PBI3H Series FEATURES • • • • • • Light weight, compact size Din Rail Mountable High efficiency, high reliability Input under voltage protection Over current, over voltage, thermal protection UL, cUL, CE SPECIFICATIONS OPERATING INPUT Input voltage Inrush current 12VDC (9.6-16) 24VDC (19~32) 48VDC (38~63) 110VDC (85~140) 12VDC (6.18A - 8.26A) 24VDC (3.3A - 5.4A) 48VDC (1.65A -2.64A) 110VDC (0.725A - 1.16A) Efficiency (typical) *1 89% - 94% Switching Frequency 125kHz fix 3.3Vdc - 24Vdc Output Current 22.0A - 5.0A Current Limitting Over voltage Protection Input Voltage Protection Latch Type (output shutdown) Output shutdown when input voltage remains under the input range for 3 seconds (typ.) Thermal Protection Output shutdown when input voltage remains under the input range for 3 seconds (typ.) ENVIRONMENTAL OUTPUT Output voltage Over current Protection *6 Voltage adjustment ±10% of Rated Output Voltage Ripple & noise(max.) *2 150mV - 350mV Line regulation 26mV - 190mV Load regulation 30mV - 216mV Temperature coefficient *3 0.03 % / °C Drift *4 32mV - 135mV Dynamic Load Regulation *5 ±150mV - ±720mV Recovery Time *5 20mS Rise Time 200mS(500mS for NVDxSD Series)(maximum) at 25C and rated input/output Operating temperature -10 to 71°C Temperature derating 3.5%/C(50C to 71C) Operating Humidity 20-80%/RH (non-condensing) Storage temperature -20 to +85°C Humidity 20 to 90%/RH Withstanding Voltage Primary-Secondary AC2,000V at 10mA for 1minute/Primary-Frame Ground AC2,000V at 10mA for 1minute/Secondary-Frame Ground AC1,000V at 10mA for 1minute Isolation Resistance Primary-Secondary-Frame Ground 50M ohm(minimum) by DC500V insulation tester Vibration 5-10Hz:10mm double amplitude,1055Hz:19.6m/s2,20minutes' period for 30minutes each along X,Y,Z axes(nonoperating) Shock 196m/s2 DC-DC SWITCHING POWER SUPPLY 1 0 0 W A T T S D C / D C S W I T C H I N G P O W E R S U P P LY STANDARDS AND APPROVALS NOTE: *1 at DC 12, 24, 48, 110V and rated output Safety *2 measured by a bayonet probe at the output connector at a 0 to 100MHz bandwidth UL60950,C-UL(CSA60950),CE MECHANICAL Dimension [mm] 65(W)x101(D)x34(H) mm(Not include output terminal) Weight 250g *3 at -10 to +71C *4 for 7hour period after 1hour warm-up at 25C and rated input/output *5 when output current changed between 25% and 75% of rated output current rapidly at rated input *6 Latch timer type (for 110V input models). Output turns to hiccup mode when output drops after over-load ) Doc. No. PBC9 Rev.D 11-12-13 Powering Progress – www.powerbox.com.au 93 PBI3H Series DC-DC SWITHING POWER SUPPLY 1 0 0 W A T T S D C / D C S W I T C H I N G P O W E R S U P P LY 94 SELECTION TABLE 12 VOLT MODEL NO INPUT OUTPUT VOLTAGE OUTPUT CURRENT 48 VOLT MODEL N0 INPUT OUTPUT VOLTAGE OUTPUT CURRENT PBI3H-1205M-U1 9.6-16V 5Vdc 18.0A PBI3H-4805M-U1 38-63V 5Vdc 20.0A PBI3H-1212M-U1 9.6-16V 12V 7.5A PBI3H-4812M-U1 38-63V 12V 9.0A PBI3H-1215M-U1 9.6-16V 15V 6.0A PBI3H-4815M-U1 38-63V 15V 7.0A PBI3H-1224M-U1 9.6-16V 24V 3.8A PBI3H-4824M-U1 38-63V 24V 5.0A 24 VOLT MODEL NO INPUT OUTPUT VOLTAGE OUTPUT CURRENT 110V MODEL NO INPUT OUTPUT VOLTAGE OUTPUT CURRENT PBI3H-2405M-U1 19-32V 5Vdc 20.0A PBI3H-11005M-U1 85-140V 5Vdc 20.0A PBI3H-2412M-U1 19-32V 12V 9.0A PBI3H-11012M-U1 85-140V 12V 9.0A PBI3H-2415M-U1 19-32V 15V 7.0A PBI3H-11015M-U1 85-140V 15V 7.0A PBI3H-2424M-U1 19-32V 24V 5.0A PBI3H-11024M-U1 85-140V 24V 5.0A TECHNICAL ILLUSTRATIONS DOC. NO. PBC9 REV.D 11-12-13