TAD100 TAD100 SERIES 2 X 3 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 100Watts FEATURES APPLICATIONS • LOW STANDBY POWER CONSUMPTION UNDER 0.3 WATT • WIDE INPUT VOLTAGE RANGE 85 TO 264VAC, 47 TO 63HZ • ACTIVE POWER FACTOR CORRECTION • BUILT-IN EMI FILTER • OUTPUT VOLTAGE ADJUSTABLE • OPEN FRAME DIMENSIONS 2.00 X 3.00 X 1.16 INCH • 3000VAC INPUT TO OUTPUT REINFORCED INSULATION • PROTECTION TYPE CLASS I AND CLASS II • LOW LEAKAGE CURRENT UNDER 300µA • OPERATING ALTITUDE 5000M • 3 YEAR WARRANTY • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 3000VAC ISOLATION OCP SCP OVP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • MEASUREMENT EQUIPMENT • SEMICONDUCTOR EQUIPMENT LOW STANDBY POWER PART NUMBER STRUCTURE T A D 100 U S 12 Application Package Code Dimension Code Output Power (W) Input Voltage (VAC) Output Quantity Output Voltage (VDC) U:Universal S:Single 12: 12V No suffix: CLASS I 15: 15V B: CLASS II Industry Application A: Open type U: U chassis type 85 ~ 264VAC E: Enclosed type 24: 24V D: Din rail type 28: 28V Protection Type 36: 36V 48: 48V 1 www.PDUKE.com 2015/3/16 TAD100 TECHNICAL SPECIFICATION All specifications are typical at 230VAC input, full load and 25 otherwise noted Input Range Output Voltage Output Current Natural convection Input Power No Load Efficiency VAC VDC A W % 85 ~ 264 12 8.34 0.3 91 85 ~ 264 15 6.67 0.3 92 85 ~ 264 24 4.17 0.3 92 85 ~ 264 28 3.58 0.3 92 85 ~ 264 36 2.78 0.3 91 85 ~ 264 48 2.09 0.3 91 Model Number TAD100US12 TUD100US12 TED100US12 TDD100US12 TAD100US15 TUD100US15 TED100US15 TDD100US15 TAD100US24 TUD100US24 TED100US24 TDD100US24 TAD100US28 TUD100US28 TED100US28 TDD100US28 TAD100US36 TUD100US36 TED100US36 TDD100US36 TAD100US48 TUD100US48 TED100US48 TDD100US48 INPUT SPECIFICATIONS Parameter Operating input voltage range Input frequency Input current No load input power Leakage current Power Factor Start up time Rise time Hold up time Input inrush current Input protection 2 Conditions AC input DC input AC input 115VAC and Full Load 230VAC and Full Load 230VAC 264VAC Min. Typ. 85 120 47 Max. Unit 264 370 63 1.15 0.55 0.3 300 VAC VDC Hz A Watts µA 0.95 1000 20 115VAC and Full Load 230VAC Internal fuse 22 100 T3.15A/250VAC www.PDUKE.com ms ms ms A 2015/3/16 TAD100 OUTPUT SPECIFICATIONS Parameter Output power Initial set voltage accuracy Line regulation Load regulation Voltage adjustability Minimum load Ripple and noise Temperature coefficient Transient response Over voltage protection Over load protection Short circuit protection Conditions 230VAC and Full Load Low Line to High Line at Full Load No Load to Full Load 10% Load to 90% Load Peak deviation Recovery time Load step form 50 ~ 75% change at 2.5A/µs % of Vout(nom); Latch mode % of Iout rated; Hiccup mode Conditions Isolation resistance Switching frequency Safety approvals 500VDC Max. Unit 100 +1.0 +0.2 +0.5 +0.4 +10 Watts % % 120 150 160 180 190 340 Typ. 3000 1500 0.1 ENVIRONMENTAL SPECIFICATIONS Parameter , Full load Conditions Natural convection and Full load (with derating) -40 start up : 80% Load,max. @ Vin > 100VAC -40 start up : 100% Load,max. @ Vin > 200VAC Non-condensing www.PDUKE.com mVp-p Min. Max. Unit VAC TAD TUD TED TDD MIL-HDBK-217F Ta=25 % % %/ % Vout µs 500 115 135 % 115 150 % Continuous, automatics recovery Min. Input to Output Input (Output) to F.G. % +0.02 3 60 Weight 3 12Vout 15Vout 24Vout 28Vout 36Vout 48Vout -0.02 1 minute (Reinforced insulation) Storage temperature range Operating altitude Thermal shock Shock Vibration Relative humidity -1.0 -0.2 -0.5 -0.4 -10 Measured by 20MHz bandwidth With a 10µF/25V 1206 X7R MLCC With a 10µF/25V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 1µF/50V 1206 X7R MLCC With a 0.1µF/100V 1206 X7R MLCC Isolation voltage Operating ambient temperature Typ. 0 GENERAL SPECIFICATIONS Parameter MTBF Min. Typ. GΩ kHz UL60950-1 EN60950-1 IEC60950-1 156g (5.50oz) 194g (6.84oz) 210g (7.41oz) 232g (8.18oz) 7.903 x 105 hrs Max. Unit -40 +85 -40 +85 5000 m MIL-STD-810F IEC68-2-27 IEC68-2-6 5% to 95% RH 2015/3/16 TAD100 EMC SPECIFICATIONS Parameter Conditions EMI EN55011, EN55022 and FCC Part 15 Harmonic currents Voltage flicker ESD Radiated immunity Fast transient Surge Conducted immunity Power frequency magnetic field Dip and interruptions EN61000-3-2 EN61000-3-3 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 and EN55024 Level Conducted Radiated Full Load Class B Class A Class A and D Air ± 8kV and Contact ± 6kV 20 V/m ± 2kV DM ± 1kV and CM ± 2kV 20 Vr.m.s 10 A/m Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A CHARACTERISTIC CURVE Derating Curve vs. Ambient Temperature TED100 & TDD100 Derating Curve vs. Ambient Temperature TAD100 & TUD100 Derating Curve vs. Input Voltage T D100 Efficiency vs. Output Load T D100US24 4 Efficiency vs. Input Voltage T D100US24 www.PDUKE.com 2015/3/16 TAD100 MECHANICAL DRAWING TAD Open type TED Enclosed type TDD Din rail type TUD U chassis type 1. All dimensions in inch (mm) 2. Tolerance : x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. M3×0.5 screw locked torque MAX 5Kgf.cm/0.49N.m CONNECTORS CONNECTIONS CON1 – Input Connector Pin 1 Pin 3 CON2 – Output Connector Line Neutral Mates with JST housing : VHR-3N JST crimp terminals : SVH-21T-P1.1 5 Pin 1,2 Pin 3,4 Mounting holes marked with must be connected to safety earth for CLASS I application www.PDUKE.com -Vout +Vout Mates with JST housing : VHR-4N JST crimp terminals : SVH-21T-P1.1 2015/3/16