Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA Surface Mount Type Series: ZA Type: V High temperature Lead-Free reflow ■ Features ● Endurance: 10000 h at 105 °C ● Low ESR and High ripple current (70 % over, Lower ESR than Current V-FP) ● High voltage (to 80 V) ● Equivalent to conductive polymer type Aluminum Electrolytic Capacitor (There are little characteristics change by temperature and frequency) ● Vibration-proof product is available upon request. (08 mm and larger) ● AEC-Q200 qualified ✽ ● RoHS directive compliant ■ Specifications Category Temp. Range Rated Voltage Range Nominal Cap.Range Capacitance Tolerance –55 °C to +105 °C 25 V.DC to 80 V.DC 10 μF to 330 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) DC Leakage Current Please see the attached Standard Products list The capacitor shall be subjected to application of the D.C. voltage with full rated ripple current at +105 °C for 10000 hours. After stabilizing at room temperature(+15 to 35 °C), the capacitor shall not exceed the specified limits. (The sum of DC voltage and ripple peak voltage shall not exceed the rated voltage.) Capacitance change ±30 % of initial measured value tan d < 200 % of initial specified value E. S. R. < 200 % of initial specified value DC leakage current < initial specified value Size Code ESR after Endurance C D D8 F G (Ω/100 kHz) (–40 °C) 2.0 1.4 0.8 0.4 0.3 tan d Endurance After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life After applying rated working voltage for 2000 hours at +85 °C±2 °C / 85% to 90%RH and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change ±30 % of initial measured value tan d < 200 % of initial specified value E. S. R. < 200 % of initial specified value DC leakage current < initial specified value After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value Damp Heat (Load) Resistance to Soldering Heat ■ Dimensions in mm (not to scale) Series identification L Pressure Relief (010 and larger) Rated Voltage Mark Size code Lot number Rated Voltage Mark E V H 25 V 35 V 50 V J K 63 V 80 V D L A, B C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 K (P) Capacitance (μF) + (I) 0D±0.5 Negative polarity marking (–) 33 E ZA A±0.2 – (I) 0.3 max. Marking color : BLACK H Example:25 V 33 μF (Unit : mm) B±0.2 ■ Marking W ( ) Reference size H I W P K 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.5 1.8 1.8 3.1 4.6 0.15 0.35 +- 0.20 + 0.15 0.35 - 0.20 0.15 0.35 +- 0.20 0.70±0.2 0.70±0.2 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2015 – EEE-2 – Conductive Polymer Hybrid Aluminum Electrolytic Capacitors/ZA ■ Standard Products Endurance : 105 °C 10000 h Case size R.V. (V) 25 35 50 63 80 Cap. (±20 %) (μF) 33 Dia. Length (mm) 5 (mm) 5.8 Min. Packaging Q'ty Specification Size Code C Ripple Current (100 kHz) (+105 °C) (mA r.m.s.) 900 E.S.R. tan d (100 kHz) (+20 °C) (mΩ) 80 (120 Hz) (+20 °C) 0.14 Part No. Reflow (RoHS:compliant) EEHZA1E330R Taping (5) (pcs) 1000 56 6.3 5.8 D 1300 50 0.14 EEHZA1E560P (5) 1000 100 6.3 7.7 D8 2000 30 0.14 EEHZA1E101XP (5) 900 220 8 10.2 F 2300 27 0.14 EEHZA1E221P (6) 500 330 10 10.2 G 2500 20 0.14 EEHZA1E331P (6) 500 22 5 5.8 C 900 100 0.12 EEHZA1V220R (5) 1000 27 6.3 5.8 D 1300 60 0.12 EEHZA1V270P (5) 1000 47 6.3 5.8 D 1300 60 0.12 EEHZA1V470P (5) 1000 68 6.3 7.7 D8 2000 35 0.12 EEHZA1V680XP (5) 900 500 150 8 10.2 F 2300 27 0.12 EEHZA1V151P (6) 270 10 10.2 G 2500 20 0.12 EEHZA1V271P (6) 500 10 5 5.8 C 750 120 0.10 EEHZA1H100R (5) 1000 22 6.3 5.8 D 1100 80 0.10 EEHZA1H220P (5) 1000 33 6.3 7.7 D8 1600 40 0.10 EEHZA1H330XP (5) 900 500 68 8 10.2 F 1800 30 0.10 EEHZA1H680P (6) 100 10 10.2 G 2000 28 0.10 EEHZA1H101P (6) 500 5.8 D 1000 120 0.08 EEHZA1J100P (5) 1000 900 10 6.3 22 6.3 7.7 D8 1500 80 0.08 EEHZA1J220XP (5) 33 8 10.2 F 1700 40 0.08 EEHZA1J330P (6) 500 56 10 10.2 G 1800 30 0.08 EEHZA1J560P (6) 500 22 8 10.2 F 1550 45 0.08 EEHZA1K220P (6) 500 33 10 10.2 G 1700 36 0.08 EEHZA1K330P (6) 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P”. ■ Frequency correction factor for ripple current Capacitance Frequency 0.1 0.12 0.2 0.3 (μF) (kHz) C < 47 0.10 0.10 0.10 0.15 Correction 47 < C < 150 0.15 0.15 0.20 0.25 factor 150 < C 0.15 0.15 0.25 0.25 0.5 1 2 3 5 10 15 20 30 40 50 100 300 500 1000 0.20 0.30 0.40 0.45 0.50 0.60 0.65 0.70 0.75 0.80 0.85 1.00 1.00 1.05 1.05 0.30 0.40 0.45 0.55 0.60 0.70 0.75 0.80 0.80 0.85 0.90 1.00 1.00 1.00 1.00 0.30 0.45 0.50 0.60 0.65 0.75 0.80 0.85 0.85 0.85 0.90 1.00 1.00 1.00 1.00 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2015 – EEE-3 –