EM78P220N 8-Bit Microprocessor with OTP ROM EM78P220N Errata Document Specification Revision History Doc. Version Revision Description Date 0.9 Preliminary version 2007/03/20 1.0 Initial released version 2007/10/19 1.1 Renamed the Product as EM78P220N from EM78P221N, EM78P222N 2008/01/24 1. Retrieved ICE220N, Updated with ICE210N. 1.2 2. For ICE210N and EM78P220N, added Green mode and Idle mode. 2008/04/23 1.3 Added LVR specifications 2013/04/22 Version 1.2 to Version 1.3 A. Attached Items N.A. Errata Document (V1.3) 04.22.2013 •1 EM78P220N 8-Bit Microprocessor with OTP ROM B. Modified Items 1 Page 54 8 DC Electrical Characteristics 8 DC Electrical Characteristics Ta= 25°C, VDD= 5.0V, VSS= 0V Symbol FXT VIHRC VILRC IIL VIH1 VIL1 VIHT1 VILT1 VIHT2 VILT2 Parameter Min. Typ. DC − F±30% 850 OSCI in RC mode − 3.75 − V OSCI in RC mode − 1.25 − V VIN = VDD, VSS –1.0 0 1.0 µA Ports 5, 6, 7, 8 − 3.75 − V Ports 5, 6, 7, 8 − 1.5 − V /RESET − 1.9 − V /RESET − 1.2 − V TCC, INT − 3.75 − V TCC, INT − 1.25 − V Crystal: VDD to 5V Two cycles with two clocks ERC: VDD to 5V R: 5.1KΩ, C: 100 pF Input High Threshold Voltage (Schmitt Trigger) Input Low Threshold Voltage (Schmitt Trigger) Input Leakage Current for input pins Input High Voltage (Schmitt Trigger) Input Low Voltage (Schmitt Trigger) Input High Threshold Voltage (Schmitt Trigger) Input Low Threshold Voltage (Schmitt Trigger) Input High Threshold Voltage (Schmitt Trigger) Input Low Threshold Voltage (Schmitt Trigger) Max. Unit 16 MHz F±30% kHz VIHX1 Clock Input High Voltage OSCI in crystal mode − 3.75 − V VILX1 Clock Input Low Voltage OSCI in crystal mode − 1.25 − V VOH = 0.9VDD − -9 − mA VOH = 0.7VDD − -27 − mA VOL = 0.1VDD − 16.8 − mA VOL = 0.3VDD − 67.2 − mA Ta = 25°C 2.21 2.5 2.79 V Ta = -40 ~ 85°C 1.94 2.5 3.05 V Ta = 25°C 2.6 3.0 3.42 V Ta = -40 ~ 85°C 2.23 3.0 3.75 V Ta = 25°C 3.56 4.0 4.43 V Ta = -40 ~ 85°C 3.16 4.0 4.81 V Pull-high active, input pin at VSS 50 − 90 µA Pull-low active, input pin at Vdd 20 − 60 µA IOH1 IOH2 IOL1 IOL2 Output High Voltage (Ports 5, 6, 7, 8) Output High Voltage (Ports 6) Output Low Voltage (Ports 5, 6, 7, 8 ) Output Low Voltage (Ports 5, 6) LVR1 LVR2 Low voltage reset level LVR3 IPH IPL 2• Condition Pull-high current (Ports 50~53, 64~67) Pull-low current (Ports 60~67) Errata Document (V1.3) 04.22.2013 EM78P220N 8-Bit Microprocessor with OTP ROM Symbol ISB1 Parameter Condition Min. Typ. Power down current All input and I/O pins at VDD, Output pin floating, WDT disabled, Max. Unit − 2 − µA − 10 − µA − 4.0 − µA LVR disabled ISB2 Power down current All input and I/O pins at VDD, Output pin floating, WDT enabled, LVR disabled ISB3 Power down current All input and I/O pins at VDD, Output pin floating, WDT disabled LVR enabled ICC1 Operating supply current at two clocks (VDD=3V) /RESET= 'High', Fosc=32kHz (Crystal type, CLKS="0"), Output pin floating, WDT disabled, LVR disabled − 15 20 µA ICC2 Operating supply current at two clocks (VDD=3V) /RESET= 'High', Fosc=32kHz (Crystal type, CLKS="0"), Output pin floating, WDT enabled, LVR disabled − 15 25 µA ICC3 Operating supply current at two clocks (VDD=5V) /RESET= 'High', Fosc = 4 MHz (Crystal type, CLKS="0"), Output pin floating, WDT enabled, LVR disabled − 1.5 1.7 mA ICC4 Operating supply current at two clocks (VDD=5V) /RESET= 'High', Fosc = 10 MHz (Crystal type, CLKS="0"), Output pin floating, WDT enabled, LVR disabled − 2.8 3.0 mA Errata Document (V1.3) 04.22.2013 •3 EM78P220N 8-Bit Microprocessor with OTP ROM C. Deleted Items N.A. 4• Errata Document (V1.3) 04.22.2013