Plastic Film Capacitors／EZPE Metallized

Plastic Film Capacitors／EZPE
Metallized Polypropylene Film Capacitors
Type: EZPE Series (Low profile type)
■Features
●High safety, Self-healing and Self-protecting function built-in
●Long product life, High reliability, High moisture resistance
●Low loss, Low ESR
●Flame retardant
●RoHS directive compliant
●Low profile design
■Recommended Applications
For DC filtering, DC link circuit
●Solar inverters, Micro inverters
●Wind power generation
●Industrial power supplies
●Inverter circuit in appliances (Air Conditioners etc.)
■Construction
●Dielectric : Polypropylene film
●Electrodes : Metallized dielectric with segmented pattern
●Plastic case : UL94 V-0
●Sealing
: UL94 V-0
●Terminals : Tinned wires,2-pin and 4-pin versions
■Explanation of Part Numbers
1
2
3
4
E
Z
P
E
Product code
5
6
7
8
9
10
11
12
T
Dielectric &
construction
Rated voltage
（Ex.）
Capacitance
Pin type
Suffix
45
450 VDC
L
2-pin type
52
525 VDC
M
4-pin type
Suffix
■Specifications
Category temperature range (TC) (*1)
Rated voltage(VR) (*2)
Rated capacitance (CR)
–40 °C to +85 °C
450 VDC ，525 VDC
(Derating of rated voltage by more than 70 °C (*3))
450 VDC
66 μF
525 VDC
29 μF
Capacitance tolerance
±15 %
Withstanding DC voltage
Between terminals : Rated voltage. (VDC)✕150 % 10 s
Terminal to case: 2 000 VAC ( 50 Hz or 60 Hz ) 10 s
Insulation resistance (CR)
CR ≧ 10 000 Ω・F (20 °C, 500 VDC, 60 s )
*1: The temperature of capacitor surface (case)
*2: Use for DC voltage only
*3: Refer to the page of “ DC voltage derating ”
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Plastic Film Capacitors／EZPE
■Dimensions in mm (not to scale)
(b)
(a)
(ｃ)
(a)
Rated voltage
(b)
(c)
Capacitance
Lot No.
■Rating, Dimensions & Quantity / Ammo Box
●Type EZPE Rated voltage : 450 VDC at 70 ℃
Dimensions [mm]
Part No.
EZPE45666MTB
CR.
(μF)
66
W
H
L
P1
P2
φ
90.0
24.0
32.5
27.5
37.5
0.8
dv/dt
[V/μs]
5
Permissible
current
Peak
Current
RMS
Current
[Ao-p]
[Arms]
(※1)
(※2)
300
15.0
ESRtyp
[mΩ]
Tanδ
[%]
Mass
MOQ
[g]
[pcs]
(※3)
(※4)
5.0
0.3
110
200
ESRtyp
[mΩ]
Tanδ
[%]
Mass
MOQ
(※5)
●Type EZPE Rated voltage : 525 VDC at 70 ℃
Dimensions [mm]
Part No.
EZPE52296MTB
CR.
(μF)
29
W
48.5
H
23.5
L
37.0
P1
34.0
P2
20.3
φ
0.8
dv/dt
[V/μs]
14
Permissible
current
Peak
Current
RMS
Current
[Ao-p]
[Arms]
(※1)
(※2)
400
3.0
(※3)
(※4)
7.0
0.4
[g]
[pcs]
50
400
*1: When rising temperature of capacitor surface by continuous peak current (included pulse current),
use within limit specified for temperature of capacitor surface and self heating temperature rise.
*2: Maximum RMS current @ 70 ℃, 10 kHz
Use within limit for self heating temperature rise at capacitor surface.
*3: Typical values @ 20 ℃, 10 kHz ESR : less than 2.5 × ESRtyp
*4: Maximum dissipation factor @20 ℃, 1 kHz
*5: Minimum order quantity consists of 4 packing units.
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
(※5)
Plastic Film Capacitors／EZPE
■Permissible Conditions
●Permissible Voltage
・ These capacitors are designed only for DC voltage, so should not be used for AC line.
・Use the peak voltage (Vo-p) within the rated voltage.
・Use the peak to peak voltage (Vp-p) within 0.2 x VR
VR ≧ Vo-p
Vp-p = 0.2 × VR
Vo
DC voltage (Vo-p)
DC Voltage derating
Voltage ①
Voltage ②
60
65
70
75
80
85
90
95
100
Percentage to the permissible current (%)
●DC Voltage, Peak current and RMS current derating
Derating of voltage (Vo-p), RMS current (Arms), and peak current (Ao-p) according to the following diagram,
when the temperature of the capacitor surface exceeds 70℃.
Please refer to the approval sheet for DC voltage, RMS current, and Peak current.
Current derating
120%
100%
80%
60%
40%
20%
0%
60
Temperature of capacitor surface TC (℃)
65
70
75
80
85
90
95
100
Temperature of capacitor surface TC (℃)
Ex. DC voltage
Voltage ①
Voltage ②
450VDC
400VDC
525VDC
450VDC
●Total cycles applied current
Total cycles applied peak current (Ao-p)
(including pulse current) are within following diagram.
Permissible self temp. rise (℃）
120%
100%
80%
60%
40%
20%
0%
60
65
70
75
80
85
90
95
Temperature of capacitor surface TC (℃)
100
Percentage to the permissible current (%)
●Permissible self heating temperature rise
Permissible self heating temperature rise is
Within following diagram when the temperature
of the capacitor surface exceeds 70℃.
100%
80%
60%
40%
20%
0%
10
100
1000
10000
Total cycles
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
100000
Plastic Film Capacitors／EZPE
■Characteristics ＜Reference＞
●Temperature Characteristics
at 1kHz
10
Capacitance
Dissipation factor (typical curve)
(typical curve)
at 1kHz
1.0
0.9
0.8
5
tanδ (%)
(%)
0.7
⊿C/C
0
-5
0.6
0.5
0.4
110uF
0.3
100uF
0.2
60uF
20uF
0.1
0.0
-10
-60
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
Temperature (℃)
Temperature (℃)
Insulation resistance
-60
(typical curve)
at 500VDC
1.E+07
1.E+06
C･R (Ω･F)
1.E+05
1.E+04
1.E+03
1.E+02
1.E+01
1.E+00
-60
-40
-20
0
20
40
60
80
100
120
Temperature (℃)
●Frequency Characteristics
Impedance vs. Frequency (typical curve)
100
10
Impedance
(Ω)
20uF
60uF
1
110uF
0.1
0.01
0.001
1
10
100
1000
10000
Frequency (kHz)
Design, Specifications are subject to change without notice.
Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
80
100
120