SaRonix Crystal Clock Oscillator 5V, HCMOS Technical Data NTH / NCH Series Frequency Range: 500 kHz to 106.25 MHz Frequency Stability: *See Part Numbering Guide ±20*, ±25, ±50 or ±100 ppm over all conditions: calibration tolerance, operating temperature, input voltage change, load change, 30 day aging, shock and vibration. Temperature Range: Operating: Storage: 0 to +70°C or -40 to +85°C -55 to +125°C Supply Voltage: Recommended Operating: +5VDC ±10% Supply Current: ACTUAL SIZE Description A 5V crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications, such as Gigabit Ethernet and Fibre Channel. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case, to reduce EMI. True SMD DIL 14 version also available, utilizing new adaptor technology (see separate data sheet for package dimensions) Applications & Features • • • • • • • • • • ADSL, DSL DS3, ES3, E1, STS-1, T1 Ethernet Switch, Gigabit Ethernet Fibre Channel Controller MPEG Network Processors Voice Over Packet 32 Bit Microprocessors Tri-State output on NTH True SMD version available, see part number builder for package option 0.5 to 8 MHz: 8+ to 24 MHz: 24+ to 50 MHz: 50+ to 80 MHz 80+ to 106.25 MHz: Output Drive: Symmetry: HCMOS Rise & Fall Times: Logic 0: Logic 1: Load: RMS Period Jitter: TTL Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: RMS Period Jitter: 12mA 20mA 35mA 50mA 65mA measured @ 50%VDD, See Part Numbering Guide 8ns max, 0.5 to 24 MHz, 20% to 80% V DD 5ns max, 24+ to 80 MHz 2ns max, 80+ to 106.25 MHz 10% VDD max 90% VDD min 50pF to 50MHz, 30pF 50+ to 70 MHz, 15pF 70+ to 106.25 MHz 8ps max measured @ 1.5V level, See Part Numbering Guide 6ns max, 0.5 to 24 MHz, 0.5 to 2.5V 3ns max, 24+ to 80 MHz 1.5ns max, 80+ to 106.25 MHz 0.5 V max VCC -0.6V min 10TTL to 50MHz, 5TTL 50+ to 106.25 MHz 8ps max Mechanical: Shock: Solderability: Terminal Strength: Vibration: Solvent Resistance: Resistance to Soldering Heat: Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 2004, Conditions B2 MIL-STD-883, Method 2007, Condition A MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition A, B or C ( I or J for Gull Wing and SMD) MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Output Waveform Tri-State Logic Table (NTH only) CMOS Tr TTL Tf Tr Tf VDD 1 Level 80% V DD 50% VDD 2.5 VDC 1.5 VDC 0.5 VDC 20% VDD 0 Level GND SYMMETRY Pin 1 Input Logic 1 or NC Logic 0 or GND Output: Output: Internal Pullup Resistance Control Input: Pin 8 (5) Output Oscillation High Impedance Required Input Levels on Pin 1: Logic 1 = 3.0 V min Logic 0 = 0.5V max Oscillation @ VIN, 2.2V min High Impedance @ VIN, 0.8V max 50KΩ min Disable Output Delay: 100ns max SYMMETRY DS-104 SaRonix http://www.pericom.com/saronix REV F SaRonix Crystal Clock Oscillator 5V, HCMOS Technical Data NTH / NCH Series Package Details Part Numbering Guide N T H 0 6 0 B – 24.0000 (T) FULL SIZE PACKAGE 21.0 max .825 0.91 .036 max 5.08 max .200 .46±.08 .018±.003 6.35±.51 .250±.020 15.24±.13 .600±.005 Pin 1 Tri-State - NTH N/C - NCH Pin 7 GND 12.19±.13 .480±.005 4.57±.13 .180±.005 13.0 max .510 (4) Glass Insulators Pin 14 VDC Series NTH = Tri-State NCH = Pin1 N/C Packing Method (T) = Tape & Reel, SMD versions full reel increments only (200pcs) Blank = Bulk Symmetry / Temperature Range 0 = 40/60%, 0 to +70°C (CMOS / TTL) 2 = 40/60%, -40 to +85°C (CMOS / TTL) A = 45/55%, 0 to +70°C, 0.5 to 70 MHz (CMOS) 6 = 45/55%, 0 to +70°C, 0.5 to 50 MHz (TTL) C = 45/55%, -40 to +85°C, 0.5 to 50 MHz (CMOS) 4 = 45/55%, -40 to +85°C, 0.5 to 40 MHz (TTL ) Frequency Range 3 = 0.5 to 6 MHz 6 = 6+ to 24 MHz 8 = 24+ to 106.25 MHz Frequency (MHz) Stability Tolerance C = ±100ppm B = ±50ppm A = ±25ppm, 0 to +70°C only AA = ±20ppm, 0 to +70°C only Package 0 = Full Size, Thru Hole 9 = Half Size, Thru Hole S = Full Size, True SMD Adaptor (see product photo) K = Full Size, Gull Wing J = Half Size, Gull Wing N = Half Size, Gull Wing, Spanked Leads 7.75 max .305 Pin 8 Output Marking Format ** Includes Date Code, Frequency, Part Number SARONIX Test Circuits TEST POINT Denotes Pin 1 mA M HALF SIZE PACKAGE VCC 10.87 max .428 Pin 1 (1) * Pin 7 (4) 6.35±.051 0.25±0.02 1.5 .059 CL = see specs on previous pg (Note A) GND 5.08 max .200 7.62±.20 .300±.008 OUT OSCILLATOR VM POWER SUPPLY 0.91 max .036 .46±.08 .018±.003 Pin 1 Tri-State - NTH N/C - NCH Pin 8 (5) Pin 14 (8) 13.0 max .510 TRI-STATE INPUT (NTH only) NOTE A: CL includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package Pin 4 GND HCMOS (Used at SaRonix) 120° 13.0 .510 max 120° 120° 7.62±.20 .300±.008 TEST POINT mA M Pin 8 VDC 1.7 .067 6.0 .236 Marking Format ** Includes Date Code, Frequency, Part Number Pin 14 (8) Pin 5 Output Pin 8 (5) OUT VCC POWER SUPPLY RL = 390Ω CL = 15 pF (Note A) OSCILLATOR VM MMBD7000 or Equiv GND Pin 1 (1) * Pin 7 (4) SARONIX TRI-STATE INPUT (NTH only) Denotes Pin 1 NOTE A: C L includes probe and fixture capacitance *( ) Indicates pin numbers for half-size package TTL (Optional load) ** Exact location of items may vary All specifications are subject to change without notice. mm Scale: None (Dimensions in ) inches SaRonix DS-104 http://www.pericom.com/saronix REV F SaRonix True SMD Adaptor - 7.57mm High Technical Data REV A SaRonix http://www.pericom.com/saronix