CL - RCD Components Inc.

.
THICK FILM SIP NETWORKS
CL SERIES - Low Profile
C SERIES - High Power
.
.
.
.
DIMENSIONS
^^
^
^^
^
^^
^
^^
^
^^
^
^^
^
^^
^
→
.095 [2.4] Max.
Opt. N= .070±.008
[1.8±.2]
^^
^
.
^^
^
.
^^
^
.
RCD C101
increased power & voltage, tolerance & TC matching, longer pins,
special marking, military screening, resis. values 1Ω to 1000M, etc.
Std. Config. No.2 (Global Config.B)
^^
^
.
.
RCD CL101
 OPTION V - +200°C temperature Range
 OPTION S - Super high density (.070” pin spacing)
 OPTION P - Pulse tolerant design
 OPTION N - Narrowline design (.070” thick)
 OPTION F - Flameproof coating
 OPTION C - Copper alloy terminals
 Available in custom circuits with multiple values/capacitors/diodes,
STANDARD CONFIGURATIONS
1
RESISTORSCAPACITORSCOILSDELAY LINES
←High density 70-mil pin spacing, an RCD exclusive!
Term.W
 Low cost! Widest selection in the industry!
is Pb-free
and RoHS
 Low profile CL Series available from stock
RoHS compliant
(config.1 & 2, 6-pin,8-pin,and 10-pin)
 Wide resistance range: 10Ω to 3MΩ
 Available on tape & reel
 4-pin through 14-pin standard (2 through 20-pin available)
 R/2R Ladder Networks (Config. 7) offer 1/2LSB accuracy
from 4 to 10 bits
Std. Config. No.1 (Global Config.A)
RCD CL101S
←
←Max length=0.1” x No. of pins→
↑
C=.315 [8] Max.
CL=.195 [5] Max.
Pin #1
Standard Configuration No. 3
.
.
.
.
^^
^
^^
^
^^
^
^^
^
Std. Configuration No. 6
vvv vvv vvv
vvv
R
R
↑ .102 [2.6] Min.
↓
→← →
←.100 ± .01 [2.54 ± .25] Opt.
.020 [.5]
SINGLE RESISTOR
POWER RATING*
RCD
Type
^^
^
2R
2R
2R
Config.
3, 7
PACKAGE POWER RATING*
Config.
1,3,4,5,6
Config.
2
C
.3W
.5W
.17W
1W
CL
.2W
.3W
.125W**
.5W
R
^^
^
2R
↓
S=.070± .01 [1.78 ±.25]
^^
^
2R
→←
.008
[.2]
Min
Dimensions: Inch [mm]
vvv vvv vvv
^^
^
1
1
.011 [.28]
Std. Config. No.7 R/2R
^^
^
^^
^
^^
^
^^
^
^^
^
1
.
^^
^
Std. Configuration No. 5
1
.
^^
^
^^
^ ^^
^
. .
R2 R2
. .
R1
. R1.
^^
^ ^^
^
.
R2
.
R1
.
^^
^ ^^
^
.
R2
.
R1
.
^
^^
^ ^^
.
R2
.
R1
.
^
^^
^ ^^
^^
^ ^^
^
.
R2
.
1 R1.
Standard Configuration No. 4
4-Pin 6-Pin
7-Pin
1.5W 1.75W
1W
8-Pin
9-Pin
10-Pin 12-Pin
2W
2.25W
2.5W
3W
1.75W
2W
2.5W
1.25W 1.5W
* 25 deg C. Reduce wattage ratings by 1/3 for Opt.S **Config. 7 n/a in CL Series
MSB OUT
STANDARD VALUES- Config. 1, 2, 4, 5, 6:
DERATING
22Ω to 1M* in E-24 values (preferred values in bold type)10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47,
51, 56, 62, 68, 75, 82, 91 *non-standard values 10Ω to 3M avail.
% OF RATED POWER
120
100
80
60
40
20
0
STANDARD VALUES - Config. 3, Dual Terminator, R1/R2
81Ω/130Ω
160Ω/260Ω
220Ω/270Ω
330Ω/470Ω
120Ω/195Ω
162Ω/260Ω
220Ω/330Ω
330Ω/680Ω
121Ω/195Ω
180Ω/390Ω
330Ω/390Ω
3KΩ/6.2KΩ
R/2R LADDER NETWORKS (Config.7): 4Bit/6-pin, 5Bit/7-pin,
6Bit/8-pin, 7Bit/9-pin, 8Bit/10-pin, 9Bit/11-pin, and 10Bit/12-pin. Available
in Series C (low profile Series CL n/a). Linearity accuracy is 1/2LSB.
Standard values are 5KΩ, 10KΩ, 25KΩ, 50KΩ, & 100KΩ ±2%.
P/N DESIGNATION:
CL 08 2
- 102 - G B
CL= low profile (std), C= high power
Number of Pins
Configuration Number
Options: V, S, P, N, F, C (leave blank if std)
Resis.Code 1%: 3 signif. figures & multiplier,
(e.g. 10R0=10Ω, 1000=100Ω, 1001=1K, 1004=1M)
Resis.Code 2%-5%: 2 signif. figures & multiplier,
(e.g. 100=10Ω, 101=100Ω, 102=1K, 103=10K, 104=100K,
105=1M). When comprised of 2 res.values (config.3&7) separate
with /, e.g. 181/391=180Ω/390Ω; use 4-digit code when needed
e.g. 1620/261=162Ω/260Ω
Tolerance Code: G=2% (standard), F=1%, J=5%
Packaging: B=Bulk, A3=3 pin taping Ammo pack, M=Magazine Tube
Opt. TC: 50=50ppm,101=100ppm (leave blank if standard)
Termination: W= RoHS compliant (std), Q= Tin/Lead (leave blank if both acceptable)
W
(Series C and CL)
25
50
75 100
125 150
AMBIENT TEMPERATURE (°C)
% OF RATED POWER
GND LSB
DERATING
120
100
80
60
40
20
0
(Option V)
25 40
80 120 160 200 240
AMBIENT TEMPERATURE (°C)
TYPICAL PERFORMANCE SPECIFICATIONS
Standard Tolerance
2% >=100W , 5% <100W (1% avail.)
Temperature Coefficient
±100ppm typ (±250ppm <50W & >2.2M)
TCR Tracking
50PPM typical
Operating Temperature
-55°C to +125°C (+200°C Opt.V)
Max. Working Voltage
200V Series C, 100V Series CL & Opt.S
Short Time Overload
±0.5% (2.5x rated V, 5S, nte 2xW)
Resistance to Solder Heat
±0.25% (350°C, 5S)
Moisture Resistance
±1%
Terminal Strength
±0.25%
Thermal Shock
±0.5%
Load Life (1000 hours)
±1.0%
Temperature Cycling
±0.5%
Shock and Vibration
±0.25%
Lead Solderability
Meets MIL-R-83401
Marking*
Pin #1 ID, resis value, & tol as minimum*
Terminals
Solder plated steel typ., copper alloy avail**
*Parts may be marked with Std or Global configuration code
** RCD recommends use of copper alloy terminals (opt. C) in aqueous cleaning systems
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA032D
Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
38