eSW4506A Bi-Directional Motor Driver Product Specification DOC. VERSION 1.1 ELAN MICROELECTRONICS CORP. February 2006 Trademark Acknowledgments: IBM is a registered trademark and PS/2 is a trademark of IBM. Windows is a trademark of Microsoft Corporation. ELAN and ELAN logo are trademarks of ELAN Microelectronics Corporation. Copyright © 2005~2006 by ELAN Microelectronics Corporation All Rights Reserved Printed in Taiwan The contents of this specification are subject to change without further notice. ELAN Microelectronics assumes no responsibility concerning the accuracy, adequacy, or completeness of this specification. ELAN Microelectronics makes no commitment to update, or to keep current the information and material contained in this specification. Such information and material may change to conform to each confirmed order. In no event shall ELAN Microelectronics be made responsible for any claims attributed to errors, omissions, or other inaccuracies in the information or material contained in this specification. ELAN Microelectronics shall not be liable for direct, indirect, special incidental, or consequential damages arising from the use of such information or material. The software (if any) described in this specification is furnished under a license or nondisclosure agreement, and may be used or copied only in accordance with the terms of such agreement. ELAN Microelectronics products are not intended for use in life support appliances, devices, or systems. Use of ELAN Microelectronics product in such applications is not supported and is prohibited. NO PART OF THIS SPECIFICATION MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE EXPRESSED WRITTEN PERMISSION OF ELAN MICROELECTRONICS. ELAN MICROELECTRONICS CORPORATION Headquarters: Hong Kong: USA: No. 12, Innovation Road 1 Hsinchu Science Park Hsinchu, Taiwan 30077 Tel: +886 3 563-9977 Fax: +886 3 563-9966 http://www.emc.com.tw Elan (HK) Microelectronics Corporation, Ltd. Elan Information Technology Group (U.S.A.) Rm. 1005B, 10/F Empire Centre 68 Mody Road, Tsimshatsui Kowloon , HONG KONG Tel: +852 2723-3376 Fax: +852 2723-7780 [email protected] 1821 Saratoga Ave., Suite 250 Saratoga, CA 95070 USA Tel: +1 408 366-8225 Fax: +1 408 366-8220 Europe: Shenzhen: Shanghai: Elan Microelectronics Corp. Elan Microelectronics Shenzhen, Ltd. (Europe) Siewerdtstrasse 105 8050 Zurich, SWITZERLAND Tel: +41 43 299-4060 Fax: +41 43 299-4079 http://www.elan-europe.com SSMEC Bldg., 3F, Gaoxin S. Ave. Shenzhen Hi-Tech Industrial Park Shenzhen, Guandong, CHINA Tel: +86 755 2601-0565 Fax: +86 755 2601-0500 Elan Microelectronics Shanghai , Ltd. 23/Bldg. #115 Lane 572, Bibo Road Zhangjiang Hi-Tech Park Shanghai, CHINA Tel: +86 21 5080-3866 Fax: +86 21 5080-4600 Contents Contents 1 General Description ...................................................................................... 1 2 Features ......................................................................................................... 1 3 Pin Assignment.............................................................................................. 1 4 Pin Descriptions ............................................................................................ 1 5 Absolute Maximum Ratings.......................................................................... 2 6 Electrical Characteristics.............................................................................. 2 7 Operation Mode ............................................................................................. 3 8 Application Circuit......................................................................................... 3 8.1 Single Motor Drive - Bi-Directional ....................................................................... 3 8.2 Two-Motor Drive with On-Off................................................................................ 4 Product Specification (V1.1) 02.21.2006 • iii Contents Specification Revision History Version iv • Revision Description Date 1.0 Initial version 2005/03/31 1.1 Add application circuitry 2006/02/21 Product Specification (V1.1) 02.21.2006 eSW4506A Bi-Directional Motor Drive 1 General Description The eSW4506A IC is a bi-directional motor driver IC used in low-voltage application. It provides Forward/Reverse/Brake/Stop function for motor driver application. It is designed with LSI high technology along with low power consumption. 2 Features Low voltage operation Low current drain at standby mode Built-in Input pull down resistance Provides 4 modes of motor driving, i.e., Forward/Reverse/Brake/Stop. 3 Pin Assignment VDD 1 8 VDD OUTA 2 7 OUTB Vss 3 A 4 6 Vss 5 B Figure 3-1 eSW4506A 8 Pin PDIP 4 Pin Descriptions Symbol I/O Pin No. Function VDD I 1, 8 Positive power supply Vss I 3, 6 Negative power supply. A I 4 Input signal A B I 5 Input signal B OUTA O 2 Motor driver outout A OUTB O 7 Motor driver output B Product Specification (V1.1) 02.21.2006 (This specification is subject to change without further notice) •1 eSW4506A Bi-Directional Motor Drive 5 Absolute Maximum Ratings Items Symbol Min Max Unit Supply Voltage VDD-VSS –0.3 +5.5 V VIN VSS –0.3 VDD+0.3 Input Voltage V Operating Temperature TOP –20.0 +70.0 0 Storage Temperature TSTG –55.0 +125.0 0 C C 6 Electrical Characteristics Operating Temperature =25°C Items Sym Min. Typ. Max. Unit Operating Voltage VDD 2.0 3.0 5.5 V Standby Current IDDS - 0.4 1 uA VDD=3V, A,B = Vss 1.1 2 uA VDD=4.5V, A,B = Vss IDDO - 3.4 50 uA VDD=3V, no load, 8.7 50 uA VDD=4.5V, no load, 3 6 uA VDD=3V, VIN =VDD IiN 7.5 15 uA VDD=4.5V, VIN =VDD 2.4 VDD V VDD=3V 3.2 VDD V VDD=4.5V Vss 0.6 V VDD=3V Vss 1.2 V VDD=4.5V 400 mA VDD=3V, 670 mA VDD=4.5V, 0.15 0.3 V VDD=3V, IOL= 100mA 0.10 0.3 V VDD=4.5V, IOL= 100mA VDD –0.3 2.8 - V VDD=3V, IOH=100mA VDD –0.3 4.4 - V VDD=4.5V, IOH=100mA 3.8 10 nS VDD=3V, no load 2.8 10 nS VDD=4.5V, no load 3.2 10 nS VDD=3V, no load 4.0 10 nS VDD=4.5V, no load 6 15 nS VDD=3V, no load 3.5 10 nS VDD=4.5V, no load Operating Current A/B Input Current A/B Input High Voltage VIH A/B Input Low Voltage ViL OUTA-OUTB Load Current IO Output Low Voltage Output High Voltage Output Rise Time Output Fall Time Input to Output Response Time 2• VOL VOH - - TRS - TFL - TRP - Condition Product Specification (V1.1) 02.21.2006 (This specification is subject to change without further notice) eSW4506A Bi-Directional Motor Drive 7 Operation Mode Input A Input B OutA OutB Mode L L L L STOP H L H L Forward L H L H Reverse H H H H Brake 8 Application Circuit 8.1 Single Motor Drive - Bi-Directional A Vdd 4 OUTA 2 C1 0.1u InA 1 U1 10~100uF 8 + Vdd C4 1 VCC M1 eSW4506A C3 MOTOR 0.1u 7 C2 0.1u 2 OutB 6 3 Vss InB Vss B 5 Figure 8-1 Single Motor Drive - Bi-Directional Application Circuit Product Specification (V1.1) 02.21.2006 (This specification is subject to change without further notice) •3 eSW4506A Bi-Directional Motor Drive 8.2 Two-Motor Drive with On-Off VCC C7 + C1 0.1u 1 10~100uF M1 C3 MOTOR A 4 OUTA 0.1u 2 C2 0.1u 8 Vdd Vdd U 1 VCC 2 InA VCC InB Vss 5 Vss B OutB 7 C4 0.1u 1 eSW4506A M2 C5 0.1u 0.1u 2 6 3 C6 MOTOR Figure 8-2 Two-Motor Drive with On-Off Application Circuit 4• Product Specification (V1.1) 02.21.2006 (This specification is subject to change without further notice)