Wirewound Resistors, Flameproof, Bath-tub Type (High

Wirewound Resistors,
Flameproof, Bath-tub Type
Wirewound Resistors, Flameproof, Bath-tub Type
(High Power with Aluminum Case Type)
Type:
ERF□□□W
ERF60W, ERF100W, ERF150W, ERF200W
Discontinued
■ Features
● Flameproof .................. Made from nonflammable materials, making the resistor very safe.
● Exclusive Pulse ............ Suited for regeneration resistance, due to a structure and materials equipped for pulse
characteristics.
● Uniform Quality ............ An exclusive automated process with a meticulous quality-control system, combining fine
selections of resistance wires and associated qualified materials resulting in uniform quality
and consistent reliability.
● RoHS compliant
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
11
&
3
'
8
+
Product Code
Style
Code
Style
Aluminum case receipt type
W
Power Rating
Code Rated power
60
60 W
100
100 W
150
150 W
200
200 W
Fixed
Wire wound
Resistor
Bath-tub
Resistance
Tolerance
Code Tolerance
J
±5 %
K
±10 %
12
Suffix for Special Features
When performing lead processing
and special condition specification,
the classification is denoted in the
Roman alphabet using one character.
Resistance Value
The first two digits are significant
figures of resistance and the third
one denotes number of zeros
following. Decimal point is expressed
by R as 4.7 = 4R7
■ Construction
Alnminum case End cap
Marking
Electric wire
5
Cement
■ Dimensions in mm (not to scale)
Ceramic plate with holes
Resistance wire
1
F
Ceramic plate
W
1
H
Ceramic case
60W : 120±10
More than 100 W : 200±10
L2
P
L1
Fiber-Glass core
18
■ Ratings
✽1
Type
Power
Rating
at 25 °C
(W)
Resistance Range
(Ω)
min.
max.
Dielectric
Withstanding
Voltage
(VAC)
Standard
Quantity
(pcs.)
ERF60W
Type
Dimensions (mm)
L1
P
F
Standard Mass
(Weight) (g/pc.)
L2
W
H
100
75
30
13
90
67
58
152
120
44
13
140
112
126
ERF60W
60
1.2
450
2000
50
ERF100W
ERF100W
100
8.2
910
2000
50
ERF150W
182
150
44
13
170
134
152
ERF150W
150
11.0
1.2 k
2000
50
ERF200W
230
200
44
13
220
184
183
ERF200W
200
15.0
1.6 k
2000
50
✽1 ; Classis Mounted (300×300×2t Al plate)
■ Packaging Methods
Please contact the factory for packaging methods
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Aug. 2012
65
Wirewound Resistors,
Flameproof, Bath-tub Type
Safety Precautions
Discontinued
The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors
shown on this catalog.
1. Since Wirewound Resistors (hereafter called the resistors) generate heat during use, mount them on your
product and carefully check the effect of heat on other components. Provide for adequate safety when designing
your product. Otherwise, when a short circuit or other abnormality occurs, or when a voltage or current exceeding
the rating is applied, the resistors may overheat without breaking, or may generate smoke or red-heat, breaking
the ceramic case and thus exposing the red-heating resistor element.
2. Carefully check the inductance effect of the resistors when using them in a high-frequency circuit.
3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the
operations of the resistors when installed in your products under the most adverse conditions before use.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Aug. 2012
66