DC BLOCKS, INSIDE SMA, TNC and Type N, 10 MHz - 18 GHz, 950 Volts SPECIFICATIONS: Models: 8532-SI-HV, 8532-NI-HV, 8532-TI-HV Electrical: * Frequency Range Insertion Loss 10 MHz - 4 GHz 4 - 18 GHz VSWR Working Voltage Impedance Operating Temp Range 10 MHz - 18 GHz 1.0 dB Max. 1.5 dB Max. 1.60:1 Max. 950 Volts 50 Ohms -65°C to +100°C Mechanical: Connectors Passivated Stainless Steel Mates with MIL-STD-348 Housing Conductors Coupling Nut: SMA and Type N Units TNC Units Passivated Stainless Steel Gold Plated Beryllium Copper Passivated Stainless Steel Nickel Plated Brass * Lower frequency economy units are available. Contact factory. TNC Units Type N Units SMA Units 1.08±.05 [27.43±1.27] 1.78±.05 [45.21±1.27] 1.98±.05 [50.29±1.27] Ø.36 [9.14] Ø.83 Max. [21.08] HOW TO ORDER: 8532-XI-HV Model Number: Base Model Number Connector Series N = Type N S = SMA T = TNC Ø.56 [14.22] Ordering Examples: Model Number: 8532-NI-HV Inner Only, Type N Male/Female High Voltage Designation DC Block Type I = Inner Only Model Number: 8532-SI-HV Inner Only, SMA Male/Female Model Number: 8532-TI-HV Inner Only, TNC Male/Female Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design, specifications are subject to change without notice. Contact factory for technical specifications before purchasing and/or use. 8532-XI: REV E Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]