TAPE & REEL PACKAGING OPTIONS RESISTORS MCAPS & COILS MDELAY LINES RCD offers an extremely wide range of taping options to meet all types of applications. Please be sure to indicate the dimensions required, and/or the equipment brand to which the taping must be compatible, when placing your order. Axial lead resistors typically have the leads trimmed prior to taping and therefore the lead length dimensions as listed in the catalog do not apply to taped items. HORIZONTAL TAPING (per EIA RS296D) RCD offers 7 standard tape spacing options, depending on body size. Please advise at the time of ordering if a specific dimension is required, otherwise we will choose one which will leave a lead length of 0.700” (17.8mm) or longer. SIP NETWORK TAPING (an RCD exclusive!) *25.4±1.0 (5-8 pin) 38.1±1.0 (9-12 pin) Min. ←0.700 → [17.8] ↑ ↓ ← Tape Spacing (depends on body length) Pitch (depends on body dia.) 0.200” [5mm] or 0.400” [10mm] ↑ ↑ Tape Spacing Options 1.024” [26mm] 2.062” [52.4mm] 2.500” [63.5mm] 2.874” [73mm] 3.400” [86.4mm] 3.750” [95.3mm] 4.300” [109.2mm] → 18mm ← ← → 12.7 ±0.5 ← 12.7mm → 4mm *All dimensions in mm unless otherwise specified Note: 3 pin SIP taping also offered--consult factory → ← .5±.02 → ← .5±.02 → [12.7±.5] [12.7±.5] .2+.016/-.008 [5+.4/-.2] .2±.02 [5±.5] → ↑ ← ↓ ↑ ← .5±.01 → [12.7±.3] .16±.01 [4±0.3] Highest Density ↑ .16±.01 [4±0.3] ↑ .7+.04/-.02 [18+1/-.5] ← .5±.01 → [12.7±.3] Panasert Avisert .86+.06/-.04 [21.75+1.5/-1] ↓ ↑ ↓ ↓ .7+.04/-.02 [18+1/-.5] .5±.01 ←[12.7±.3] → ↑ ← ↓ ↑ ↓ ↓ .7+.04/-.02 [18+1/-.5] .04[1] Max . .04[1] Max . .16±.01 [4±0.3] ↑ .2±.02 → [5±.5] ↑ ← ↓ ↑ ↓ ↓ .2±.02 [5±..5] → (designed for 1/4W and Mini 1/2W body sizes) (designed for 1/4W body size) (designed for 1/8W and Mini1/4W body sizes) NOTE: Be sure to specify the type of taping required when placing your order. ↓ ↓ .16±.01 ↑ [4±0.3] .04[1] Max . ↑ ← .04[1] Max . .1±.02 [2.5±.5] → .25±.04 ← → [6.35±1] ←→ .63±.04 [16±1] .63±.04 [16±1] .63±.04 [16±1] ↓ ↓ VERTICAL TAPING (1/8W, 1/4W, 1/2W) 12.7 ±0.5 16mm ← .5±.01 → [12.7±.3] .7+.04/-.02 [18+1/-.5] Horizontal Preformed (designed for 1/8W and Mini 1/4W body sizes) SURFACE MOUNT TAPING (per EIA 481) 8mm Tape for use with the following Chip resistors & capacitors Size Series 0201 MC 0402 BLU, CE, FC, MC 0603 BLU, CE, FC, MC 0805 BLU,CE,FC,FLP,HR, MC,MCT 1206 BLU,CE,FC,FLP,HR,MC 1210 BLU, CE, FC, MC MELF resistors MGP45, MGP50, MGP50S MCF10, MCF12, MCF22 ZCF10, ZCF12, ZCF22 Chip inductors CI1008,MCI1210 Surface mount networks/arrays 24mm ↓ 1612 1812 2010 2512 BLU CE, CI, MCI, MSI MC MC MELF resistors ↓ 16mm Tape for use with the following products: M W2 SF1 LCCN14 LCCN16 MELF resistor WW SM resistor SM network SM network MGP55, MGP55S MCF25, MCF25S ZCF25, ZCF25S MBW1/4, MLP25 Surface mount networks/arrays CN2012, SMN 2010, SMN2012 MW1, MWM 24mm Tape for use with the following products: SMN14 SMN16* SMTF16* LCCN20 M WM 2 SMP1410 SMP1610 SMA1405 SMA2805 SMA2810 SM Netw ork SM Netw ork SM Netw ork SM Netw ork WW SM resistor Delay line Delay line Delay line Delay line Delay line 32mm Tape for use with the following products: SMN16* SMTF16* SM network SM network *Available on 24mm or 32mm tape. Please specify preference at the time of ordering. Surface mount wirewounds CN120, SMN1206 32mm ↓ 12mm Tape for use with the following Chip resistors, inductors, capacitors Size Series ↑ ↑ ↑ 16mm ↑ 12mm ↓ ↑ 8mm ↓ NOTE: Tape & Reel packaging is standard for many items and therefore RCD reserves the right to supply parts on tape, even when “bulk packaging” is ordered. RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH, USA 03109 http://www.rcdcomponents.com Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: [email protected] FA specifications subject to change without notice