Toggles Series SK Rockers General Specifications Pushbuttons Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Programmable Illuminated PB Keylocks Rotaries Slides Tactiles Tilt Touch Part Number: SK14DGMG01 Other Ratings F Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Force: Contact Timing: Angle of Throw: 100 milliohms maximum 100 megohms minimum @ 500V DC 500V AC minimum between contacts for 1 minute minimum 30,000 operations minimum 10,000 operations minimum Withstands 15 kilovolts ESD 0.02Nm (0.18 lb•in) Break-before-make 45° Materials & Finishes Key: Brass alloy with bright nickel plating and ABS resin handle Housing:Polyamide Base: Glass fiber reinforced polyamide Rotor: Glass fiber reinforced polyamide Tumber Plate:Brass Movable Contacts: Beryllium copper with gold plating Stationary Contacts: Brass with gold plating Switch Terminals: Brass with gold plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: –40°C through +85°C (–40°F through +185°F) 90 ~ 95% humidity for 240 hours @ 60°C (140°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Manual Soldering: lead-free, see profile below. Do not exceed these specifications. Cleaning: Hand clean locally using alcohol based solution. Solder Iron Tip Temperature Time on Terminal Cycles Indicators Accessories Supplement Antistatic Snap-in Keylock Standards & Certifications F26 370°C 4 seconds 2 These devices have not been tested for UL recognition or CSA certification. These devices are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. www.nkk.com Series SK Toggles Antistatic Snap-in Keylock POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Connected Terminals Pos 1 Pos 2 Pos 3 Pos 1 Pos 2 Pos 3 = Key Removable = Maximum Arc Schematic Rockers Pole & Throw (Terminal numbers are on switch) C ON ON ON C-1 C-2 POS 1 C-3 1 2 3 Pushbuttons SP3T 2 3 AT4080 Standard Antistatic Plastic Handle (20.0) .787 (5.0) .197 Brass Alloy with Bright Nickel Plating & ABS Resin Handle (14.5) .571 (1.5) .059 2 keys supplied with each switch Programmable Illuminated PB KEY (10.1) .398 F Rotaries TYPICAL SWITCH DIMENSIONS Keylocks Key Positions 45° (14.4) .567 Part Number This Side (17.9) .705 (2.5) .098 C (6.4) .252 (10.2) .402 1 2 3 (14.4) .567 (22.7) .894 Tilt (18.0) Dia .709 (0.3) Typ .012 (1.8) Typ .071 POS 3 Tactiles POS 1 Slides POS 2 45° Touch PANEL CUTOUT (6.1) +0.2 –0.0 .240 (14.5) +0.2 –0.0 Dia .571 Indicators Panel Thickness Range .039” ~ .079” (1.0mm ~ 2.0mm) (19.0) min .748 +0.2 –0.0 (15.3) +0.2 –0.0 .602 Supplement R (1.1) .043 Accessories (14.6) +0.0 –0.1 .575 www.nkk.com F27