CERAMIC DISC CAPACITORS Class 4 Series: Spark Gap INTRODUCTION RoHS FEATURES Spark Gap capacitors are designed to provide a reliable discharge path for stray, transient overvoltages and static voltage build-up. The construction of spark gap may enable the circuit designer to reduce costs by specifying lower voltage components. • Limited values • Designed especially for spark gap application L LS±1.0 D DIMENSIONS (mm) Maximum Disc Diameter Cap .75pF Code R75 .001mF 102 .01mF .02mF 103 203 Voltage V 1KV, 1.5KV, 2KV Lead Spacing (LS) 6.35 Diameter (D) 9 Length (L max) 13 Thickness (T max) 6.35 9.50 12 26 6.35 9.50 9.50 20 24 26 27 6.35 6.35 2KV 1.5KV, 2KV, 2.5KV 1KV ELECTRICAL CHARACTERISTICS Technical Data Condiditon Measured at 1 KHZ, 1VRMS at 25°C Capacitance Dissipation Factor tan d Encapsulation Specification 0.75pF ~ 0.02mF 2.5% max Phenolic Wax 7500MW or R x C > 75W x F +10 ~ +85°C -30 ~ +85°C ±10% (K) ±20% (M) Guarantied max value (U) Guarantied min value (V) Standard Insulation Resistance Measured at 500 Vdc Z5U Y5P Operating Temperature Available Tolerances PART NUMBER EXAMPLE 4 YP R75 V 102 A67 B Temperature Coefficient Capacitance Code Tolerance Code Packing Code Lead Code Voltage Code VOLTAGE CODE EXAMPLE TEMPERATURE COEFFICIENT CODE Code EIA Code Temperature Characteristics ZU Z5U +22 to -56% YP Y5P ±10 % +10 °C to +85°C Code WVDC 102 1V 152 1.5V -30 °C to +85°C Page 1 of 2 C1BE04 2012.03.08 CERAMIC DISC CAPACITORS Class 4 Series: Spark Gap RADIAL STRAIGHT-LEAD ON TAPE (S56 LEAD CODE) RoHS REEL PACK (R SUFFIX) RADIAL KINK-IN ON TAPE (K56 LEAD CODE) *Most Popular 53±1 30±1 f360 max 253±5mm AMMO PACK (A SUFFIX) m 3m ± 48 mm ±5 330 LEAD CODES FOR BULK PACK (CERAMIC DISC ONLY) Lead Type C-Kink In A-Straight D-Kink Out 3.0mm 25.4mm min 4.8mm max 4.8±1mm 4.8mm max 4.8±1mm F-Special Length Y-Y Formed Per Customer Specification S & K-Taped See taping specifications 4.0 mm max 4.8 ±1.0 mm above. Lead Spacing Wire dia. (±1.00) in mm (±0.05) in mm Code 2 5 6 7 9 0 A P 2.5 5 6.35 7.5 10.0 12.7 15.0 Code df 4 0.48 6 0.6 7 0.65 8 0.8 9 1.0 HOW TO MAKE THE LEAD CODE FOR CERAMIC DISC (FOR BULK PACK ONLY) A67B Bulk Wire Dia. Lead Spacing Lead Type Code Dimensions D 11.0 max d 0.6 ±0.05 P 12.7 ±1.0 P0 12.7 ±0.3 P1 3.85 ±0.7 P2 6.35 ±1.3 F 5.0 +0.8 -0.2 Dh 0 ±2.0 W 18.0 +1.0 -0.5 W1 9.0 +0.75 -0.5 W2 3.0 max H 18.0 +3.0 -0 H0 16.0 ±0.5 H1 32.25 max K 1.0 max D0 4.0 ±0.2 t 0.7 ±0.2 L 11.0 max Page 2 of 2 C1BE04 2012.03.08