Toggles Series EB TYPICAL SWITCH Pushbuttons Rockers EB20 11 B J23 C Contacts, Ratings, & Terminals Poles & Circuits 11 SPDT ON (ON) 65 SPDT ON ON 61 DPDT ON (ON) 85 DPDT ON ON ( ) = Momentary No Code Silver Contacts; Solder Lug Terminals 3A @ 125V AC Cap Colors A Black White G Gold Contacts; Solder Lug Terminals 0.4VA max @ 28V AC/DC max B C Red Silver Contacts; Straight PC Terminals; 3A @ 125V AC E Yellow P F Green PG Gold Contacts; Straight PC Terminals 0.4VA max @ 28V AC/DC max G Blue H Gray Rotaries Keylocks Programmable Illuminated PB Light Touch Miniature Pushbuttons Cap Extensions & Bezel Types Slides Low Rise IMPORTANT: Momentary Alternate Momentary Alternate J20 J30 J40 J50 Without Bezel J21 J31 J41 J51 Bezel without LED J22 J32 J42 J52 Bezel with 1 Round LED J23 J33 J43 J53 Bezel with 2 Round LEDs J24 J34 J44 J54 Bezel with 2 Rectangular LEDs Description Tilt Tactiles Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings, & ordering instructions are noted on the General Specifications page. High Rise DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITHOUT BEZEL Indicators Without Bezel Accessories Touch EB2011-A-J40 SPDT ON-(ON) Circuit Black Cap with High Rise Extension Supplement Silver Contacts & Solder Lug Terminals with 3-Amp Rating C30 www.nkk.com Series EB Toggles Light Touch Miniature Pushbuttons ORDERING EXAMPLES Rockers C F C Led Colors Programmable Illuminated PB Bezel Colors Bezel without LEDs A Black F Green B White G Blue C Red H Gray E Yellow Bezel with 1 Round LED Black C Red F Green Bezel with 2 Round or Rectangular LEDs Top LED Black Rotaries 2 LEDs Bottom LED C Red C Red E Yellow E Yellow F Green F Green Tilt Tactiles A Keylocks 1 LED Slides A Pushbuttons A DESCRIPTION FOR TYPICAL ORDERING EXAMPLE WITH BEZEL Black Bezel with 2 Round LEDs: Top LED Red Bottom LED Green Touch EB2011-B-J23ACF Accessories Indicators White Cap with Low Rise Extension SPDT ON-(ON) Circuit Supplement Silver Contacts & Solder Lug Terminals with 3-Amp Rating www.nkk.com C31 Series EB Toggles Light Touch Miniature Pushbuttons POLES & CIRCUITS Normal Normal Model SP EB2011 EB2065 ON ON (ON) ON 2-3 EB2061 EB2085 ON ON (ON) ON 2-3 5-6 C DP Keyway Throw & Switch Schematics Down Note: Terminal numbers are not actually on the switch. Keyway 2-1 2 (COM) SPDT 3 2-1 5-4 DPDT 1 2 3 (COM) 1 5 6 4 CONTACT MATERIALS, RATINGS, & TERMINALS Rotaries No Code Solder Lug Silver Contacts Power Level 3A @ 125V AC G Solder Lug Gold Contacts Logic Level 0.4VA maximum @ 28V AC/DC maximum Slides Complete explanation of operating range in Supplement section. Epoxy Seal (2.0) .079 (2.0) .079 Tactiles (4.0) (1.1) .157 .043 Thk (0.7) (0.5) Com .028 .020 P Straight PC Silver Contacts PG Straight PC Gold Contacts Tilt Touch Down Connected Terminals Pole Keylocks Programmable Illuminated PB Pushbuttons Rockers Plunger Position ( ) = Momentary Power Level 3A @ 125V AC Logic Level 0.4VA maximum @ 28V AC/DC maximum Indicators Complete explanation of operating range in Supplement section. PCB Footprints Accessories Single Pole Epoxy Seal (6.4) (4.3) .252 .169 (4.7) .185 3 Supplement (1.2) .047 Thk (0.7) (0.5) Com .028 .020 C32 Double Pole 2 (3.9) Typ .154 1 (1.8) Dia Typ .071 www.nkk.com 3 6 2 5 1 4 (3.9) Typ .154 (1.8) Dia Typ .071 Series EB Toggles Light Touch Miniature Pushbuttons CAP COLORS C Red E G Blue H Gray Yellow Rockers Green White CAP EXTENSIONS & BEZEL TYPES Low Rise Momentary (4.5) .177 (2.8) .110 Low Rise Alternate (11.5) Sq .453 (18.0) .709 (3.3) .130 (11.0) .433 (4.0) Typ .157 (7.0) .276 (18.0) .709 For Momentary Devices High Rise Cap Extension with Bezel (10.0) .394 Low Rise Momentary (4.5) .177 AT207 Bezel without LED E Maximum Panel Thickness .039” ~ .157” (1.0mm ~ 4.0mm) Cutout applies to SP & DP (2.8) .110 (2.1) .083 J31 (2.2) .087 (10.0) .394 Low Rise Alternate (4.5) .177 (2.8) .110 Black B White G Blue C Red H Gray Green (2.1) .083 (2.2) .087 J41 (10.0) .394 High Rise Momentary (3.4) .134 (2.8) .110 EB2011-A-J40 (3.2) .126 (2.2) .087 J51 (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (11.8) .465 Yellow F A (12.5) .492 (2.0) Typ .079 Single Pole (1.0) .039 (2.2) .087 J21 (2.8) .110 (3.4) .134 (15.0) .591 (14.0) .551 1 (11.0) .433 High Rise Alternate Material: Polycarbonate (15.0) .591 (2.2) .087 (12.0) .472 (15.6) .614 Finish: Glossy Tilt (12.2) .480 (4.5) .177 (2.8) .110 (11.0) .433 2 (0.5) .020 (2.8) .110 (3.4) .134 (3.4) .134 3 COM J50 (11.0) .433 High Rise Momentary (2.8) .110 (4.5) .177 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 Part No. J40 (11.0) .433 C (4.4) .173 Keylocks J30 (11.0) .433 (3.3) .130 Rotaries J20 (3.3) .130 Tactiles (2.2) .087 (12.5) .492 (21.5) .846 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP Touch Cap Extension without Bezel Pushbuttons F B Programmable Illuminated PB Black Slides A Factory Assembled on the Switch: Square snap-on cap AT465, snap-in mounter AT529, and optional bezels which follow. (0.5) .020 (21.5) .846 (15.6) .614 COM (1.0) .039 (2.2) .087 (10.0) .394 (2.8) .110 (4.5) .177 (4.5) .177 6 3 5 2 4 1 (4.0) Typ .157 (4.7) .185 (18.0) .709 For Momentary Devices Low Rise (11.0) .433 (14.0) .551 (2.0) Typ .079 Double Pole www.nkk.com Accessories (11.5) Sq .453 EB2061-B-J21A C33 Supplement (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 (3.9) Typ .154 Indicators Part No. Series EB Toggles Light Touch Miniature Pushbuttons CAP EXTENSIONS & BEZEL TYPES C (1.0) .039 (2.2) .087 J22 Low Rise Momentary AT208 Bezel with 1 Round LED (AT070 LED) A (10.0) .394 (11.8) .465 (19.0) .748 (13.5) .531 Black (6.25) .246 (2.2) .087 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (12.0) .472 Material: Polycarbonate Finish: Glossy (15.6) .614 (30.2) 1.19 (5.4) Dia .213 (5.4) Dia .213 (19.0) .748 (2.5) .098 (0.61) Sq .024 (1.1) x (2.0) Typ .043 x .079 (0.7) Typ .028 3 (3.9) Typ .154 COM Rotaries Slides Tactiles EB2011-B-J42AC 1 Cap Extension with Bezel (1.0) .039 (2.2) .087 J23 (4.5) .177 (2.1) .083 J33 (10.0) .394 Low Rise Momentary (2.2) .087 (10.0) .394 Low Rise Alternate (2.8) .110 (18.0) .709 For Momentary Devices (7.0) .276 (4.5) .177 (2.8) .110 (2.0) .079 Single Pole (2.1) .083 (2.2) .087 J43 (3.4) .134 (3.2) .126 (2.2) .087 J53 (10.0) .394 High Rise Momentary (12.0) .472 (10.0) .394 Tilt A (4.0) Typ .157 (4.5) .177 High Rise AT212 Bezel with 2 Round LEDs (AT617 LEDs) (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (2.8) .110 (15.0) .591 (2.2) .087 Black Material: Polycarbonate Finish: Glossy Indicators Touch (2.1) .083 (15.6) .614 (2.8) .110 (3.4) .134 (2.2) .087 (10.0) .394 (11.0) .433 (14.0) .551 2 (0.5) .020 (11.8) .465 LED colors and specifications on next to last page of this EB section. (15.0) .591 (11.5) Sq .453 (12.0) .472 (2.8) .110 (8.8) Dia .346 (13.8) .543 (30.2) 1.190 (13.5) .531 (3.4) .134 (12.5) .492 (15.3) Min .602 (4.9) .193 (10.0) .394 High Rise Alternate (2.8) .110 (3.4) .134 (3.2) .126 (2.2) .087 J52 (10.0) .394 High Rise Momentary (2.8) .110 (4.5) .177 (2.1) .083 (2.2) .087 J42 (2.2) .087 Low Rise Alternate (2.8) .110 (4.5) .177 (2.1) .083 J32 (10.0) .394 Keylocks Programmable Illuminated PB Pushbuttons Rockers Cap Extension with Bezel (8.0) .315 (10.0) .394 (7.8) .307 (11.8) .465 (21.5) Sq .846 (3.0) Dia Typ .118 LED colors and specifications on next to last page of this EB section. (18.4) .724 Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (1.1) x (2.0) Typ .043 x .079 (7.8) .307 (0.7) Typ .028 3 Supplement Accessories (8.0) .315 (12.0) .472 (3.9) Typ .154 (11.5) Sq .453 (0.5) .020 (3.0) Dia Typ .118 (11.8) .465 (21.5) Sq .846 EB2065-B-J33ACF C34 (2.2) .087 (10.0) .394 (2.1) .083 Low Rise www.nkk.com (2.8) .110 (4.5) .177 (4.5) .177 (18.0) .709 For Alternate Devices COM (11.0) .433 2 1 (4.0) Typ .157 (7.0) .276 (2.0) Typ .079 Single Pole (14.0) .551 Series EB Toggles Light Touch Miniature Pushbuttons CAP EXTENSIONS & BEZEL TYPES (10.0) .394 Low Rise Momentary (4.5) .177 (2.8) .110 J34 (10.0) .394 Low Rise Alternate (4.5) .177 (2.1) .083 (2.2) .087 J44 (2.2) .087 (10.0) .394 High Rise Momentary (2.8) .110 (3.4) .134 (2.8) .110 (3.2) .126 (2.2) .087 J54 High Rise Alternate (10.0) .394 (2.8) .110 (3.4) .134 AT213 Bezel with 2 Rectangular LEDs (AT618 LEDs) C (10.0) .394 Black (15.0) .591 (2.0) Typ .079 Material: Polycarbonate Finish: Glossy (10.0) .394 (12.0) .472 (8.0) .315 (2.2) .087 (7.8) .307 (11.8) .465 (18.4) .724 (7.8) .307 LED colors and specifications on next page of this EB section. Maximum Panel Thickness .039” ~ .126” (1.0mm ~ 3.2mm) Cutout applies to SP & DP (21.5) Sq .846 (5.0) Typ .197 Programmable Illuminated PB A (1.1) x (2.0) Typ .043 x .079 (0.5) .020 (5.0) Typ .197 (2.8) .110 (3.4) .134 (4.5) .177 2 4 1 (4.0) Typ .157 (18.0) .709 For Alternate Devices (2.0) Typ .079 Double Pole EB2085-B-J54ACF Tilt Tactiles High Rise (4.7) .185 (11.0) .433 (14.0) .551 Touch (3.2) .126 (2.2) .087 (10.0) .394 3 5 Indicators (11.8) .465 (21.5) Sq .846 6 Accessories (2.0) .079 COM Rotaries (3.9) Typ .154 (11.5) Sq .453 Supplement (12.0) .472 Keylocks (0.7) Typ .028 (8.0) .315 Rockers J24 (2.1) .083 Pushbuttons (1.0) .039 (2.2) .087 Slides Cap Extension with Bezel www.nkk.com C35 Series EB Toggles Light Touch Miniature Pushbuttons LED COLORS & SPECIFICATIONS AT617 LED For Bezel AT212 with 2 Round LEDs (5.08) Dia .200 (5.0) .197 (7.0) .276 (5.0) .197 Top LED Circuit Mark This Side Circuit Mark This Side Top LED Bottom LED (+) (-) (-) Bottom LED (+) (-) (+) Keylocks Note: Lead lengths may differ from manufacturing lot to lot. The longer lead is the anode (+). AT070 AT617 AT618 C F C E F C E F Color Red Green Red Yellow Green Red Yellow Green Maximum Forward Current IFM 25mA 30mA 30mA 30mA 25mA 25mA 30mA 25mA Typical Forward Current IF 20mA 20mA 20mA 20mA 20mA 20mA 20mA 20mA Forward Voltage VF 2.8V 2.1V 2.0V 2.1V 2.2V 2.25V 2.1V 2.2V Maximum Reverse Voltage VRM 4V 5V 5V 5V 5V 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.33 mA/°C 0.40 mA/°C 0.40 mA/°C 0.40 mA/°C 0.33 mA/°C 0.33 mA/°C 0.40 mA/°C 0.33 mA/°C (+) Rotaries Slides Tactiles (3.0) Dia .118 (7.7) .303 C AT618 LED For Bezel AT213 with 2 Rectangular LEDs Circuit Mark This Side AT070 LED For Bezel AT208 with 1 LED Programmable Illuminated PB Pushbuttons Rockers Bezel Orientation on Switch (-) Tilt Ambient Temperature Range (when used with a bezel) –10° ~ +70°C –15° ~ +70°C –25° ~ +70°C The electrical specifications shown are determined at a basic temperature of 25°C. LED circuit is independent of switch operation. LED is colored in OFF state. Supplement Accessories Indicators Touch If the source voltage is greater than the rated voltage of the LED, a ballast resistor must be connected in series with the lamp. The ballast resistor calculation and more lamp detail are shown in the Supplement section. C36 www.nkk.com Series EB Toggles Light Touch Miniature Pushbuttons LEGENDS Screen Print or Pad Print (9.98) Sq .393 (11.5) Sq .453 Epoxy based ink is recommended. AT465 (0.76) Typ .030 (0.76) Typ .030 (9.98) .393 (11.5) Sq .453 C (0.76) Typ .030 AT465 Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Shaded areas are printable areas. Supplement FILT AIR ER (4.61) Typ .181 (0.38) Typ .015 Recommended Print Method: Pushbuttons Suggested Printable Area for Cap Programmable Illuminated PB ON Rockers NKK Switches can provide custom legends for caps. Contact factory for more information. www.nkk.com C37