RENESAS UPD720200AF1-DAP-A

Product Brief
USB3.0 Host Controller
μ PD720200A
The μPD720200A is the second generation Universal Serial Bus 3.0 host controller,
which complies with Universal Serial Bus 3.0 Specification, and Intel’s eXtensible Host
Controller Interface (xHCI).
The μPD720200A uses a PCI Express® Gen 2 system interface bus allowing system designers to easily add up to two USB3.0 SuperSpeed
interfaces to systems containing the PCI Express bus interface. When connected to USB 3.0-compliant peripherals, the μPD720200A can
transfer information at clock speeds of up to 5 Gbps. The μPD720200A and USB 3.0 standard are fully compliant and backward compatible with
the previous USB2.0 Standard. The new USB 3.0 standard supports data transfer speeds of up to ten times faster than those of the
previous-generation USB2.0 standard, enabling quick and efficient transfers of large amount of information.
Block Diagram
USB3.0
SS Link
Super-speed
Controller
Interface
PCI Express
Gen2 Interface
(x 1)
PCI Express
Port
USB3.0
SS Root hub
Power SW
I/F
xHCI
Controller
High-speed
Controller
Interface
USB2.0
SIE
USB2.0
Root hub
Full/Low-speed
Controller
Interface
3.3 V
1.05 V
USB3.0
(Super-speed)
PHY
OSC/PLL
SPI
Interface
24 MHz Xtal
48 MHz clock input
External
Serial ROM
USB2.0
(HS/FS/LS)
PHY
USB Port1
(SS)
USB Port2
(SS)
Port Power
Control
USB Port1
(HS/FS/LS)
USB Port2
(HS/FS/LS)
USB 3.0 Host Controller μPD720200A Specification
Differences with the first generation μPD720200
z
System clock : 24 MHz crystal or 48 MHz external clock
z
Improved power consumption
z
3.3 V and 1.05 V Power supply
z
Pin compatible with the first generation μPD720200
Part Number
μPD720200AF1-DAP-A
Features
z
z
Universal Serial Bus 3.0 specification Revision 1.0
Package
z
PCI Express Base Specification Revision 2.0
z
z
Intel’s eXtensible Host Controller Interface (xHCI) Specification
Target Systems
Revision 0.96
z
Desktop and Laptop computers
z
PCI Express Card Electromechanical Specification Revision 2.0
z
PCI Express Card / Express Card
z
PCI Bus Power Management Interface Specification Revision 1.2
z
Docking Station
z
Support USB legacy function
z
Server
z
Supports Serial Peripheral Interface (SPI) type ROM
R19PF0029EJ0100
176-pin plastic FBGA (10 x 10 mm, 0.65 mm ball pitch)
Rev. 1.00
Renesas Electronics Corporation
www.renesas.com
2010.09
Notice
1.
2.
3.
4.
5.
6.
7.
All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”:
8.
9.
10.
11.
12.
Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”:
Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.