POWER THICK FILM ON STEEL RESISTORS TO126, TO220, and TO247, 25 to 100 WATT HDP SERIES RoHS RESISTORSCAPACITORSCOILSDELAY LINES Term.W is RoHS compliant & 260°C compatible FEATURES Industry’s most economical TO-style power resistors! Standard resistance range: 0.05Ω to 10KΩ Standard tolerance: ±1%, ±2%, ±5% ( available to 0.1%) Flame resistant construction Non-Inductive performance Resistor is electrically isolated from the mounting surface OPTIONS Option P: Increased pulse capability Option EQ: 24-hour burn-in at full rated wattage (free air) Option 33: 1KV Dielectric Stength Numerous design modifications are available (special marking, custom lead wires, hi-rel screening, etc). Customized components are an RCD specialty! Award winning design! High power density at low prices! RCD Series HDP resistors were designed to offer precision performance in TO-126, TO-220 and TO-247 style packages. The cost effective design features an oxidized stainless steel carrier which is insulated with a proprietary hi-temp dielectric upon which the resistive film and solder pads are deposited. This enables reduced thermal resistance over conventional ceramic or ceramic/copper sandwich designs, resulting in increased power and overload capability (pulse graph available). The resistive film is insulated with a specialty flame resistant coating offering superior environmental protection. TYPICAL PERFORMANCE CHARACTERISTICS → ↓F ↑ ↑ C ↓ A ← ↑ G ← →← D E → .120” [3] Load Life ±1% Moisture Res.(Mil-Std-202 M106) ±0.5% B Thermal Shock (Mil-Std-202, Method 107 Cond.C Overload (2x W, 1Sec, nte1.5x Max V) ±0.3% ↓ Terminal Pull Strength 5 lbs direct, 2 lbs peel Temp.Coefficient 0.5Ω & above 0.05Ω 0.49Ω Dielectric Strength 1 Insulation Resis. 1 100ppm (50& 80ppm opt.) 200ppm (100ppm opt.) 750V Std. (Opt.33= 1KV) 1000M min. Operating Temperature Range -55°C to +200°C .040” [1] 1 ±0.3% Between two terminals and mounting surface, DCV SPECIFICATIONS RCD Ty p e Wa tta g e @ 2 5 °C HDP126 25W (2W free air) 300V3 HDP220S2 40W (2.5W free air) HDP220 HDP247 2 Ma x . R e s is t a n c e Vo lta g e R ange D IM E N S ION S A B C D E F Typ . G Typ . 0 .0 5 Ω - 1 0 K 3 .0 9 1 ± .0 1 [2 .3 ± .2 5 ] .3 2 3 ± .0 1 2 [8 .2 ± .3 ] .2 0 0 ± .0 1 2 [5 .0 8 ± .3 ] .9 4 0 Mi n. [2 4 ] .4 6 5 ± .0 1 2 [11 .8 ±.3 ] .0 3 1 [.8 ] .0 9 8 [2 .5 ] 300V3 0 .0 5 Ω - 1 0 K 3 .11 7 ±.0 1 [3 ± .2 5 ] .4 0 0 ± .0 1 2 [1 0 .1 6 ± .3 ] .2 0 0 ± .0 1 2 [5 .0 8 ± .3 ] 0 .5 Mi n. [1 2 .7 ] .6 0 0 ± .0 1 2 [1 5 .2 4 ± .3 ] .0 3 1 [.8 ] .1 4 2 [3 .6 ] 50W (3W free air) 300V3 0 .0 5 Ω - 1 0 K 3 .11 7 ±.0 1 [3 ± .2 5 ] .4 2 5 ± .0 1 2 [1 0 .8 ± .3 ] .2 0 0 ± .0 1 2 [5 .0 8 ± .3 ] .9 4 0 Mi n. [2 4 ] .6 5 0 ± .0 1 2 [1 6 .5 ± .3 ] .0 3 1 [.8 ] .11 8 [3 ] 100W (5W free air) 350V3 0 .0 5 Ω - 1 0 K 3 .1 5 6 ± .0 1 [4 ± .2 5 ] .6 3 0 ± .0 1 2 [1 6 .0 ± .3 ] .4 0 0 ± .0 1 2 [1 0 .1 6 ± .3 ] .9 4 0 Mi n. [2 4 ] .8 2 0 ± .0 1 2 [2 0 .8 ± .3 ] .0 3 1 [.8 ] .1 4 2 [3 .6 ] Information on HDP220S is preliminary 3 Extended range available P/N DESIGNATION: POWER RATING Power rating is based on the resistor being tightly screwed to a suitable heat sink (with thermal compound) to limit hot spot case temperature to 200°C. Derate wattage by .57%/°C above 25°C (as depicted in chart below). Mounting torque not to exceed 8 in-lbs. Request Applic.Guide R34 for additional information concerning heat-sink resistor mounting guidelines. % OF RATED POWER In c h [ m m ] 100 HDP220 - 1001 - F B W RCD Type Options: P, EQ, 33, etc (leave blank for std) Resis.Code 1%: 3 signif. figures & multiplier, (R010=.01Ω, R100=.1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K) Resis.Code 2%-10%: 2 signif. figures & multiplier, (R01=0.01Ω, R10=0.1Ω, 1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K) Tolerance Code: J = 5%, G = 2%, F = 1% 80 60 Packaging: B = standard (bulk) 40 Optional Temp. Coefficient: 50 = 50ppm, 80 = 80ppm, 101 = 100ppm (leave blank for standard) 20 0 25 50 75 100 125 CASE TEMPERATURE (°C) 150 175 200 Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable, in which case RCD will select based on lowest price and quickest delivery) RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected] FA047C 79 Sale of this product is in accordance with GF-061. Specifications subject to change without notice.