PLX Technology, Inc. Product Overview ® ExpressLane™ PCI Express ™ Switches and Bridges PLX Technology’s ExpressLane product PCI Express product line. The PLX PCI ExpressLane product line features PCI Express forward/reverse bridges with non-transparent bridge function and fully-configurable switches with support for flexible port configurations and non-transparent bridge function. Supported PCI Express features include ECRC, lane reversal, polarity reversal, auto negotiation, advanced error reporting and hot plug. PLX PCI Express products are fully-compliant with PCI Express Base 1.0a and 1.1 specifications. PCI Express Switches • • • • • • • • • Highly flexible port configurations Host-centric data transfer Low latency transfers, under 150 ns Non-transparent port capability Peer-to-peer data transfer Up to two virtual channels Advanced error reporting Hot Plug support Fully non-blocking switch fabric • 8 lanes configurable on 5 ports • Optional ECRC/Poison Bit • Vaux, Wake#, Beacon support • Lane/Polarity reversal • I2C configuration option • VGA/ISA-enable registers • Spread spectrum & constant clock • 19 x 19 mm² PBGA • 2.8 max power PEX 8516* • • • • • Highly flexible port configurations Non-transparent port capability Peer-to-peer data transfer Two virtual channels per port Advanced error reporting capability • • • • • Hot plug support on all ports Fully non-blocking switch fabric 16 lanes configurable in 4 ports Flexible x1, x2, x4, x8 ports 27 x 27 mm2 PBGA PEX 8517** • • • • • • • • • Highly flexible port configurations Low latency transfers, under 150 ns Non-transparent port capability Host-centric data transfer Peer-to-peer data transfer Up to two virtual channels Advanced error reporting Hot Plug support Fully non-blocking switch fabric • • • • • • • 16 lanes configurable on 5 ports Optional ECRC/Poison Bit Lane/Polarity reversal VGA/ISA-enable registers Pin compatible with PEX 8516 27 x 27 mm² PBGA 3.8 max power PEX 8518 • • • • • • • • • Highly flexible port configurations Low latency transfers, under 150 ns Non-transparent port capability Host-centric data transfer Peer-to-peer data transfer Up to two virtual channels Advanced error reporting Hot Plug support Fully non-blocking switch fabric • 16 lanes configurable on 5 ports • Optional ECRC/Poison Bit • Vaux, Wake#, Beacon support • Lane/Polarity reversal • I2C configuration option • VGA/ISA-enable registers • Spread spectrum & constant clock • 23 x 23 mm² PBGA • 3.5 max power PEX 8524 • • • • • Highly flexible port configurations Non-transparent port capability Peer-to-peer data transfer Two virtual channels per port Advanced error reporting capability • • • • • Hot plug support on all ports Fully non-blocking switch fabric 24 lanes configurable on 6 ports Flexible x1, x2, x4, x8, x16 ports 31 x 31 mm 2 PBGA PEX 8532 • • • • • Highly flexible port configurations Non-transparent port capability Peer-to-peer data transfer Two virtual channels per port Advanced error reporting capability • • • • • Hot plug support on all ports Fully non-blocking switch fabric 32 lanes configurable in 8 ports Flexible x1, x2, x4, x8, 16 ports 35 x 35 mm 2 PBGA PEX 8508 isolation isolation * Not recommended for new designs – please use PEX8518 for new designs ** Recommended only for designs migrating from PEX8516 – please use PEX8518 for new designs PCI Express Bridges Key Features and Specifications PEX 8111 • • • • • Low power and small package Forward and reverse bridging Link and device power management 8K shared RAM VGA-enable support • • PEX 8114 • • • • • • Forward and reverse bridging Non-transparent bridging Advanced error reporting capability Hot plug support Link and device power management Low power and small package • • • • 4 lane, PCI Express to PCI-X bridging and vice versa Package: 17 x 17 mm² PBGA, 2.0W max. power Flexible x1, x2, x4 PCI Express port Flexible 66, 100 and 133MHz PCI-X or 25, 33, 50 and 66MHz PCI PEX 8311 • • • • • • Converts Local Bus data to/from PCIe Root Complex and EndPoint support R1.0a compliant x1-lane PCIe Port 8/16/32-bit, up to 66MHz Local Bus Zero wait state bursts to 264 MBps Read ahead & prog. pre-fetch counter Two DMA channels Demand Mode, block and scatter/gather Direct Master & Direct Slave Modes • • • • • • Integrated SerDes Eight mailbox/two doorbell registers 128 Byte maximum payload Basic error reporting Polarity reversal On-the-fly Endian swapping Four GPIO pins 21 x 21 mm² PBGA 1.0W; all device/link power states • • • • • • • • • PCI Express to PCI bridging and vice versa Package: 13 x 13 mm2 standard BGA, or alternate 10 x 10 mm2 fine pitch BGA 400 mW power consumption Single PCIe lane; x1 PCIe port 32-bit, 66MHz PCI bus interface FastLane™ PCI and PCI-X Bridges PLX Technology’s FastLane PCI 6000 Series delivers the industry’s broadest set of PCI-to-PCI Bridges. The PLX FastLane PCI and PCI-X family of interconnect devices include PCI-to-PCI and PCI-X to PCI-X bridging devices, offer system designers many distinct features. These include performance enhancements such as smart prefetch, flow-through, 1-clock latency mode, and the industry s largest FIFOs, along with 33MHz PCI Products PCI 6140 PCI 6152 Key Features and Specifications • • • • • • 32-bit, 33MHz PCI Low power (200mW) Low cost Small footprint Low latency (1 clock) 128-pin 23 x 17 mm2 PQFP • • • • • • 32-bit, 33MHz and 32-bit/66MHz Low power (330mW) Low cost Smallest footprint EEPROM support 160-pin 32 x 32 mm2 PQFP or 160-pin 15 x 15 mm2 TBGA 133MHz PCI-X Products Key Features and Specifications PCI 6520 • • • • • • • PCI-X 133MHz Transparent mode Asynchronous operation CompactPCI Hot Swap compliant Large FIFO (10KB) EEPROM support 380-pin 27 x 27 mm2 PBGA • • PCI-X 133MHz Transparent, Non-transparent and Universal modes Asynchronous operation CompactPCI Hot Swap compliant Large FIFO (10KB) EEPROM support 380-pin 27 x 27 mm2 PBGA PCI 6540 asynchronous bridging and Non-transparent mode. The FastLane PCI and PCI-X bridges were designed to provide high-performance interconnect for servers, storage, telecommunications, networking and embedded applications. 66MHz PCI Products PCI 6150 • • • • • • • 32-bit, 66MHz PCI Asynchronous operation Large FIFO (1KB) 9 Master support EEPROM support CompactPCI Hot Swap compliant 208-pin 31 x 31 mm2 PQFP or 256-pin 17 x 17 mm2 PBGA PCI 6466 • • 64-bit, 66MHz PCI Transparent, non-transparent and universal modes Asynchronous operation I-temp operation (-40º C to +85º C) Large FIFO (10KB) Low Power (1 watt) 380-pin 27 x 27 mm2 PBGA • • • • • PCI 6254 • • • • • Key Features and Specifications PCI 6154 • • • • • Transparent, non-transparent and universal modes Asynchronous operation CompactPCI Hot Swap compliant Large FIFO (1KB) EEPROM support 365-pin 31 x 31 mm2 PBGA • • • • • • 64-bit, 66MHz PCI Asynchronous operation Large FIFO (1KB) 9 Master support EEPROM support 304-pin 31 x 31 mm2 PBGA • PCI 9000 Series of I/O Accelerators PLX Technology’s PCI 9000 Series offers the most advanced, broadest range of general-purpose, PCI-to-local bus bridges available. PLX Technology offers two types of I/O Accelerators: Targets and Masters. PCI Target I/O Accelerators support Direct Slave operations, allowing PCI bus master devices to access memory and other slave devices on a local bus. These 32-bit, 33MHz products include the PCI 9052 and PCI 9030. The PLX PCI Bus Master I/O Accelerators support Direct Slave operation, plus they add support for Direct Master operation, allowing processor/local bus master devices to access memory 66MHz PCI Controllers 64-bit Masters PCI 9656 32-bit Masters PCI 9056 33MHz PCI Controllers 32-bit PCI Masters PCI 9054 32-bit Slaves PCI 9052 Key Features and Specifications • • • • • 64-bit PCI bandwidth for 32-bit local bus applications 66 MHz PowerQUICC™ and generic local bus interface options Two DMA Channels Hot Swap compliant 256-pin 27 x 27 mm2 PBGA • • • • • 32-bit, 66MHz bus mastering I/O accelerator for embedded applications 66 MHz PowerQUICC and generic local bus interface options Two DMA Channels Hot Swap compliant 256-pin 17 x 17 mm2 PBGA Key Features and Specifications • • • • • 32-bit, 33MHz, PCI r2.2 bus mastering I/O Accelerator for embedded applications Motorola MPC860 PowerQUICC support for communications and applications Generic local buses support general-purpose, data-intensive applications Supports 3.3V and 5V I/O signaling 176-pin 24 x 24 mm2 PQFP and 225-pin 24 x 24 mm2 PBGA • • 32-bit, 33MHz PCI r2.2 slave (target) I/O Accelerator for embedded applications Generic local busses (muxed and de-general address/data buses) support general-purpose, data-intensive applications Ideal for conversion of legacy bus designs to PCI bus designs Supports 8-, 16- and 32-bit local bus devices 160-pin 31 x 31 mm2 PQFP • • • PCI 9030 and other devices on the PCI bus. In addition, they support DMA, allowing masters on either bus to direct the chip to perform data transfers. The PCI Bus Master I/O accelerators from PLX Technology are ideal for intelligent peripheral devices and embedded hosts. The bus master products are available in 64-bit, 66MHz; 32-bit, 66MHz and 32-bit, 33MHz formats. These include the PCI 9656, PCI 9056 and the PCI 9054. • • • • • • 32-bit, 33MHz PCI r2.2 slave (target) I/O accelerator for embedded applications Generic local busses (muxed and de-general address/data buses) support general-purpose, data-intensive applications Ideal for universal adapter designs and small form factors Supports 8-, 16- and 32-bit local bus devices Supports 3.3V and 5V I/O signaling 176-pin 24 x 24 mm2 PQFP and 180-pin 12 x 12 mm2 µBGA NetChip™ USB Controllers PLX Technology’s NetChip™ USB device controllers are among the highest performing and lowest power Hi-Speed USB 2.0 solutions available. PLX Technology offers a complete line of USB 2.0 peripheral controller solutions. Our products emphasize superior performance, strict compliance to industry standards, and dramatic power savings. These controllers feature diverse, programmable interfaces to gluelessly connect to various applications. Our PCI-based reference design kits offer easy NET 2272 Local Bus-toUSB 2.0 Hi-Speed Peripheral Controller • • • • • • • • NET 2280 PCI to Hi-Speed USB 2.0 Controller • • • • • • • • • NET 2282 PCI-to-USB 2.0 Hi-Speed Device Controller • • • • • • • • • PC-based development with many application, driver, and firmware examples, supporting Windows, Linux, VxWorks, and WinCE. PLX’s USB products are used extensively in printers, portable media players, GPS navigation system, Notebook and Ultra Mobile PCs, TV tuners, WLAN devices, mobile phones, and digital camcorders. Low power and small packaging make it ideal for bus or battery-powered devices Fastest sustained transfer rate, up to 40MBytes/sec Flexible I/O voltage range from 1.8V to 5V Low power process (186mW active, 8.1µW standby) Smallest packaging (6 x 6 mm² Lead-Free BGA package) Dynamic Virtual Endpoint Technology“ actualizes 30 independent USB endpoints Configurable CPU interface WinXP, Vista, Linux, and WinCE support PCI 33MHz / 32 Bit Interface Instantly add a Hi-Speed USB 2.0 peripheral port into any PCI-based systems USB Duet Technology, add Hi-Speed USB 2.0 peripheral functionality to laptop PCs and Ultra Mobile PCs Ideal for PCI embedded systems like printers and test instruments 4 DMA controllers with Scatter Gather descriptor capability USB Auto-Enumeration Firmware available to support many standard USB Classes (Printer, Mass Storage, MTP, Video, Audio, etc.) Small packaging (8 x 8 mm² Lead-Free BGA package) WinXP, Vista, Linux, and WinCE support Optimized for converting PCI Adapters to USB 2.0 devices PCI 66 MHz / 32 Bit Interface PCI Host capability for initializing and configuring the existing PCI chip Integrated PCI arbiter to support mastering PCI devices Integrated 8051 CPU @ 30MHz 32K of Shared RAM for emulating main system memory 4 DMA Controllers with Scatter Gather Descriptor capability 14 x 14 mm² Lead-Free QFP package WinXP, Vista, Linux, and WinCE support PLX Technology, Inc. is the leading supplier of PCI Express and standard I/O interconnect silicon to the communications, server, storage, embedded-control, and consumer industries. With an ever increasing number of I/O and bus standards in the marketplace, PLX provides solutions to bridge, isolate, expand, and switch. We support a vast array of standards including PCI Express*, PCI, PCI-X, USB 2.0 as well as local or generic buses. The PLX solution includes a complete combination of high-performance silicon, hardware and software design tools, supported by partnerships throughout the industry. These innovative solutions are designed to enable our customers to develop systems with legacy and industry-leading, cutting-edge products. PLX has been developing I/O interconnect products since 1986. PLX is publicly traded (NASDAQ: PLXT) and headquartered in Sunnyvale, CA, USA. PLX’s European operations are based in the United Kingdom; its Asian operations in China and Japan. PLX Technology, Inc. 870 Maude Avenue Sunnyvale, CA 94085 Tel: 1-408-774-9060 or 1-800-759-3735 Fax: 1-408-774-2169 Email: [email protected] Website: www.plxtech.com © 2006 PLX Technology Inc. All rights reserved. PLX and the PLX logo are registered trademarks of PLX Technology, Inc. ExpressLane, FastLane, PowerDrive and the PowerDrive logo are trademarks of PLX Technology, Inc. which may be registered in some jurisdictions. PCI Express is a trademark of the PCI-SIG. Motorola and PowerQUICC are trademarks of Motorola, Inc. All other product names that appear in this material are for identification purposes only and are acknowledged to be trademarks or registered trademarks of their respective companies. Information supplied by PLX is believed to be accurate and reliable but PLX Technology, Inc. assumes no responsibility for any errors that may appear in the material. PLX Technology reserves the right, without notice, to make changes to product design or application. 06/06