OeA4207-26.00 M - Pletronics, Inc.

OeA4207-26.00M
TCVCXO Oscillator
November 2010
• Pletronics’ OeA4 is from the OeXO™ Series of
temperature compensated voltage controlled
crystal oscillator with a CMOS output.
• Tape and Reel packaging is available
• 5 x 7 mm LCC Ceramic Package
• Supply Voltage: 3.3V
Pletronics Inc. certifies this device is in accordance with the
RoHS (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.20 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D.1
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
-0.5V to +6.5V
Vi
Input Voltage
-0.5V to VCC + 0.5V
Vo
Output Voltage
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
1500
MIL-STD-883 Method 3115
Charged Device Model
1000
JESD 22-C101
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2010, Pletronics Inc.
OeA4207-26.00M
TCVCXO Oscillator
November 2010
Part Marking:
2600.yww
C PLExYWWz
2600
yww
PLE
X
YWW
Z
=
=
=
=
=
=
26.00MHz, the crystal frequency
Year and Week of the crystal manufacture
Pletronics
Model number, normally a “B”
Year and Week of assembly of the TCXO
internal factory code
The actual part number is OEA4207-26.00M where the model number “207” is the specification number
the part is made to. This is not included in the part marking. This is included on the label on the Tape and
Reel.
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
MIL-STD-883 Method 2002, Condition B
Vibration
MIL-STD-883 Method 2007, Condition A
Solderability
MIL-STD-883 Method 2003
Thermal Shock
MIL-STD-883 Method 1011, Condition A
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
The bar code will show the actual Part Number
OEA4207-26.00M
www.pletronics.com
425-776-1880
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
2
OeA4207-26.00M
TCVCXO Oscillator
November 2010
Electrical Specification for specified Vcc=3.30V ±5% over the specified
temperature range.
Item
Min
TYP
Max
Unit
Condition
Frequency Stability
over temperature
-50
-
50
ppb
Over 0oC to 70oC
Holdover
-50
-40
0
0
50
40
ppb
ppb
Over 0oC to 70oC for 24 hours
Over +
_5oC change for 24 hours
Frequency Calibration
-2.0
-
2.0
ppm
Frequency offset at 25oC,
60 minutes after reflow.
Supply voltage stability
-10
0
10
ppb
+
_ 2% variation in supply voltage
Load sensitivity
-5
-
5
ppb
10K ohm +
_10% || 15 pF +
_10%
Warm Up
-
0.4
3.0
S
Aging rate following reflow
-
±10
±3
±1
-
ppb/day
-1000
-1500
-4600
-
1000
1500
4600
ppb
after 1 year
after 5 years
after 15 years
Long term stability (Aging)
Output Waveform
at fixed supply voltage
+ load (reference to
midpoint min/max
frequency)
Time to reach specified frequency
1 day after reflow
7 days after reflow
30 days after reflow
CMOS
Output VHIGH
90
-
-
%Vs
Load: 10K ohm +
_10% || 15 pF +
_10%
Output VLOW
-
-
10
%Vs
TRISE and TFALL
-
-
4.0
nS
Vth: TR and TF 10% and 90% of amplitude
Vth: D.C. 50% of amplitude
40
50
60
%
-
-71
-93
-117
-138
-152
-155
-
-
-
0.6
pS
VCC
3.13
3.30
3.47
Volts
ICC
-
-
6.0
mA
0.5
-
2.50
Volts
1.50 volts nominal
Frequency Pullability
5
-
10
±ppm
Slope positive
Linearity
-
0.05
2.0
%
In accordance with MIL-PRF-55310
+70
o
Widest range allowed
Duty Cycle
Phase Noise
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
Jitter
V Supply Range
Supply Current
1
Vcontrol Range
Operating Temperature
0
-
at 25oC
dBc/Hz
C
Frequency offset from carrier 12kHz to 20MHz
o
Storage Temperature
-55
+95
C
1
Note
For correct operation a 10nF supply de-coupling capacitor should be placed next to the device.
www.pletronics.com
425-776-1880
3
OeA4207-26.00M
TCVCXO Oscillator
November 2010
Mechanical:
4
3
1
2
3
4
2
1
Not to Scale
Pad
1
2
Inches
mm
A
0.276 +
_0.006
7.00 +
_0.15
Function
Note
B
0.197 +
_0.006
5.00 +
_0.15
Vcontrol Input
EFC, Electronic Frequency Control.
C
0.099 max
2.50 max
D1
0.039
1.00
E1
0.197
5.00
1
0.025
0.90
G1
0.118
3.00
H1
0.020
0.50
J1
0.051
1.30
K1
0.154
3.90
Ground (GND)
3
Output
4
Supply Voltage
(VCC)
F
Recommend connecting appropriate power
supply bypass capacitors as close as
possible.
1
Contacts:
Typical dimensions
Gold 11.8 to 39.4 µinches (0.3 to1.0 µm) over
Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Layout and application information
There are additional pads on the package bottom, these are not to be connected to any traces on the
PCB, solder masking on the PCB should be used to make sure no contact is made.
For Optimum Stability and Jitter Performance, Pletronics
recommends:
•
a ground plane under the device
•
no large transient signals (both current and voltage) should be routed under the device
•
do not layout near a large magnetic field such as a high frequency switching power supply
•
minimize air flow across the device
www.pletronics.com
425-776-1880
4
OeA4207-26.00M
TCVCXO Oscillator
November 2010
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
Temperature (°C)
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
Tape
Size
D0
8mm
D1
Min
E1
P0
1.0
S1
Min
T
Max
0.6
0.6
T1
Max
2.0
+0.05
_
12mm
1.5
1.5
1.75
4.0
16mm
+0.1
-0.0
1.5
_
+0.1
_0.1
+
24mm
P2
0.1
2.0
_
+0.1
1.5
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
14.25
7.5 _
+0.1
8.0 +
_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
7.0
26.0
13.0
mm
177.8
254.0
330.2
inches
2.50
4.00
3.75
mm
63.5
101.6
95.3
Tape
Width
16.4
+2.0
-0.0
16.0
C
mm
D
mm
13.0 +0.5 / -0.2
16.4
+2.0
-0.0
16.4
+2.0
-0.0
Reel dimensions may vary
from the above
www.pletronics.com
425-776-1880
5
OeA4207-26.00M
TCVCXO Oscillator
November 2010
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: [email protected]
URL: www.pletronics.com
Copyright © 2010, Pletronics Inc.
www.pletronics.com
425-776-1880
6