PM50 FEATURES • • • • • • • Very wide input voltage range Reverse input voltage protection Din rail or wall mounting High efficiency EMI/RFI EN55022-B Low ripple outputs Operating temperature -25 to 55 OC SPECIFICATIONS SELECTION TABLE INPUT MODEL NUMBER Input voltage 12V, 24V, 36V, 48V, 110V, 220V See table for details Reverse polarity protection Yes OUTPUT SPECIFICATIONS Output voltage See table Voltage adjustment 60V ±10%; 24V ±10%; 15V, (12-16V) Output current See table Ripple & noise <2mV rms Load regulation 0.2% Line regulation 0.2% Temperature coefficient 0.02% per °C Overcurrent protection Yes Transient response 3mS typical, 10%–90% load step OPERATING Efficiency 78%–85% Switching frequency 45kHz Safety isolation For 10-30V, 20-60V inputs and below: Input – Output: 2000VDC Input-Case:2000VDC Output – Case: 1000VDC For 60V input and above: Input – Output: 2500VAC Input-Case: 2500VDC Output – Case: 1000VDC ENVIRONMENTAL Operating temperature -25°C to 55°C 100% load Storage temperature Can be used in non-condensing tropic -40°C to 85°C Yes STANDARDS AND APPROVALS INPUT OUTPUT POWER PM50A 15-15 10-30V 12V 2.67A 32W PM50A 15-15 10-30V 15V 2.67A 40W PM50A 18-18 10-30V 18V 2.60A 47W PM50A 15-15 10-30V 24V 1.34A 32W PM50A 15-15 10-30V 28V 1.34A 37W PM50A 18-18 10-30V 36V 1.30A 47W PM50A 60-60 10-30V 60V 0.67A 40W PM50A 60-60 10-30V 110V 0.34A 37W PM50B 15-15 20-60V 12V 3.34A 40W PM50B 15-15 20-60V 15V 3.34A 50W PM50B 18-18 20-60V 18V 3.20A 57W PM50B 15-15 20-60V 24V 1.67A 40W PM50B 15-15 20-60V 28V 1.67A 47W PM50B 18-18 20-60V 36V 1.60A 57W PM50B 60-60 20-60V 60V 0.84A 50W PM50B 60-60 20-60V 110V 0.42A 46W PM50C 15-15 50-150V 12V 3.34A 40W PM50C 15-15 50-150V 15V 3.34A 50W PM50C 18-18 50-150V 18V 2.78A 50W PM50C 15-15 50-150V 24V 1.67A 40W PM50C 15-15 50-150V 28V 1.67A 47W PM50C 18-18 50-150V 36V 1.39A 50W PM50C 60-60 50-150V 60V 0.84A 50W PM50C 60-60 50-150V 110V 0.42A 46W PM50D 15-15 90-270V 12V 3.34A 40W PM50D 15-15 90-270V 15V 3.34A 50W PM50D 15-15 90-270V 24V 1.67A 40W Safety standards IEC60950, EN/IEC61204-3 PM50D 15-15 90-270V 28V 1.67A 47W C-Tick EMC standards AS/NZS CISPR11 Group 1, Class A EN/IEC61000-4-4 4KV EN/IEC61000-4-5 Level 2 and 3 PM50D 60-60 90-270V 60V 0.84A 50W PM50D 60-60 90-270V 110V 0.42A 46W EMI standards EN55011/EN55023 Level B Models conists of 2 isolated outputs 12V, 15V and 60V for connection in series or parallel. DC-DC CONVERTERS 3 2 - 5 0 W AT T S D C / D C S I N G L E - D U A L MECHANICAL SPECIFICATIONS Dimensions 157x106x48mm Weight 0.65kg Doc. No. PBC9 Rev.C 28-4-11 NOTE For dual output models, please consult Powerbox for model number and details. Powering Progress – www.powerbox.com.au 117