DC-AC INVERTER UNIT PS-DA0605-02(S) (28 W SIXFOLD OUTPUTS) (PRELIMINARY INFORMATION) DESCRIPTION : This low profile DC to AC Inverter is developed for sixfold lamps. APPLICABLE LCD: 15 to 23 inches sixfold lamp type Lamp Voltage 800 Vrms Lamp Current 6 x 6.0 mArms Lamp Start Up Voltage 2.200 Vrms (Vin : 12 Vdc) FEATURES : Remote ON/OFF Wide Dimming Range Dimming with Ext.-PWM and / or Current Dimming CCFL – Pairs Switchable RoHS compliant (S) TEMPERATURE & HUMIDITY : Operating Temperature Range Storage Temperature Range Humidity DIMENSIONS : LxWxH -10°C ~ +60°C -20°C ~ +85°C 95 %RH max 200 x 85 x 12 mm Pin 1 of CN8 Pin 1 of CN1 Pin 1 Pin 1 Pin 1 of CN1 Pin 1 Pin 1 of CN8 Pin 1 Pin 1 Pin 1 Unit : mm Weight :64 (g) typ. Note: Please use plastic screw in case of a non-insulating mounting base! Components No. 1 2 3 4 Part Description PCB Connector CN1 Connector CN8 Connector CN2 ~ CN7 Qty. 1 1 1 6 Material UL94V-0 (FR-4 or CEM-3) S8B-PH-SM3-TB S4B-PH-SM3-TB SM02(8.0)B-BHS-1-TB Note t=1.6m m JST or equal JST or equal JST or equal Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (1) Version 1.0.6, 08th September 2010 DC-AC INVERTER UNIT PS-DA0605-02(S) (28 W SIXFOLD OUTPUTS) (PRELIMINARY INFORMATION) Output side CN2 ~ CN7 Pin No. Symbols Vhigh CN 2-1 N.C. CN 2-2 Vlow CN 2-3 Input side CN1: Pin No. Symbols Ratings Vin 10.8 ~ 13.2 Vdc CN 1-1+2+3 GND CN 1-4+5+6 Vbr 0 ~ 5 Vdc CN 1-7 Vrm t 0 ~ 1.5 = OFF / 2.5 ~ 5.5 = ON CN 1-8 Ratings 800 Vrm s (6.0 m Arm s ) (GND) Input side CN8 Pin No. Symbols Ratings Vlam p1 0 ~ 1.5 = OFF / 2.5 ~ 5.0 = ON CN 8-1 Vlam p2 0 ~ 1.5 = OFF / 2.5 ~ 5.0 = ON CN 8-2 Vadj 0 ~ 3 Vdc CN 8-3 GND CN 8-4 ELECTRICAL CHARACTERISTICS : Conditions Parameters Symbols Output Current Output Current Input Current Frequency Open Circuit Voltage No load Shutdown Iout Iout Iin F Vopen Ts d Note 1 : Note 2: Note 3: Note 4: Vin (V) Vbr (V) 12±1.2 12±0.6 12±1.2 12±1.2 11.4 12±1.2 0.0 5.0 0.0 0.0 0.0 0.0 Specification Tu (°C) -10 -10 -10 -10 -10 -10 ~ +60 ~ +60 ~ +60 ~ +60 ~ +60 ~ +60 Min. Typ. Max. 5.5 50 2.000 1.0 6.0 18 2.3 53 2.200 - 6.5 3.0 57 2.400 - Unit Note m Arm s % Adc kHz Vrm s s ec wit hout load Please keep minimum of 2mm clearance (all directions) between inverter high voltage area as marked on mechanical drawing and any conductors. Vadj = 0V or open, Output Current Max. and Vadj = 3V then Output Current = 3.5 ~ 4.5 mA Please request fpr other CCFL current. Before apply any control signal into inverter, please provide Vcc first. Please follow the reversed sequence during power off. Power off control signal first, then power off Vcc. Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (2) Version 1.0.6, 08th September 2010 DC-AC INVERTER UNIT PS-DA0605-02(S) (28 W SIXFOLD OUTPUTS) (PRELIMINARY INFORMATION) TEST CIRCUIT : Power Systems – The Power Solution Web: Email: www.Power-Systems.de [email protected] All specifications are subject to change without notice. Address: Hauptstr. 48 ; 74360 Ilsfeld-Auenstein / Germany Tel. : + 49 / 70 62 / 67 59 - 6 Fax: + 49 / 70 62 / 67 59 - 800 Page (3) Version 1.0.6, 08th September 2010