10 Amp Subminiature PCB Power Relay PC415

10 Amp Subminiature PCB Power Relay
PC415
FEATURES








10 Amp Continuous Contact Capacity
1 Form A, 1 Form B and 1 Form C Contact Forms
Most Popular Package and Footprint
Class “B” Insulation Standard
Class “F” Insulation Available
Popular “Sugar Cube” Footprint
Sealed, Immersion Cleanable
Lead Free and RoHS Compliant
E93379
cULus Ratings
Contact Data
Load Type
All Forms, All Contacts
Max Switching Power
420 W, 2500 VA
Max. Switching Voltage
110 VDC, 380 VAC
Resistive
10 Amps @ 120 VAC & 28 VDC
7 Amps @ 240 VAC
5 Amps @ 277 VAC
20 Amps @ 14 VDC
Max Switching Current
20 A
Material
AgCdO (Silver Cadmium Oxide)
10 Amps @ 120 VAC & 28 VDC
7 Amps @ 240 VAC
5 Amps @ 277 VAC
20 Amps @ 14 VDC
Initial Contact Resistance
100 milliohms max @ 0.1 A, 6 VDC
General Purpose
Motor
Service Life
Mechanical
Electrical
1 X 107 Operations
1 X 105 Operations
1/3 HP @ 125 VAC / 277 VAC
Characteristics
Operate Time
Less than 10 ms
Release Time
Less than 5 ms
Insulation Resistance
1,000 megohms min, at 500 VDC, 50% RH
1500 Vrms, 1 min. between coil and contacts
Dielectric Strength
Shock Resistance
750 Vrms, 1 min. between open contacts
Vibration Resistance
Operating Temperature
DA 1.5 mm, 10 - 55 Hz
Storage Temperature
-55 to 130 ºC
Weight
Solderability
9.5 grams
-55 to 85 ºC
235 ºC for 3 seconds
10 g, 11 ms, functional; 100 g, destructive
Ordering Information
Example: PC415
-1A
-12
S
F
-X
Model: PC415
Contact Form: 1A, 1B, 1C
Coil Voltage: 3, 5, 6, 9, 12, 24, 48
Coil Sensitivity: Nil: 360 mW, B: 450 mW, L: 800 mW
Enclosure: S: Sealed; C: Dust Cover
Insulation System: Nil: Class B, F: Class F
Contact Material: Nil: AgCdO, T: AgSnO, G: AgCdO + Gold
Plate
RoHS Compliant: -X
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
PCTxL Rev A 7/30/14
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.
PC415
Coil Data
PC415
Coil Power
Coil Voltage
Resistance ohms ± 10%
Must Operate
Voltage Max.
(VDC)
Must Release
Voltage Min.
(VDC)
Continuous
Voltage Max.
(VDC)
360 mW
450 mW
800 mW
3
25
20
11
2.1
0.3
3.9
5
70
55.6
31
3.5
0.5
6.5
6
100
80
45
4.2
0.6
7.8
9
225
180
101
6.3
0.9
11.7
12
400
320
180
8.40
1.2
15.6
24
1600
1280
720
16.8
2.4
31.2
48
6400
5120
2880
33.60
4.8
62.4
Caution: 1. The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay.
2. Pickup and release voltage are for test purposes only and are not to be used as design criteria.
Dimensions in Millimeters (inches)
Side View
Bottom View
PC Board Layout
End View
Wiring Diagram
Notes: Contact Form C shown
On Contact Forms A & B Unused Pins are Omitted
Tolerances ± .010 unless otherwise noted
3220 Commander Drive, Suite 102 Carrollton, TX 75006
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
www.PickerComponents.com
e-mail: sales@pickercomponents.com
PCTxL Rev A 7/30/14
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.