
LGU150-C350
--
--
469
V
LGU150-C450
--
--
365
V
LGU150-C700
--
--
235
V
LGU150-C1050
--
--
157
V
LGU150-C1400
--
--
117
V
LGU150-C2100
--
--
82
V
LGU150-C2800
--
--
61
V
LGU150-C3150
--
--
55
V
LGU150-C3500
--
--
50
V
LGU150-C4200
--
--
42
V
VNO-Load
Line regulation
Iout-line
Vin from 90Vac to 277Vac
--
--
1
%
Load regulation
Iout-load
Vout from min. to max.
--
--
3
%
Iover-shoot
Turning power on
--
--
10
%
Ton_delay
Cold start, power on
--
--
2
S
Iripple
--
--
5%Io
--
mAp-p
--
Vin =115Vac, output load≥50%
--
--
20
%
Output Current
overshoot
Turn-on delay time
Ripple
THD
Protection
Over voltage
115~150% rated output voltage. In latch mode, the power supply shall return to normal
operation only after the power is turned on again.
Short circuit
In hiccup mode, it will recover automatically after fault condition is removed.
Over temperature
Typ. 110
℃
Environment
Storage
Ambient operating
temperature
Maximum case
temperature
www.pairuigroup.com
Tstorage
Humidity: 5% RH to 95% RH
-40
--
+85
℃
Ta
Startup at rated voltage
-40
--
+70
℃
Tc
Hot-spot on case
--
--
+90
℃
Page: 2 / 6
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
ELECTRICAL
Environment
Parameters
Operating relative
humidity
MTBF
Symbols
Test Conditions / Comment
Min.
Typ.
Max.
Units
Ha
Non condensing
10
--
95
%
--
400
--
kHrs
TMTBF
Dimension(LxWxH)
Full load, 220Vac input,
℃
25
ambient temperature
W: 184.5 x 87.0 x 39.5mm/L: 188.5 x 78.5 x 37.0mm
Weight
W: 1000g/L: 850g
Safety / EMC
Safety standards
EMC
UL8750, UL935, UL1012, UL1310 CLASS 2, EN61347-1, EN61347-2-13
EN55015, FCC Part 15 Class B, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 6, 8, 11,
EN61547
Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25
Vin = 100Vac to 277Vac.
℃
and
MECHANICAL
PACKAGE TYPE “W”
Unit: mm
www.pairuigroup.com
Page: 3 / 6
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
MECHANICAL
PACKAGE TYPE “L”
Unit: mm
ELECTRICAL CURVE
DERATING CURVE
www.pairuigroup.com
STATIC CHARACTERISTIC CURVE
Page: 4 / 6
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
DIMMING FUNCTION
0~10V Dimming
External Resistor Dimming
ITEM
Conditions
Value
Maximum Voltage
Normally 10~11V
0~12V
0-10V Input Current
--
0~10mA
10V Output Voltage
Normally 11V
10~12V
10V Output Current
--
10mA Max.
Note: 1. To make the driver operate properly, the load voltage must be controlled above the minimum voltage
which
close to 50% of the maximum output voltage is from any given mode.
2. The dimming signal can be less than 1V. As it is for 0-1V ,the output current can maintain 10% of the rated output
current, but the connected LEDs may flicker. It's strongly recommended that keep dimming voltage bigger than 1V.
3. It is not allowed to connect the GND of dimming to the output, or the LED driver can not work as normal.
www.pairuigroup.com
Page: 5 / 6
Date: 07/18/2015
*Subject to change without prior notice.
Constant current LED Drivers
For outdoor use
LGU-150C Series, 150 Watt
DIMMING FUNCTION
PWM Dimming
ITEM
Conditions
Value
Input Voltage
--
1-10V
Input Current
--
10mA
PWM Frequency
--
0.5-3KHz
PWM Pulse Width
--
0~100%
Timer Dimming
Note: Above table for Timer dimming is just for reference, it can be adjusted according to the customer's requirements.
www.pairuigroup.com
Page: 6 / 6
Date: 07/18/2015
*Subject to change without prior notice.