RF103L2S Diodes Fast recovery Diode RF103L2S !External dimensions (Unit : mm) !Applications High frequency rectification !Features 1) Small power mold type (PMDS) 2) Ultra low VF 3) Very fast recovery 4) Low switching loss 2 3 4 4.5±0.2 1 5.0±0.3 1.2±0.3 1.5±0.2 CATHODE MARK 0.1 +0.02 −0.1 2.0±0.2 2.6±0.2 !Construction Silicon epitaxial planar ∗ 1 , 2 ···Type No. 3 EX. RF101L2S EX. 2003,09 , 4 ···Manufacturing date → → 6,6 3,9 !Absolute maximum ratings (Ta=25°C) Parameter Reverse voltage (repetitive peak) Reverse voltage (DC) Average rectified forward current ∗ Forward Peak surge current (60Hz 1cyc.) Symbol Limits Unit VRM 200 V VR 200 V IO 1.0 A IFSM 20 A Junction temperature Tj 150 °C Storage temperature Tstg −40 to +150 °C ∗ Mounting on glass epoxi board !Electrical characteristics (Ta=25°C) Symbol Typ. Max. Unit Forward voltage VF 0.860 0.920 V Reverse current IR 1.2 10 µA Parameter Conditions IF=1.0A VR=200V IF=0.5A Reverse recovery time trr 9 20 nS IR=1.0A + Irr=0.25 IR 1/2 RF103L2S Diodes !Electrical characteristic curves (Ta=25°C) 1 AVERAGE RECTIFIED CURRENT : IO (A) 1000 REVERSE CURRENT : IR (µA) 0.1 125°C 0.01 75°C 25°C −25°C 0.2 0.4 0.6 0.8 0.1 −25°C 0.01 0 1 25°C 1 50 100 150 IO 1.8 1.6 0A 0V DC VR t D=t / T VR=200V Tj=150°C T 1.4 1.2 1.0 D=1/2 Sin(θ=180) 0.8 0.6 0.4 0.2 0 0 200 25 50 75 100 125 REVERSE VOLTAGE : VR (V) AMBIENT TEMPERATURE : Ta (°C) Fig.1 Forward temperature characteristics Fig.2 Reverse temperature characteristics Fig.3 Derating curve 25 1.2 1.0 DC D=1/2 Sin(θ=180) 0.6 0.4 0.2 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 sin wave IFSM FORWARD POWER DISSIPATION : PF (W) 75°C 10 2.0 FORWARD VOLTAGE : VF (V) 1.4 0.8 100 20 8.3ms 8.3ms 1cycle 15 10 5 0 1 10 100 AVERAGE RECTIFIED FORWARD CURRENT : IO (A) CYCLE Fig. 4 Power dissipation characteristics Fig.5 Powerd peak surge current CAPACITANCE BETWEEN TERMINALS : CT (pF) 0.001 0 SURGE FORWARD CURRENT : IFSM (A) FORWARD CURRENT : IF (mA) 125°C 150 100 10 0 0 5 10 15 20 25 30 REVERSE VOLTAGE : VR (V) Fig. 6 Capacirance between terminals characteristics 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0