Datasheet

KK Series 2.5V CMOS kHz Crystal Oscillator
3.2 x 2.5mm
KK
2.5V CMOS 32.768kHz
KN Series Real Time Clock Oscillator
7.0x5.0mm (XO)
3.2 x 2.5mm Ceramic SMD
Package: (Dimensions are in mm)
Product Features
Recommended Land Pattern:
•32.768 kHz
•2.5V CMOS compatible logic levels
•Low power standby mode (< 10µA)
•Low power active mode (< 0.25mA typ.)
•Designed for standard reflow and washing
techniques
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
•Pb-free and RoHS/Green compliant
Product Description
Pin Functions:
The KK Series is a real time clock oscillator that
achieves superb stability over a broad range
of operating conditions. The output clock
signal is compatible with LVCMOS/LVTTL logic
levels. The device, available on tape and reel,
is contained in a 3.2 x 2.5mm surface-mount
ceramic package.
Pin
Function
1
OE Function
2
Ground
3
Clock Output
4
V DD
Applications
Real-Time Clock Oscillator
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
Part Ordering Information:
KN
K XXX YYYY
YYYY = Specification�Code
XXX = Frequency�Code
Product�Family
Following the above format, SaRonix-eCera part numbers will be assigned upon
confirmation of exact customer requirements.
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
11-0036
All specifications are subject to change without notice.
KK 2.5V REV B
2011_DEC 07
1
2.5V CMOS 32.768kHz
KK
KK Series 2.5V CMOS kHz Crystal Oscillator
3.2 x 2.5mm
Electrical Performance
Parameter
Min.
Typ.
Output Frequency
Max.
Units
32.768
Supply Voltage
+2.375
kHz
+2.625
V
0.25
0.4
mA
15 pF load
10
µA
Output Hi-Z
±20 to ±50
ppm
See Note 1 below
Supply Current, Standby Mode
Frequency Stability
-20
+70
-40
+85
Output Logic 0, VOL
Output Logic 1, VOH
As specified
°C
As specified
0.1 VDD
V
15
pF
See Note 2 below
55
%
measured 50% of V DD
15
ns
measured 10/90% of V DD
0.9 V DD
V
Output Load
Duty Cycle
As specified
+2.50
Supply Current, Output Enabled
Operating Temperature Range
Notes
45
Rise and Fall Time
Notes:
1. As specified. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance
(25°C), aging (1 year at 25°C average effective ambient temperature), shock and vibration.
2. For specifications other than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Min.
Input Voltage (pin 1), Output Enable
Typ.
Max.
Units
0.7 V DD
Input Voltage (pin 1), Output Disable (low power standby)
0.3 V DD
Internal Pullup Resistance
470
Notes
V
or open
V
Output is Hi-Z
kΩ
Output Disable Delay
100
ns
Output Enable Delay
10
ms
Absolute Maximum Ratings
Parameter
Storage Temperature
Min.
Typ.
-55
Max.
Units
+125
°C
Notes
For the latest product information visit: http://www.pericom.com/products/timing/oscillators/KK2.5/
For test circuit go to: http://www.pericom.com/pdf/sre/tc_cmos2.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_3225_xo.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
11-0036
All specifications are subject to change without notice.
KK 2.5V REV B
2011_DEC 07
2