NCE N-Channel Enhancement Mode Power MOSFET

Pb Free Product
NCE1530C
http://www.ncepower.com
NCE N-Channel Enhancement Mode Power MOSFET
Description
The NCE1530C uses advanced trench technology and
design to provide excellent RDS(ON) with low gate charge. It
can be used in a wide variety of applications.
General Features
● VDS = 150V,ID =30A
RDS(ON) <72mΩ @ VGS=10V (Typ:62mΩ)
Schematic diagram
● High density cell design for ultra low Rdson
● Fully characterized avalanche voltage and current
● Good stability and uniformity with high EAS
● Excellent package for good heat dissipation
Application
● Boost converters
● LED backlighting
Marking and pin assignment
● Uninterruptible power supply
100% UIS TESTED!
100% ∆Vds TESTED!
TO-220-3L top view
Package Marking and Ordering Information
Device Marking
Device
Device Package
Reel Size
Tape width
Quantity
NCE1530C
NCE1530C
TO-220-3L
-
-
-
Absolute Maximum Ratings (TC=25℃unless otherwise noted)
Symbol
Parameter
Limit
Unit
VDS
Drain-Source Voltage
150
V
VGS
Gate-Source Voltage
±20
V
Drain Current-Continuous
30
A
Drain Current-Continuous(TC=100℃)
21
A
IDM
Pulsed Drain Current
65
A
PD
Maximum Power Dissipation
105
W
0.7
W/℃
306
mJ
-55 To 175
℃
ID
ID (100℃)
Derating factor
EAS
TJ,TSTG
Single pulse avalanche energy
(Note 5)
Operating Junction and Storage Temperature Range
Wuxi NCE Power Co., Ltd
Page 1
v1.0
Pb Free Product
NCE1530C
http://www.ncepower.com
Thermal Characteristic
Thermal Resistance, Junction-to-Case (Note 2)
RθJC
1.43
℃/W
Electrical Characteristics (TC=25℃unless otherwise noted)
Symbol
Parameter
Condition
Min
Typ
Max
Unit
Off Characteristics
BVDSS
Drain-Source Breakdown Voltage
VGS=0V ID=250μA
150
165
-
V
IDSS
Zero Gate Voltage Drain Current
VDS=150V,VGS=0V
-
-
1
μA
Gate-Body Leakage Current
VGS=±20V,VDS=0V
-
-
±100
nA
VGS(th)
Gate Threshold Voltage
VDS=VGS,ID=250μA
2.5
3.5
4.5
V
RDS(ON)
Drain-Source On-State Resistance
VGS=10V, ID=15A
-
62
72
mΩ
Forward Transconductance
VDS=5V,ID=10A
-
20
-
S
-
1650
-
PF
-
200
-
PF
-
70
-
PF
-
10.5
-
nS
IGSS
On Characteristics
(Note 3)
gFS
Dynamic Characteristics
(Note4)
Clss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Switching Characteristics
VDS=50V,VGS=0V,
F=1.0MHz
(Note 4)
td(on)
Turn-on Delay Time
tr
Turn-on Rise Time
VDD=75V,RL=5Ω
-
5.5
-
nS
Turn-Off Delay Time
VGS=10V,RGEN=3Ω
-
14.5
-
nS
-
3
-
nS
-
30
-
nC
-
7.5
-
nC
-
9.5
-
nC
VGS=0V,IS=30A
-
-
1.2
V
-
-
-
30
A
TJ = 25°C, IF = 10A
-
23
-
nS
(Note3)
-
35
-
nC
td(off)
tf
Turn-Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDS=75V,ID=20A,
VGS=10V
Drain-Source Diode Characteristics
VSD
IS
trr
Diode Forward Voltage (Note 3)
Diode Forward Current
(Note 2)
Reverse Recovery Time
Qrr
Reverse Recovery Charge
ton
Forward Turn-On Time
di/dt = 100A/μs
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Notes:
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. Surface Mounted on FR4 Board, t ≤ 10 sec.
3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.
4. Guaranteed by design, not subject to production
5. EAS condition:Tj=25℃,VDD=50V,VG=10V,L=0.5mH,Rg=25Ω
Wuxi NCE Power Co., Ltd
Page 2
v1.0
Pb Free Product
http://www.ncepower.com
NCE1530C
Test Circuit
1) EAS Test Circuit
2) Gate Charge Test Circuit
3) Switch Time Test Circuit
Wuxi NCE Power Co., Ltd
Page 3
v1.0
Pb Free Product
NCE1530C
http://www.ncepower.com
ID- Drain Current (A)
Normalized On-Resistance
Typical Electrical and Thermal Characteristics (Curves)
TJ-Junction Temperature(℃)
Vds Drain-Source Voltage (V)
Figure 4 Rdson-JunctionTemperature
ID- Drain Current (A)
Vgs Gate-Source Voltage (V)
Figure 1 Output Characteristics
Qg Gate Charge (nC)
Figure 2 Transfer Characteristics
Figure 5 Gate Charge
Is- Reverse Drain Current (A)
Rdson On-Resistance(mΩ)
Vgs Gate-Source Voltage (V)
ID- Drain Current (A)
Vsd Source-Drain Voltage (V)
Figure 3 Rdson- Drain Current
Wuxi NCE Power Co., Ltd
Figure 6 Source- Drain Diode Forward
Page 4
v1.0
Pb Free Product
NCE1530C
C Capacitance (pF)
Power Dissipation (W)
http://www.ncepower.com
TJ-Junction Temperature (℃)
Figure 7 Capacitance vs Vds
Figure 9 Power De-rating
ID Current (A)
ID- Drain Current (A)
Vds Drain-Source Voltage (V)
TJ-Junction Temperature(℃)
Figure 8 Safe Operation Area
Figure 10ID Current- Junction Temperature
r(t),Normalized Effective
Transient Thermal Impedance
Vds Drain-Source Voltage (V)
Square Wave Pluse Duration(sec)
Figure 11 Normalized Maximum Transient Thermal Impedance
Wuxi NCE Power Co., Ltd
Page 5
v1.0
Pb Free Product
NCE1530C
http://www.ncepower.com
TO-220-3L Package Information
Symbol
Dimensions In Millimeters
Dimensions In Inches
Min.
Max.
Min.
Max.
A
4.400
4.600
0.173
0.181
A1
2.250
2.550
0.089
0.100
b
0.710
0.910
0.028
0.036
b1
1.170
1.370
0.046
0.054
c
0.330
0.650
0.013
0.026
c1
1.200
1.400
0.047
0.055
D
9.910
10.250
0.390
0.404
E
8.9500
9.750
0.352
0.384
E1
12.650
12.950
0.498
0.510
e
2.540 TYP.
0.100 TYP.
e1
4.980
5.180
0.196
0.204
F
2.650
2.950
0.104
0.116
H
7.900
8.100
0.311
0.319
h
0.000
0.300
0.000
0.012
L
12.900
13.400
0.508
0.528
L1
2.850
3.250
0.112
0.128
V
Φ
Wuxi NCE Power Co., Ltd
7.500 REF.
3.400
0.295 REF.
3.800
Page 6
0.134
0.150
v1.0
Pb Free Product
http://www.ncepower.com
NCE1530C
Attention:
■
■
■
■
■
■
■
■
■
Any and all NCE power products described or contained herein do not have specifications that can handle applications that
require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications
whose failure can be reasonably expected to result in serious physical and/or material damage. Consult
with your NCE power representative nearest you before using any NCE power products described or contained herein in
such applications.
NCE power assumes no responsibility for equipment failures that result from using products at values
that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters)
listed in products specifications of any and all NCE power products described or contained herein.
Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics,
and functions of the described products in the independent state, and are not guarantees of the performance, characteristics,
and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states
that cannot be evaluated in an independent device, the customer should always evaluate and test
devices mounted in the customer’s products or equipment.
NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could
cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe
design, redundant design, and structural design.
In the event that any or all NCE power products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported without
obtaining the export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission
of NCE power Semiconductor CO.,LTD.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power
product that you intend to use.
This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice.
Wuxi NCE Power Co., Ltd
Page 7
v1.0