Release by PARA LIGHT DCC PARA LIGHT ELECTRONICS CO., LTD. 4F, No.1, Lane 93, Chien Yi Road, Chung Ho City, Taipei, Taiwan, R.O.C. Tel: 886-2-2225-3733 Fax: 886-2-2225-4800 E-mail: [email protected] http://www.para.com.tw DATA SHEET PART NO. : L-C195TBJRCT REV : A / 0 CUSTOMER’S APPROVAL : _______________ DRAWING NO. : DS-31-08-0011 DCC : ____________ DATE : 2008-06-25 Page : 1 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 PACKAGE DIMENSIONS Note: 1. All Dimensions are in millimeters(inches) 2. Tolerance is ±0.10mm(0.004 ") Unless otherwise specified. DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 2 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 FEATURES * LOW POWER CONSUMPTION * I.C. COMPATIBLE * LONGLIFE SOLID STATE RELIABILITY CHIP MATERIALS * Dice Material : InGaN / AlInGaP * Light Color : BLUE & RED * Lens Color : WATER CLEAR ABSOLUTE MAXIMUM RATING : ( Ta = 25°C ) SYMBOL PD PARAMETER BLUE Power Dissipation B R 76 75 UNIT mW If Forward Current 20 30 mA Ifp Peak pulsing current (1/10 duty cycle 0.1ms) 100 80 mA VR Reverse Voltage Topr Tstg 5 V Operating Temperature Range -20 ~ + 80 ℃ Storage Temperature Range -30 ~ + 100 ℃ ELECTRO-OPTICAL CHARACTERISTICS : ( Ta = 25°C ) SYMBOL PARAMETER TEST CONDITION VF Forward Voltage IR Reverse Current ∆λ Spectral Line Half-Width IF = 20mA λp Peak Emission Wavelength IF = 20mA λD Dominant Wavelength IF = 20mA 2θ1/2 Half Intensity Angle Iv Luminous Intensity DRAWING NO. : DS-31-08-0011 IF = 20mA VALUE MIN. TYP. MAX. B 3.3 3.8 R 2.0 2.4 VR = 5V 10 B 25 R 15 B 468 R 639 B 470 R 631 B 18.0 130 45.0 R 18.0 45.0 IF = 20mA IF = 20mA DATE : 2008-06-25 UNIT V µA nm nm nm deg mcd Page : 3 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 Typical Electro-Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 4 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 Bin Code List Luminous Intensity(IV), Unit:mcd@20mA Super Blue Bin Code Min Max M 18.0 28.0 N 28.0 45.0 P 45.0 71.0 Q 71.0 112.0 Tolerance of each bin are±15% Luminous Intensity(IV), Unit:mcd@20mA Super Red Bin Code Min Max M 18.0 28.0 N 28.0 45.0 P 45.0 71.0 Q 71.0 112.0 Tolerance of each bin are±15% DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 5 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 6 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-4000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 7 Release by PARA LIGHT DCC Dome Lens Chip LED L-C195TBJRCT REV:A / 0 Test items and results of reliability DRAWING NO. : DS-31-08-0011 DATE : 2008-06-25 Page : 8