1U Micro Compact System 8 0 0 W - 2 4 0 0 W AT T S T E L E C O M R E C T I F I E R S Y S T E M S FEATURES • • • • • • • • • 800W - 2400W Configurable Battery Charging System 1U 19" Rack Mounting Network Monitoring N+1 Operation System Monitoring Load & Battery MCBs Battery LVD Customized shelf configurations available Fully Featured Telecom Grade Rectifier SPECIFICATIONS MONITORING & CONTROL INPUT AC input 240V AC (90-300V) Single phase Frequency range 45-66 Hz Power factor >0.99 full load Termination Termination Single phase, 6 or 10mm² L, N, E tunnel terminals Display Communications DC OUTPUT Nominal voltage -48V Rated system 2400W @ -48V output power Polarity Audible 90dBA buzzer mappable to user defined conditions Controls 3x push buttons for parameter setting or viewing on front panel Signal Inputs Serial bus for rectifier control and interface to peripheral modules 6x digital inputs 2x temperature sensors (one fitted by default) Positive earth, (negative earth option available)* DC DISTRIBUTION Load Standard Shelf configuration. (Customized configuration available)* Battery Standard Shelf configuration (Customized configuration available)* Breaker fail detection Electronic fail detection on both load and batterybreakers Load Battery Tunnel terminals 10 mm² Low voltage 50A battery LVD (magnetically latching) fitted as standard disconnect ENVIRONMENTAL REQUIREMENTS Ambient Temperature -20ºC to +70ºC Storage Temperature -30ºC to +85ºC Humidity 5-95% RH (non-condensing) Altitude <2,500m at full power 6x alarm relays, 5x of which can be mapped for customised alarm settings Alarm Contacts 0.3A 100V volts free changeover contacts Periodic log, 16,384 records (dependant on number of parameters logged) Logging Capacity Event log, 16,384 records (dependant on number of parameters logged) Relay outputs, mini combicon to accept 1.5mm² Connections wire USB port, USB mini B *TCP/IP and modbus options only available with SM36 supervisory module. Alarms CONFIGURATION AND OPTIONS Rectifiers MECHANICAL Dimensions W, H, D 482.6mm (standard 19" module), 44.45mm (1U), 285mm Weight 5kg (excluding rectifier modules) Shipping Dimensions W, H, D 540.0mm, 95.0mm, 400.0mm Shipping Weight LED Indicators Multi-lingual alpha numeric backlit display Serial: 1x USB port on front panel for local PC interface TCP/IP: Ethernet interface for communication using SNMP protocol and internal web based configurator* Modbus: Supported via TCP/IP* Green: Power on/monitor OK Yellow: Non urgent alarm Red: Urgent alarm Supervisory Modules 6.0kg (excluding rectifier modules) ACA-BC08P2 ARBP-0M RM648: 600W modular rectifier, 110/230V AC input, 48V DC output, 12.5A maximum output current RM848: 800W modular rectifier, 230V AC input, 48V DC output, 16.6A maximum output current SM35: standard monitor featuring full temperature compensation, automated and manual battery testing/equalisation SM36: enhanced monitor featuring full temperature compensation, automated and manual battery testing/equalisation with TCP/IP 2m, 8mm² Ø battery cable kit (other lengths available to special order) Metal rectifier blanking pane 1U Micro Compact System 8 0 0 W - 2 4 0 0 W AT T S T E L E C O M R E C T I F I E R S Y S T E M S TECHNICAL ILLUSTRATIONS MODEL NUMBER MAX RECTIFIERS MAX SHELF POWER DC DISTRIBUTION 6 x load circuit breakers (6-30A) 2 x battery circuit breakers (max 30A) 80A magnetically latching battery LVD 4 x load circuit breakers (6-30A) 48VDC 2.4kW PSX24 V2 3 2 x battery circuit breakers (max 30A) Positive earth 80A magnetically latching battery LVD 6 x load GMT fuses (1-15A) 48VDC 2.4kW PSX24 V3 3 2 x battery GMT fuses (2 x parallel pairs, 1-30A) Positive earth 80A magnetically latching battery LVD *System part numbers are dependent on configuration options. For final system part numbers consult our sales staff for configuration advice. PSX16 V2 2 48VDC 1.6kW Positive earth TECHNICAL ILLUSTRATIONS Powering Progress – www.powerbox.com.au