BVS SERIES UNIVERSAL INPUT MULTIPLE OUTPUT MODELS Power ratings are convection cooled unless otherwise noted. +12V 4A/7A P K POWERB(WATTS) 0 NOTE MODEL % CONTINUOUS PEAK VOLTAGE +5V 80 80 100 180 90 90 113 180 ADJUSTABLE INITIAL .2 LINE CURRENT SETTING 1% REGULATION TOLERANCE +12V4A/7A PKADJUSTABLE NOTE B0.2%1% ADJUSTABLE 14A 0.2% NOTE A 4A/7A PK ADJUSTABLE NOTE B 0.2% 1% –5V 1A ±4% NOTE C 0.5% 2% –12V 3A ±4% NOTE C 0.5% 2% +5V 14A ADJUSTABLE NOTE A 0.2% 1% +12V 4A/7A PK ADJUSTABLE NOTE B 0.2% 1% –12V 1A ±4% NOTE C 0.5% 2% –5V 3A ±4% NOTE C 0.5% 2% +6.5V 9.6A/10A PK ADJUSTABLE 6.2V to 6.8V 0.2% 1% +12V 1.6A/2A PK ±4% NOTE C 0.5% 2% –12V 1.6A/2A PK ±4% NOTE C 0.5% 2% +5V 12A ADJUSTABLE NOTE A 0.2% 1% +12V 10A ADJUSTABLE NOTE B 0.2% 1% BVS-080 M42001 BVS-180 M20011 CONFIGURATION 1% +12V BVS-080 M41001 BVS-100 EG03 LOAD REGULATION U-CHANNEL CHASSIS 7.20” x 4.20” x 1.80” (182.88mm) x (106.68mm) x (45.72mm) U-CHANNEL CHASSIS 7.20” x 4.20” x 1.80” (182.88mm) x (106.68mm) x (45.72mm) BOARD ONLY 9.00” x 2.20” x 1.55” (228.6mm) x (55.8mm) x (39.4mm) U-CHANNEL CHASSIS 5.50” x 5.00” x 1.65” (139.7mm) x (127.0mm) x (41.9mm) Ask for Specials Custom Variations Quoted and Shipped Promptly NOTES: A. Voltage level adjustable from 4.75V to 5.50V. B. Full regulated output, voltage adjustable ±4% minimum. Factory set to ±1% of nominal. C. Fully regulated output, voltage fixed. Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com 27 BVS-30 H = 1.17” H BVS-40 H = 1.38” 5.0 A.C. INPUT VIEW #6-32 WIRE CLAMPS ON .325 CNTRS., 8 PLACES 2.55 3.0 C L GND N L 2.65 D.C. OUTPUT VIEW V1 GND V2 V3 V4 SINGLE OUTPUT MODELS USE V1 PIN. 4.55 .156 DIA. WEIGHT: 0.80 LBS. MTG. HOLES, 4 PLACES BVS-50 A.C. INPUT VIEW 1.25 L N GND INPUT & OUTPUT CONNECTORS .045" SQ. PINS, 7 PLACES .156" PITCH, LOCKING RAMP MATES WITH MOLEX 2139 SERIES 7.0 D.C. OUTPUT VIEW 2.0 1.62 C L V1 GND V2 6.62 .125 DIA. MTG. HOLES, 4 PLACES WEIGHT: 0.55 LBS. 6.00" BVS-60 0.25" 5.50" 1.065" 1.60" SIDE VIEW 0.535 A.C. INPUT VIEW #6-32 UNC THD., 6 PLCS. #6-32 WIRE CLAMPS ON .325 CNTRS., 8 PLACES .173" DIA. HOLE, 6 PLCS. GND N L 3.27" BOTTOM VIEW D.C. OUTPUT VIEW 1.900" 1.370 V1 GND V2 WEIGHT: 1.20 LBS. 28 V3 V4 SINGLE OUTPUT MODELS USE V1 PIN. Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com A.C. INPUT VIEW BVS-80 7.20" 0.25" 6.70" GND N L #6-32 WIRE CLAMPS ON .325 CNTRS., 8 PLACES 1.040" 1.80" SIDE VIEW D.C. OUTPUT VIEW 0.510 .173" DIA. HOLE, 8 PLCS V1 #6-32 UNC THD., 8 PLCS V1 V2 GND V3 V4 SINGLE OUTPUT MODELS USE V. PINS 2.170" BVS-080 POWER FAIL CONNECTOR 3.230" BOTTOM VIEW 4.20" COM P.F. 1.020 POWER FAIL CONNECTORS MATE WITH MOLEX SERIES 2695 0.485" WEIGHT: 1.7 LBS. BVS-100 A.C. INPUT VIEW 1.49 L N GND INPUT & OUTPUT CONNECTORS .045" SQ. PINS, 7 PLACES .156" PITCH, LOCKING RAMP MATES WITH MOLEX 2139 SERIES 9.0 D.C. OUTPUT VIEW 2.2 1.82 CL V1 V1 V2 8.62 .125 DIA. MTG. HOLES, 4 PLCS. GND V2 WEIGHT: 1.15 LBS. A.C. INPUT VIEW BVS-180 5.00 1.65 L N GND INPUT & OUTPUT CONNECTORS .045" SQ. PINS, 7 PLACES .156" PITCH, LOCKING RAMP MATES WITH MOLEX 2139 SERIES D.C. OUTPUT VIEW 5.50 4.50 V1 V1 GND V2 V2 AUX. OUTPUT VIEW D.C. OK #6-32 UNC THD., 4 PLCS. 4.00 WEIGHT: 1.30 LBS. GND REMOTE SENSE .025" SQ. PINS, 4 PLACES .100 PITCH, LOCKING, RAMP MATES WITH MOLEX 2695 SERIES Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com 29 WallTran The AC/AC Wall Plug-In Transformers Series: WPT • Provides safer, temper-proof low power source • Reduces size and weight of main product • Stock case color black, sides and front textured • Supplied with PowerVolt trademark; your company trademark on special order • Screw terminals standard; cord on special order • Input 120V AC standard; optional 230V AC input Output Part Number* Case Type Input Volts VA WPT-0506-X-Y 1 or 2 120 5 6 0.94 WPT-0509-X-Y 1 or 2 120 5 9 WPT-0510-X-Y 1 or 2 120 5 WPT-0512-X-Y 1 or 2 120 WPT-0516-X-Y 1 or 2 WPT-0520-X-Y WPT-0524-X-Y Output Case Input Type Volts VA WPT-1006-X-Y 1 or 2 120 10 6 1.60 0.52 WPT-1009-X-Y 1 or 2 120 10 9 1.10 10 0.58 WPT-1010-X-Y 1 or 2 120 10 10 1.00 5 12 0.47 WPT-1012-X-Y 1 or 2 120 10 12 0.84 120 5 16 0.35 WPT-1016-X-Y 1 or 2 120 10 16 0.63 1 or 2 120 5 20 0.29 WPT-1020-X-Y 1 or 2 120 10 20 0.50 1 or 2 120 5 24 0.17 WPT-1024-X-Y 1 or 2 120 10 24 0.42 Volts Part Number* Amps Volts Amps * In Part No. = X: Case Type, 1 or 2; Y: Cord Type 17/8” 43 /64” 115/32” 5 /16” 29/32” CAUTION DO NOT EXPOSE TO RAIN 1 /4” CASE TYPE 1; CORD OUTPUT 43 /64” MOUNTING TAB AVAILABLE ON SPECIAL ORDER 5 /32” 131/64” 9 /64” 7 /16” 5 /16” 23/16” CAUTION CASE TYPE 2 SCREW TERMINAL OUTPUT DO NOT EXPOSE TO RAIN LOAD 15 /32” 11 /16” 30 #6–32 SCREW (2) 11 /32” Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com 17/8” AC/DC Converters/Battery Chargers Wall Plug-in Series: WPC • High power, low voltage AC to DC converters and battery chargers • Non-filtered or filtered DC output • Substitutes the on-board power supply, reduces size and weight • Removes heat from sensitive circuitry, eliminates need for cooling devices • Provides a secure temper-proof power source • Reduces design time of the main product The WPC Series of converters is essentially a full wave DC power supply capable of operating at low voltage DC. The output may be filtered using a capacitor internal in the converter/charger. These converters are an economical alternative to provide power to products requiring low voltage non-filtered DC with resistive or inductive loads such as light bulbs, DC motors, solenoids, etc. The filtered output units are especially designed for battery operated products such as tape recorders, radios, calculators, etc. If the equipment utilizes nickel-cadmium batteries, the converter/ charger can be used to operate the equipment and charge the batteries through a dropping resistor at a constant current. The figure below shows a typical charging circuit for constant current charging. With the switch open, the batteries are charged through resistor (R) at a constant current. Non-filtered AC/DC Converter/Battery Chargers (For filtered output add suffix “F” to the part number) Part No.(*) 120 VAC 220 VAC DC Output Volts mA Case Size WPC30H50-1 WPC30H50-2 3.0 500 H WPC45F35-1 WPC60H20-1 WPC60H30-1 WPC45F35-2 WPC60H20-2 WPC60H30-2 4.5 6.0 6.0 350 200 300 F H H WPC60H40-1 WPC60H40-2 6.0 400 H WPC60J60-1 WPC60M120-1 WPC60M200-1 WPC60J60-2 WPC60M120-2 WPC60M200-2 6.0 6.0 6.0 600 1200 2000 J M M WPC75J150-1 WPC75J150-2 7.5 500 J WPC85H10-1 WPC85H10-2 8.5 100 H WPC90M90-1 WPC90M90-2 9.0 900 M WPC100J50-1 WPC100J50-2 10.0 500 J WPC120H20-1 WPC120H20-2 12.0 200 H WPC120J30-1 WPC120J50-1 WPC120M70-1 WPC120J30-2 WPC120J50-2 WPC120M70-2 12.0 12.0 12.0 300 500 700 J J M WPC140J35-1 WPC140J35-2 14.0 350 J WPC180J10-1 WPC180J10-2 18.0 100 J WPC200J28-1 WPC240H05-1 WPC200J28-2 WPC240H05-2 20.0 24.0 280 50 J H MODEL SERIES DUF DUH, AUH DUJ, DRJ, AUJ DRL, AUK DUM, AUM L 2.09 (53) 2.36 (60) 2.40 (61) 3.19 (81) 3.23 (82) Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com W 1.42 (36) 1.77 (45) 2.17 (55) 2.32 (59) 2.36 (60) H 1.50 (38) 1.65 (42) 1.61 (41) 2.05 (52) 1.89 (48) 31 Notes 32 Phone (630) 628-9999 • Fax (630)628-9922 • http://www.powervolt.com