PMKC03 PMKC03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3Watts FEATURES APPLICATIONS • 1600VDC INPUT TO OUTPUT ISOLATION • STANDARD 1.25 X 0.80 X 0.40 INCH • STANDARD 24 PIN DIP PACKAGE & SMD TYPE PACKAGE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH 1600VDC ISOLATION OCP • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25 Model Number PMKC03-05S33 PMKC03-05S05 PMKC03-05S12 PMKC03-05S15 PMKC03-05D05 PMKC03-05D12 PMKC03-05D15 PMKC03-05DS05 PMKC03-05DS12 PMKC03-05DS15 PMKC03-12S33 PMKC03-12S05 PMKC03-12S12 PMKC03-12S15 PMKC03-12D05 PMKC03-12D12 PMKC03-12D15 PMKC03-12DS05 PMKC03-12DS12 PMKC03-12DS15 PMKC03-24S33 PMKC03-24S05 PMKC03-24S12 PMKC03-24S15 PMKC03-24D05 PMKC03-24D12 PMKC03-24D15 PMKC03-24DS05 PMKC03-24DS12 PMKC03-24DS15 PMKC03-48S33 PMKC03-48S05 PMKC03-48S12 PMKC03-48S15 PMKC03-48D05 PMKC03-48D12 PMKC03-48D15 PMKC03-48DS05 PMKC03-48DS12 PMKC03-48DS15 1 Input Range Output Voltage VDC VDC 4.5 ~ 6 4.5 ~ 6 4.5 ~ 6 4.5 ~ 6 4.5 ~6 4.5 ~ 6 4.5 ~6 4.5 ~ 6 4.5 ~ 6 4.5 ~ 6 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 3.3 5 12 15 ±5 ±12 ±15 5/5 12 / 12 15 / 15 3.3 5 12 15 ±5 ±12 ±15 5/5 12 / 12 15 / 15 3.3 5 12 15 ±5 ±12 ±15 5/5 12 / 12 15 / 15 3.3 5 12 15 ±5 ±12 ±15 5/5 12 / 12 15 / 15 Output Current @Full Load Min. Load (1) mA 60 60 25 20 ±30 ±12 ±10 30 / 30 12 / 12 10 / 10 60 60 25 20 ±30 ±12 ±10 30 / 30 12 / 12 10 / 10 60 60 25 20 ±30 ±12 ±10 30 / 30 12 / 12 10 / 10 60 60 25 20 ±30 ±12 ±10 30 / 30 12 / 12 10 / 10 Full Load mA 600 600 250 200 ± 300 ± 125 ± 100 300 / 300 125 / 125 100 / 100 600 600 250 200 ± 300 ± 125 ± 100 300 / 300 125 / 125 100 / 100 600 600 250 200 ± 300 ± 125 ± 100 300 / 300 125 / 125 100 / 100 600 600 250 200 ± 300 ± 125 ± 100 300 / 300 125 / 125 100 / 100 www.PDUKE.com otherwise noted Input Current @ No Load Efficiency Maximum Capacitor Load (2) mA % µF 15 15 30 25 15 20 50 30 40 40 20 20 20 30 20 35 45 10 15 30 10 10 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 69 74 75 75 73 75 75 73 75 73 70 75 79 79 74 79 79 74 79 79 70 76 80 80 76 79 80 76 79 80 72 75 79 79 77 79 79 77 79 79 2200 1000 170 110 ± 500 ± 96 ± 47 500 / 500 96 / 96 47 / 47 2200 1000 170 110 ± 500 ± 96 ± 47 500 / 500 96 / 96 47 / 47 2200 1000 170 110 ± 500 ± 96 ± 47 500 / 500 96 / 96 47 / 47 2200 1000 170 110 ± 500 ± 96 ± 47 500 / 500 96 / 96 47 / 47 2015/2/26 PMKC03 PART NUMBER STRUCTURE PMKC03 - 48 Series Name S Input Voltage (VDC) 05: 4.5~6 12: 9~18 24: 18~36 48: 36~75 Output Quantity S: Single D: Dual DS: Dual Positive 05 Output Voltage (VDC) 33: 3.3 05: 5 12: 12 15: 15 05: ±5 12: ±12 15: ±15 05: 5 / 5 12: 12 / 12 15: 15 / 15 INPUT SPECIFICATIONS Parameter SMD Package : DIP Type SMD: SMD Type Conditions 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Operating input voltage range Input reflected ripple current Start up time Input surge voltage - Nominal input and Full load Constant resistive load 100 ms, max. Min. Typ. Max. Unit 4.5 9 18 36 5 12 24 48 120 6 18 36 75 VDC Power up 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 30 18 36 50 100 Pi type Input filter OUTPUT SPECIFICATIONS Parameter Conditions Voltage accuracy Line regulation Low Line to High Line at Full Load Load regulation Min. Load to Full Load Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection Asymmetrical load 25%/100% FL Measured by 20MHz bandwidth Typ. -1.0 -0.2 -0.5 -0.3 -0.2 -2.0 -5.0 VDC Max. Unit +1.0 +0.2 +0.5 +0.3 +0.2 +2.0 +5.0 % 75 120 150 % % % mVp-p -0.02 Isolation voltage 1 minute Isolation resistance Isolation capacitance Switching frequency Safety approvals 500VDC +0.02 %/ 500 µs Continuous, automatics recovery Conditions Input to Output V1out to V2out(Dual Positive) Min. 1600 500 1 Typ. Max. Unit VDC GΩ pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic Non-conductive black plastic Epoxy (UL94 V-0) 14g (0.48oz) 15g (0.52oz) 7.942 x 106 hrs 300 100 Case material Base material Potting material Weight 2 3.3Vout Others Dual / Dual Positive Dual 3.3Vout, 5Vout 12Vout 15Vout 25% load step change GENERAL SPECIFICATIONS Parameter MTBF Single / Dual Dual Positive Single Min. mAp-p ms DIP Type SMD Type MIL-HDBK-217F, Full load www.PDUKE.com 2015/2/26 PMKC03 ENVIRONMENTAL SPECIFICATIONS Parameter Conditions Operating ambient temperature Storage temperature range Thermal shock Vibration Relative humidity EMC SPECIFICATIONS Parameter EMI ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Min. Without derating Typ. -25 -55 Unit +71 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Max. Level Class A Perf. Criteria A Perf. Criteria A Perf. Criteria B Perf. Criteria B Perf. Criteria A Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ± 1kV 10 Vr.m.s Note: 1. 2. 3. The output requires a minimum loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Test by minimum input and constant resistive load. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE PMKC03-48S05 Derating Curve PMKC03-48S05 Efficiency vs. Input Voltage PMKC03-48S05 Efficiency vs. Output Load MECHANICAL DRAWING DIP TYPE DIP PIN CONNECTION DUAL PIN SINGLE +Vin 1 +Vin -Vout 2 NC Common 3 NC Common 10 -Vout +Vout 11 +Vout -Vin 12 -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin PIN 24 23 22 15 14 13 SINGLE +Vin NC NC -Vout +Vout -Vin DUAL +Vin -Vout Common Common +Vout -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin NC PIN 24 23 22 15 14 13 SINGLE +Vin NC NC -Vout +Vout -Vin DUAL +Vin -Vout Common Common +Vout -Vin DS +Vin -V1out +V1out -V2out +V2out -Vin * NC：No Connection SMD TYPE SMD PIN CONNECTION DUAL PIN SINGLE +Vin 1 +Vin -Vout 2 NC Common 3 NC Common 10 -Vout +Vout 11 +Vout -Vin 12 -Vin NC Others NC * NC：No Connection 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 3 www.PDUKE.com 2015/2/26