PRODUCT INFORMATION swiss world connects IP0002.00 BOARD-TO-BOARD 3-WAY SPRINGLOADED CONNECTOR USED AS AN RF INTERFACE 1. Description and general features General description Low profile 3-way spring-loaded connector with limited board spacing. This connector is connecting two printed circuit boards with three 3.5mm height spring-loaded contacts. Maximum stroke is 1.0mm. Product is supplied in tape and reel packaging. The challenge was to replace a fragile stamped and formed coax connector with a very low profile highreliable connector and uses minimal space. Advantages Main advantage of this connector is its small size and high performances especially under vibrations. Optimal connection between two PCB: spring-loaded connector compensates errors of parallelism and coplanarity. Connector can easily be positioned on the board with a pick-and-place vacuum system. Applications This connector is used as an RF interface for cellular wireless communication modules used in mobile computing or M2M industrial in automotive applications. High-frequency signal is transmitted to and from the antenna through this 3-way connector placed between two boards. Pin arrangement is optimized to transmit RF antenna signals up to 3 GHz. Optional versions Current version can be modified to meet with your specific requirements. Plastic carrier and contacts can easily be adapted to fit your application. 1 2. Technical Specifications Mechanical Characteristics Environtmental Operating temperature -55 ... + 85°C Max. stroke 1 mm Climatic category (IEC) 55 / 85 / 21 Forces 0.2 N initial, 0.7 N at ½ stroke Solderability 235°C, 5s Mechanical life Min. 50'000 cycles Resistance to soldering heat 280°C, 10s Coplanarity SMD terminations Max. 0.1 mm Electrical Characteristics Materials Machined brass, Gold plated 0.5 μm over 2.5 μm Ni Operating voltage 100 VRMS / 150 VDC Spring Spring steel wire EN10270-1 Continuous operating current Max. 1 A per terminal Insulator Glass filled polyester PCT-GF30-Fr, self-extinguishing UL94V-0, colour black Contact resistance Max. 10 mΩ (static measurement, half-way position) Insulation resistance Min. 10'000 MΩ (after climatic tests) Dielectric strength 500 VRMS Air and creepage distances 0.50 mm Capacitance 1 pF max. Contact barrel and piston 3. Ordering Information Order Code Numbers Part number: 9PM-SS-0003-02-248 Packaging Information T&R packaging: 2'400 pcs / reel 12'000 pcs /box AVAILABILITY On request, MOQ 1 reel 2'400 pcs Tape Specification 4. TECHNICAL DRAWINGS Reference point PCB Layout Connector 9PM-SS-0003-02-248 2