DC-DC CONVERTERS PM80 6 0 - 8 0 W AT T S D C / D C S I N G L E - D U A L FEATURES • • • • • • • Very wide input voltage range Reverse input voltage protection Din rail mounting High efficiency EMI/RFI EN55022-B Low ripple output Operating temperature -25 to +55 OC SPECIFICATIONS INPUT Input voltage MECHANICAL SPECIFICATIONS 12V, 24V, 36V, 48V, 110V, 220V See table for details Dimensions 157x106x48mm Weight 0.65kg Reverse polarity protection Yes OUTPUT SPECIFICATIONS SELECTION TABLE Output voltage See table Voltage adjustment 60V ±10%; 24V ±10%; 15V, 12-16V Output current See table PM80 24/24-24 18-32V 24V 2.50A 60W Ripple & noise <2mV rms PM80 24/36-36 18-32V 36V 1.68A 60W Load regulation 0.2% PM80 24/24-24 18-32V 48V 1.25A 60W Line regulation 0.2% PM80 24/36-36 18-32V 72V 0.84A 60W Temperature coefficient 0.02% per °C PM80 48/24-24 40-60V 24V 3.34A 80W Overcurrent protection Yes PM80 48/36-36 40-60V 36V 2.24A 80W Transient response 3mS typical, 10%–90% load step PM80 48/24-24 40-60V 48V 1.67A 80W OPERATING MODEL NUMBER INPUT OUTPUT1 OUTPUT2 POWER PM80 48/36-36 40-60V 72V 1.12A 80W Efficiency 78%–85% PM80 110/24-24 88-150V 24V 3.34A 80W Switching frequency 45kHz PM80 110/36-36 88-150V 36V 2.24A 80W Safety isolation For 24V, 48V inputs and below: Input – Output: 2000VDC Input - Case: 2000VDC Output – Case: 1000VDC For 60V input and above: Input – Output: 2500VAC Input - Case:2500VDC Output – Case: 1000VDC PM80 110/24-24 88-150V 48V 1.67A 80W PM80 110/36-36 88-150V 72V 1.12A 80W PM80 220/24-24 175-300V 24V 3.34A 80W PM80 220/36-36 175-300V 36V 2.24A 80W PM80 220/24-24 175-300V 48V 1.67A 80W PM80 220/36-36 175-300V 72V 1.12A 80W PM80 24/24-24 18-32V 24V 1.25A 24V 1.25A 80W PM80 24/36-36 18-32V 36V 0.84A 36V 0.84A 80W PM80 48/24-24 40-60V 24V 1.67A 24V 1.67A 80W PM80 48/36-36 40-60V 36V 1.12A 36V 1.12A 80W PM80 110/24-24 88-150V 24V 1.67A 24V 1.67A 80W ENVIRONMENTAL Operating temperature -25°C to 55°C 100% Load Storage temperature Can be used in non-condensing tropic -40°C to 85°C Yes STANDARDS AND APPROVALS Safety standards C-Tick EMC standards EMI standards IEC60950, EN/IEC61204-3 PM80 110/36-36 88-150V 36V 1.12A 36V 1.12A 80W AS/NZS CISPR11 Group 1, Class A EN/IEC61000-4-4, 4KV EN/IEC61000-4-5 Level 2 and 3 EN55011/EN55022 Level B PM80 220/24-24 175-300V 24V 1.67A 24V 1.67A 80W PM80 220/36-36 175-300V 36V 1.12A 36V 1.12A 80W Models conists of 2 isolated outputs 24V and 36V for connection in series or parallel. NOTE: For dual output models, please consult Powerbox for model number and details. 118 DOC. NO. PBC9 REV.C 28-4-11 PM80 TECHNICAL ILLUSTRATION Doc. No. PBC9 Rev.C 28-4-11 Powering Progress – www.powerbox.com.au DC-DC CONVERTERS 6 0 - 8 0 W AT T S D C / D C S I N G L E - D U A L 119