CC SERIES - RCD Components Inc.

CARBON COMPOSITION RESISTORS
1/4 WATT TO 1 WATT HIGH SURGE
CC SERIES
RoHS
RESISTORSCAPACITORSCOILSDELAY LINES
Term.W
is Pb-free
and RoHS
compliant
 High surge/high pulse capability
 Low inductance/high frequency performance
 Rugged hot molded construction
 1/8W and 2W sizes in development
 Surface mount styles in development
Carbon composition resistors are considered as perhaps the most reliable
of all electronic components. There are no windings or film, resulting in
a truly non-inductive resistor with excellent pulse-withstanding capability.
Hi-Rel Group A Screening per Mil-R-39008 is available (specify option 37).
Note: composition construction isn’t as stable as other types especially in
humid conditions, and therefore isn’t suitable for precision applications.
Refer to RCD’s PR Series for improved environmental performance. Alcohol is recommended instead of aqueous rinsing. Use stress relief when
forming leads.
OPTIONS
 Option 37: Group A screening per Mil-R-39008
 Numerous modifications are available...custom
marking, cut & formed leads, increased voltages,
hot solder dipped leads, etc. Customized components
are an RCD specialty!
←
→← L →
H
d
→D←
↓
↑
RCD
Type
Wattage at
70° C1
Max.
Voltage2
Peak Pulse
Voltage3,4
Joule
Rating3,4
Dielectric
Strength
Resistance
Range
CC1/4
0.25W
250V
6KV
1.8j
500V
CC1/2
0.5W
350V
10KV
6.4j
CC1
1W
500V
14KV
20j
Dimensions Inch [mm]
L±.032 [.8]
D±.016 [.4]
d±.003 [.076]
H (typ.)
1W - 22M (E24)
.250 [6.35]
.090 [2.3]
.024 [.61]
1.0 [25.4]
700V
1W - 22M (E24)
.375 [9.53]
.140 [3.56]
.028 [.71]
1.0 [25.4]
1000V
2W - 1.2M (E24)
.59±.05 [15±1.27]
.225 [5.72]
.034 [.86]
1.0 [25.4]
Derate wattage by 1.25%/°C above 70°C
Rated continuous voltage determined by E= (PR) , E not to exceed the value listed. Increased levels available
Peak pulse (rupture) voltage and joule ratings are dependent on resistance value, pulse wave form and repetition rate. Derate 25-50% for repetitive pulses and improved
stability/reliability. Repetitive pulse average power not to exceed wattage rating. Verify selection by evaluating under worst case conditions. Consult factory for assistance.
1
2
1/2
3
4
CC1/4 Peak Pulse Voltage (6KV Max)4
10KV
1K
100V
1KV
1K
100V
100Ω
1uS
10uS
100uS
1mS
Pulse Width (Sec)
10mS
10Ω
100mS
10V
1uS
10uS
100uS
TYPICAL PERFORMANCE CHARACTERISTICS
Short-time Overload
±2.5%
Temperature Cycling
±2%
Temperature Coefficient
±0.15%/°C
Moisture Resistance
±10%
Shock and Vibration
±1%
Load Life
±10%
Voltage Coefficient
±0.03%/V
Operating Temp. Range
-55° C to + 150° C
APPLICATIONS
1mS
Pulse Width (Sec)
Typical applications include snubber circuits, lightning surge,
grounding resistors, RFI suppression, dummy loads, etc.
Depending on the application, CC resistors can often satisfy requirements of UL217, 268, 294, 497A, 508, 913, 1459, &1971;
IEEE587, C37.90, & C62.41; IEC552, 801, & 1000-4; AAMI
EC11; Bellcore TR 357 & 1089; EN 61000-4, 60601, & 50082.
10mS
1K
100Ω
100V
10Ω
10Ω
10V
100mS
1uS
10uS
100uS
1mS
Pulse Width (Sec)
10m
100mS
TEMPERATURE RISE
60
50
TEMP RISE (°C)
10V
10K
1KV
10K
100Ω
Peak Voltage
10K
100K
100K
Peak Voltage
Peak Voltage
100K
1M
10KV
1M
1M
1KV
CC1 Peak Pulse Voltage (14KV Max)4
CC1/2 Peak Pulse Voltage (10KV Max)4
10KV
CC1/2
CC1
40
30
CC1/4
20
10
0
0.1
0.2
0.3
P/N DESIGNATION:
0.4
0.5
0.6
APPLIED WATTAGE (W)
CC1/2
RCD Type
Options: 37, etc (leave blank if standard)
0.7
0.8
- 101 -
0.9
J
1.0
T W
3-Digit Resis Code: 2 signif. digits & multiplier
(1R0=1Ω, 100=10Ω, 101=100Ω, etc)
Tol Code: J=5% (std on CC1/4 &1/2), K=10% (std CC1),
2% (G) available
Packaging: B = Bulk, T = Tape & Reel A = Ammo Pack
Termination: W=Lead-free (std), Q=Tin/Lead (leave blank if both acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA001H Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
74