PI3B16234 3.3V, Low Capacitance 16-Bit to 32-Bit Mux/DeMux NanoSwitch™ Features Description • • • • • • • • • • Pericom Semiconductor’s PI3B16234 is a 16-bit to 32-bit Mux/ DeMux switch. Industry leading advantages include almost zero propagation delay of 500ps because of 8-ohm channel resistance and low I/O capacitance. A1 port demultiplexes to either port B1 or B2. The switch is bidirectional. RON is 8-ohm (typ.) Pulldown on B Ports Low Power: 1mW Industrial Operation Temperature: –40ºC to 85ºC Near-Zero Propagation Delay Switching Speed: 4.5ns (max.) Channel on capacitance: 11pF (typ.) VCC Operating Range: 3.3V±10% >100 MHz Bandwidth Packaging (Pb-free & Green available) : – 56-pin 240-mil wide plastic TSSOP (A) Application • Memory Switching Block Diagram 1A1 Pin Configuration SW 1B1 NC 1 2 56 2B1 3 54 53 3B1 4 5 4A1 6 7 1B1 2A1 SW 1B2 4B1 16A1 SW GND 5B1 6B1 6A1 7B1 8B1 8A1 9B1 10B1 10A1 11B1 12B1 12A1 VCC 13B1 14B1 14A1 15B1 16B1 16A1 SEL 16B1 SW 16B2 SW A SEL B SEL Function Table SEL FUNCTION L nΑl to nΒl H nΑl to nΒ2 8 55 52 51 50 49 9 10 48 11 12 13 46 14 15 16 43 42 41 17 18 40 39 19 20 21 38 37 36 22 23 24 35 34 33 25 26 32 31 27 28 30 29 47 45 44 VCC 1A1 1B2 2B2 3A1 3B2 4B2 GND 5A1 5B2 6B2 7A1 7B2 8B2 9A1 9B2 10B2 11A1 11B2 12B2 GND 13A1 13B2 14B2 15A1 15B2 16B2 NC Note: n = 1–16 06-0223 1 PS8388G 01/02/07 PI3B16234 3.3V, Low Capacitance 16-Bit to 32-Bit Mux/Demux NanoSwitch Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Storage Temperature ...................................................... –65°C to +150°C Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Ambient Temperature with Power Applied ...................... –40°C to +85°C Supply Voltage Range ....................................................... –0.3V to +4.6V DC Input Voltage ............................................................... –0.5V to +4.6V DC Output Current ........................................................................ 120mA Power Dissipation ............................................................................. 0.5W DC Electrical Characteristics (VCC = 3.3V ±10%, TA = –40ºC to 85ºC) Parame te rs D e s cription Te s t Conditions M in. Typ(1) M ax. VIH TTL Input HIGH Voltage 2.0 VIL Input LO W Voltage –0.5 0.8 IIH Input High Current –1 1 IIL Input Low Current –1 1 RON IO Switch O N Resistance VCC = Min., VIN = 0.0V, ION = 12mA VCC = Min., VIN = 2.4V, ION = 8mA B Port Pulldown Current VCC = Min., VO = VCC SEL = HIGH for B1, SEL = LO W for B2 CIN Input Capacitance CON A/B Capacitance, Switch O n ICC Power Supply Q uiescent Supply current per inupt @ TTL HIGH ΔICC SEL 8 12 12 23 2.5 VIN = 0V Units V μA Ω mA 2.6 3 .3 11 14 VCC = Max, VIN = 3V pF 20 μA 2 .5 mΑ Notes: 1. Typical values are shown at VCC = 3.3V, +25ºC ambient and maximum loading. AC Electrical Characteristics (VCC = 3.3V ±10%, TA= –40ºC to 85ºC) Parame te rs tPLH tPHL tPE tPD De s cription Propagation Delay Bus Disable Te s t Condition M in. CL = 25pF, RL = 500- ohm(1) CL = 25pF, RL = 500- ohm 1.3 Typ. M ax. Units 500 ps 4.5 ns Notes: 1. Guaranteed by design. 06-0223 2 PS8388G 01/02/07 PI3B16234 3.3V, Low Capacitance 16-Bit to 32-Bit Mux/Demux NanoSwitch Applications Information Logic Inputs The logic control inputs can be driven up to +3.6V regardless of the supply voltage. For example, given a + 3.3V supply, IN may be driven low to 0V and high to 3.6V. Driving IN Rail-to-Rail® minimizes power consumption. Power-Supply Sequencing and Hot-Plug Information Proper power-supply sequencing is recommended for all CMOS devices. Always apply VCC and GND before applying signals to input/output or control pins. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. Packaging Mechanical: 56-pin 240-mil wide plastic TSSOP (A) Ordering Information Ordering Code PI3B16234A PI3B16234AE Package Code A A Package Type 56-pin TSSOP Pb-free & Green, 56-pin TSSOP Notes: • Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ • E = Pb-free & Green • Adding an X suffix = Tape/Reel Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com 06-0223 3 PS8388G 01/02/07