BATTERY CHARGER & SYSTEMS EFOY Pro Fuel F U E L C E L L G E N E R AT O R S FEATURES • • • • • • • 100% reliability and operational safety Long periods of autonomy, maintenance-free Remote monitoring Lightweight and compact Quiet and emission-free Operation in conjunction with Solar PV Mobile applications EFOY Pro 800 EFOY PRO 800 DUO EFOY PRO 2400 EFOY PRO 2400 DUO Max. nominal power 45 W 45 W 110 W 110 W Min. nominal power 1 25 W 25 W 80 W 80 W 12 V dc / 24 V dc 12 V dc / 24 V dc 12 V dc / 24 V dc 12 V dc / 24 V dc 3.75 A / 1.88 A 2.1 A / 1.05 A 3.75 A / 1.88 A 2.1 A / 1.05 A 9.17 A / 4.58 A 6.7 A / 3.3 A 9.17 A / 4.58 A 6.7 A / 3.3 A 40 to 160 AH 10 to 100 AH 40 to 160 AH 10 to 100 AH 60 to 350 AH 30 to 175 AH 60 to 350 AH 30 to 175 AH 8.0 kg 8.3 kg 9.0 kg 9.3 kg 24 Month / 4.500 hours 24 Month / 4.500 hours 24 Month / 4.500 hours 24 Month / 4.500 hours 1 (2) 2 (4) 1 (2) 2 (4) FUEL CELLS Nominal volt Charging current at 12 V / 24 V max.: min.: Recommended battery capacity2 at 12 V (Lead acid, gel and AGM) at 24 V Weight Warranty3 Connectable cartridges (with DCS1) Length fuel cartridge connector Switching threshold for automatic battery charging at 12 V / 24 V4 70 cm On: <12,3 V / <24,6 V Off: >14,2 V / >28,4 V Required start-up voltage at 12 V /24 V >9 V / >18,5 V Maximum battery voltage <16 V / <32 V Noise level (at 1m / 7m distance) Nominal consumption5 Quiescent current draw at 12 V 42 dB(A) / 25 dB(A) 0,9 l/kWh 20 mA Operating temperature -20 °C to +50 °C Start-up temperature +3 °C to +50 °C Storing temperature Recommended altitude4 Dimensions L x W x H International Protection (IP-Class) Inclination along the roll axis Inclination along the lateral axis +1 °C to +50 °C Standard: ≤1500 (up to 2000m) 433 x 188 x 278 mm IP 21 Permanent: max. 35°; temporary (<10 min): max. 45° Permanent: max. 20° User-Interface At the unit or via Operating Panel OP2 with text display Data-Interface RJ-45 plug for accessories (e.g. Interface adapter) Electrical Interface MNL-plug 4-pins (e.g. Tyco Electronics Universal Mate-N-Lok – Nr. 350779) Certificates 15 Doc. No. PBRC Rev.F 4-6-2013 EFOY Pro Fuel ACCESSORIES 6 Dimensions L x W x H DuoCartSwitch DCS1 174 x 119 x 96 mm Weight 0.7 kg International Protection (IP-Class) IP 20 Quiescent current draw 7.5 mA Dimensions L x W x H GSM modem GSM-2-SMS 72 x 32 x 65 mm Weight 0.5 kg / 1.1 lbs Input Voltage 8 – 30 V dc Max. peak current 3.2 A Average current draw (Quiescent / SMS / GPRS) 30 / 100 / 100 mA Fuel cartridge sensor FS1 Dimensions L x W x H 50 x 20 x 5 mm Interface adapter IA1 Dimensions L x W x H 60 x 33 x 16 mm Cluster controller CC1 Dimensions L x W x H 149 x 77 x 270 mm Weight 0.16 kg Dimensions L x W x H M28 adapter FUEL CARTRIDGES 70 x 70 x 61 mm M5 M10 M28 (ONLY WITH M28-ADAPTER) Volume 5 litre 10 litre 28 litre Weight 4.3 kg 8.4 kg 22 kg Nominal capacity Dimensions L x W x H 5.5 kWh 190 x 145 x 283 mm 11.1 kWh 230 x 193 x 318 mm 31.1 kWh 370 x 285 x 395 mm with M28 Adapter: 370 x 285 x 425 mm BATTERY CHARGER & SYSTEMS F U E L C E L L G E N E R AT O R S STANDARD EQUIPMENT Operating panel OP2 with cable - Display for view values and settings - Surface mount frame - Operating panel with black frame Mounting plate for EFOY Pro For secure mounting of the EFOY Pro Charge line for battery connection - Connecting line to fuel cell (1 m) - Cable with fuse 2A Sense - Cable with fuse 15A Power Fuel Catridge holder with belet For safe transport of the M5 or M10 fuel cartridge in the vehicle these are fastened using a cartridge holder and a belt. For mounting the cartridge holder in the vehicle you will need four screws and, if necessary, appropriate anchors. Exhaust hose During operation the device will produce water vapour and carbon dioxide. These are led to the outside by means of the exhaust hose. The insulation prevents water from freezing. Length: 1.2M. Off heat duct During operation the EFOY Pro generates off heat. The off heat duct is used to conduct this off heat to the outside. - Off heat flange - Off heat blow - Off heat tube - External face plate - Lense head screws M4 and 10 (4 screws) 1 2 3 4 5 6 Nominal power varies by ±10 %, decreases with the operation hours. Specification valid within warranty period. Depends on battery type and application - bigger batteries possible, if additional energy source available (e.g. solar) Regional warranty conditions for EFOY Pro fuel cells apply. Factory Setting - can be modified with Interface Adapter and PC or operating panel OP2. Effective consumption depends on operating conditions. All EFOY Pro accessories are for operating in following temperature ranges: -20 °C to +50 °C Doc. No. PBRC Rev.F 4-6-2013 Powering Progress – www.powerbox.com.au 16 BATTERY CHARGER & SYSTEMS EFOY Pro Fuel F U E L C E L L G E N E R AT O R S TECHNICAL ILLUSTRATIONS EFOY Pro Fuel Cell Remote Control 17 Doc. No. PBRC Rev.F 4-6-2013 EFOY Pro Fuel Off Heat Set BATTERY CHARGER & SYSTEMS F U E L C E L L G E N E R AT O R S Mounting Plate Doc. No. PBRC Rev.F 4-6-2013 Powering Progress – www.powerbox.com.au 18 BATTERY CHARGER & SYSTEMS EFOY Pro Fuel F U E L C E L L G E N E R AT O R S Fuel Cartridge Holder Fuel Cartridge Sensor FS1 19 Doc. No. PBRC Rev.F 4-6-2013 EFOY Pro Fuel Doc. No. PBRC Rev.F 4-6-2013 Powering Progress – www.powerbox.com.au BATTERY CHARGER & SYSTEMS F U E L C E L L G E N E R AT O R S 20