DC-AC INVERTER UNIT - Power

DC-AC INVERTER UNIT
PS-DA0130-01(S) (4 W SINGLE OUTPUT)
(PRELIMINARY INFORMATION)
DESCRIPTION :
This low profile DC to AC Inverter is developed for single lamps.
INPUT VOLTAGE:
12 Vdc
APPLICABLE LCD:
3.6 to 10 inches single lamp type
Lamp Voltage 800 Vrms
Lamp Current 5.0 mArms
Lamp Start Up Voltage 1.200 Vrms (Vin : 12 Vdc)
FEATURES :
Remote ON/OFF
Current Feedback Circuit
High Efficiency
Low noise with voltage resonant circuit
Fuse Protection
Ext. PWM Dimming or Voltage Dimming
Wide Input Voltage Range
This inverter used follow outputs connectors, SM02(8.0)B-BHS-1-TB,
SM02B-BHSS-1-TB, HV-2P-H
RoHS compliant (S)
TEMPERATURE & HUMIDITY :
Operating Temperature Range
Storage Temperature Range
Humidity
HV-2P-H (JAE)
87 x 16.5 x 7 mm
SM02B-BHSS-1-TB (JST)
LxWxH
SM02(8.=0)B-BHS-1-TB (JST)
DIMENSIONS :
0°C ~ +50°C
-20°C ~ +85°C
95 %RH max
Unit : mm
Weight :23 (g) typ.
Note: Please use plastic screw in case of a non-insulating mounting base!
ORDER KEY :
With order of this Inverter please give the following key.
-1: for SM02(8.0)B-BHS-1-TB (JST)
-2: for SM02B-BHSS-1-TB (JST)
-3: for HV-2P-H (JAE)
For example PS-DA0130-01-1 (S)
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
Info@Power-Systems.de
All specifications are subject to change without notice.
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. :
+ 49 / 70 62 / 67 59 - 6
Fax:
+ 49 / 70 62 / 67 59 - 800
Page (1)
Version 1.1,2 3rd February 2012
DC-AC INVERTER UNIT
PS-DA0130-01(S) (4 W SINGLE OUTPUT)
(PRELIMINARY INFORMATION)
Components
No.
1
2
Part Description
PCB
Connector CN1
Qty.
1
1
3
Connector CN2
1
Material
UL94V-0 (FR-4 or CEM-3)
53261-0590
SM02(8.0)B-BHS-1-TB
SM02B-BHSS-TB
HV-2P-H
Output side CN2 (SM02(8.0)B-BHS-1-TB)
Input side CN1:
Pin No.
CN1-1
CN 1-2
CN 1-3
CN 1-4
CN 1-5
Note
t=1mm
Molex or equal
JST or equal
JST or equal
JAE or equal
Symbols
Ratings
Vin
5.0 ~ 12.0 Vdc
GND
Vrmt
0 ~ 1.0 = OFF / 2.0 ~ Vin = ON
Vbr
0 ~ 3.0 Vdc
Ext. PWM
Vbr
(200~500Hz Low active)
Pin No.
CN 2-1
Symbols
Vhigh
Ratings
800 Vrms (5.0 mArms)
CN 2-2
Vlow
(GND)
Output side CN2 (SM02B-BHSS-1-TB)
Pin No.
CN 2-1
Symbols
Vhigh
Ratings
800 Vrms (5.0 mArms)
CN 2-2
Vlow
(GND)
Output side CN2 (HV-2P-H)
Pin No.
CN 2-1
Symbols
Vhigh
Ratings
800 Vrms (5.0 mArms)
CN 2-2
Vlow
(GND)
ELECTRICAL CHARACTERISTICS :
Conditions
Parameters
Symbols
Output Current
Output Current
Input Current
Frequency
Open Circuit Voltage
Iout
Iout
Iin
F
Vopen
Note 1 :
Note 2 :
Vin (V)
5~12
5~12
5~12
5~12
5~12
Specification
Vbr (V) Tu (°C)
0.0
3.0
0.0
0.0
0.0
0 ~ +50
0 ~ +50
0 ~ +50
0 ~ +50
0 ~ +50
Min.
Typ.
Max.
4.1
1.5
44
900
5.0
2.0
50
1.200
5.9
2.5
0.8
56
1.700
Unit
Note
mArms
mArms
Adc
kHz
Vrms
Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked
on mechanical drawing and any conductors.
The external PWM frequency should be in a range of 100 ~ 500 Hz. For other frequency please request.
the optimum is normally at 250 Hz, minimized the interference disturbances of the vertical sync.
frequency.
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
Info@Power-Systems.de
All specifications are subject to change without notice.
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. :
+ 49 / 70 62 / 67 59 - 6
Fax:
+ 49 / 70 62 / 67 59 - 800
Page (2)
Version 1.1,2 3rd February 2012
DC-AC INVERTER UNIT
PS-DA0130-01(S) (4 W SINGLE OUTPUT)
(PRELIMINARY INFORMATION)
TEST CIRCUIT :
F
Vin
5.0 ~ 12.0 Vdc
V
~
Vopen
Iin
A
1000:1
PROBE
F
CN1-1
SW3
V
CN2-1
SW 1
Operation of unit
a
Operation
b
Non operation
CN1-2
T1
a
Vrmt
1.0 / 2.0 Vdc
CL1
RL1
CN1-3
V
b
SW1
A
~
CN1-4
Vbr
0 ~ 3 Vdc
Iout1
SW4
CN2-2
CN1-5
Ext. PWM*
0/5V
*) Only active when Vrmt is 0 Vdc or floating
Power Systems – The Power Solution
Web:
Email:
www.Power-Systems.de
Info@Power-Systems.de
All specifications are subject to change without notice.
Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany
Tel. :
+ 49 / 70 62 / 67 59 - 6
Fax:
+ 49 / 70 62 / 67 59 - 800
Page (3)
Version 1.1,2 3rd February 2012