160 MHz SAW Filter Set 10 MHz Bandwidth Part Number

160 MHz SAW Filter Set
10 MHz Bandwidth
Part Number: SF0160BA02329T
DESCRIPTION
•
•
•
160 MHz SAW bandpass filter set of two with 10 MHz bandwidth.
22.1 x 12.7 mm DIP package, 6-14 pins.
RoHS compliant.
TYPICAL PERFORMANCE (each filter)
Horizontal:
Vertical (from top):
S11 (130-190 MHz)
Frequency
Magnitude
Magnitude
Phase Deviation
Group Delay Deviation
6
10
1
5
50
MHz /div
dB/div
dB/div
deg/div
ns/div
S22 (130-190 MHz)
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0160BA02329T Rev B 15-Mar-2010
ECN 36650
Page 1 of 4
160 MHz SAW Filter Set
10 MHz Bandwidth
Part Number: SF0160BA02329T
SPECIFICATION (each filter)
Min
Typ
Max
Center Frequency (Fc)
-
160.00
-
Average Insertion Loss (155-165 MHz)
Loss Variation vs. Temperature
(25ºC to 70ºC – Included in above loss)
Amplitude Variation (155-165 MHz at 25ºC)
-
21.3
23
dB
-
0.7
0.75
dB
-
0.45
0.6
dB p-p
Amplitude Variation (155-165 MHz at 0ºC,70ºC)
-
0.9
1.0
dB p-p
Lower 40 dB Band Edge
152.20
152.30
-
MHz
Upper 40 dB Band Edge
-
167.55
167.80
MHz
Parameter
Phase Linearity (155-165 MHz)
Units
MHz
-
2.8
4
deg p-p
Rejection (10 to 150 MHz)
40
45
-
dB
Rejection (170 to 250 MHz)
40
48
-
dB
Input VSWR
-
1.8
2.0
:1
Output VSWR
-
1.8
2.0
:1
35
42
-
dB
-
50
-
ohm
Triple Transit Suppression
System Source and Load Impedance
Notes:
1. All parameters are evaluated with matching circuit.
2. This is single filter performance. Two filters make up a cascaded pair
SPECIFICATION (Cascaded Set)
Min
Typ
Max
Center Frequency (Fc)
-
160.00
-
Amplitude Variation (155-165 MHz at 25ºC)
-
0.9
1.2
dB p-p
Amplitude Variation (155-165 MHz at 0º, 70ºC)
-
1.8
2.0
dB p-p
Lower 80 dB Band Edge
152.20
152.33
-
MHz
Upper 80 dB Band Edge
-
167.45
167.80
MHz
Parameter
Phase Linearity (155-165 MHz)
Units
MHz
-
4.5
8
deg p-p
Rejection (10 to 150 MHz)
80
90
-
dB
Rejection (170 to 250 MHz)
80
86
-
dB
-
50
-
ohm
System Source and Load Impedance
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0160BA02329T Rev B 15-Mar-2010
ECN 36650
Page 2 of 4
160 MHz SAW Filter Set
10 MHz Bandwidth
Part Number: SF0160BA02329T
MAXIMUM RATINGS
Parameter
Storage Temperature Range
Operating Temperature Range
Input Power Level
Min
-40
0
-
Max
85
70
+13
Units
˚C
˚C
dBm
MATCHING CIRCUIT (each filter)
Input
50 Ω
Single-ended
Output
50 Ω
Single-ended
GND
GND
Typical component values:
Ls1 = 47 nH
Cp1 = 45 pF
Rp1 = 300 Ω
Ls2 = 59.3 nH
Cp2 = 27 pF
Rp2 = 300 Ω
Notes:
1. Recommend +/-2% tolerance matching components. Typical inductor Q=40.
2. Tuning values shown are for reference only. Optimum values may change depending upon board layout
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0160BA02329T Rev B 15-Mar-2010
ECN 36650
Page 3 of 4
160 MHz SAW Filter Set
10 MHz Bandwidth
Part Number: SF0160BA02329T
PACKAGE OUTLINE (each filter)
MARKING
SMI BA02329T
XXXX Filter 1
∆ YYDDD
ESD/Pin 1
Date Code
Square Corner (denotes pin 1 location)
SMI BA02329T
XXXX Filter 2
∆ YYDDD
ESD/Pin 1
Date Code
Square Corner (denotes pin 1 location)
Units: mm
Tolerances are ±0.15 mm except
where indicated.
Pin Configuration:
Input:
8
Output:
14
Ground:
1, 2, 7, 9
ISO 9001
Registered
All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice.
© 2010 All rights reserved.
Spectrum Microwave
400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401
www.SpectrumMicrowave.com
DSSF0160BA02329T Rev B 15-Mar-2010
ECN 36650
Page 4 of 4